repair without the involvement of experts - is, first of all, a significant reduction in costs, because often the work of a professional at times exceeds the cost of building materials.Do not worry if you have to repair their own hands for the first time to do all the work, if you follow the simple instructions.
instructions how to glue the ceiling moldings will help you make the junction of wall and ceiling tiles acquire aesthetic appearance and close the flaws and irregularities of the walls.
Choice ceiling moldings and the calculation of the required number of
Tip!Before pokleit ceiling moldings properly, you need to calculate the amount.To do this, measure the perimeter of the room papered and the resulting number divided by 2 meters, based on the fact that the standard length of each fillet - 2metra.
- Now you need to decide the width of the plinth , this figure depends on how high the ceilings in the room, the width increases in proportion to the fillet height ceilings, for example, for high ceilings 2.75 meters most suitable skirting a width of about 45mm.
Now about relief fillet: the strikingly quirk, the harder it is to look after it is deposited dust soon spoil its appearance.
correct sticking ceiling moldings with their hands
At home, there are two types of installation:
- mount ceiling moldings on the glue, such as "the time of installation," or white acrylic sealant directly on the wallpaper, after gluing;
- mount ceiling moldings on the putty or acrylic sealant immediately after equalization and priming the walls before wallpapering.
Despite the fact that the first version of the fastest, easiest, most reliable is the second option.Because I do not have to remove the plinth, if you want to change the wallpaper.
How gluing ceiling moldings using the miter box:
- Mitre - is a tool that is used to obtain the required angle (cut) .
For miter box should be used in addition to:
- sharp knife (can be wallpaper) or saw for metal;
- small spatula ;
- putty and capacity for its mixing .
for infrequent use, you will need the most simple unprofessional miter box that allows you to do under sections 90 and 45˚ , are sold in any hardware store.Its price is very low, if you do the repair at least once in a few years, it is easier to buy it.
- Before sticking properly plinth ceiling, it must be properly cut.For training can make a template for this we need 2 small segment of the fillet (less than 10 cm).
made 2-3 cut yourself, you already understand how to work on.
Tip!Positioning plinth in stuslo need just as it will be fixed to the wall, ie, the bottom edge is pressed against the wall, and the top edge aligned.
- Trim the plinth desirable metal saw, at the same time put pressure on it not to be, it can lead to chipping, which will exclude the use of the fillet.
- Before properly glued ceiling skirting in a straight line, you need to stick the corners.At the same time we must try to factory ends of fillets were in the joints between the connectable segments, it will give accuracy and make them virtually invisible.
- Ideal for how to glue on ceiling moldings primed surface - is using a finishing putty.It does not really matter what it will be firm.
- Before stick right to the finish ceiling moldings filler, the place where the will to adhere quirk, it is necessary to moisten with water. This measure is necessary to putty dry out less quickly, this will facilitate mounting.
- SHpatlevku breed according to the instructions.A small number of fillings put on the reverse side of the fillet evenly distribute it across the surface and pressed against one side of the point of attachment to the ceiling, the other - to the wall.
presses.Excess putty, which will come out, gently remove with a spatula.
- place where we have attached to the surface of the plinth, you must glue putty and zamyt wet cloth.
- slots need to be repaired again after the putty dries.
How to glue the plinth to ceiling acrylic sealant?
Pros and cons:
- With sealant to glue the plinth is much easier, but more expensive.If the filler is usually left after aligning the walls, but the sealant will have to buy the same.
- For smaller rooms, an area of 20 square meters, will be sufficient to two packs and a sealant assembly handgun.
- With sealant sticking ceiling moldings properly just like putty.The slots also smeared her hands at the same time you need to moisten.
How to glue the plinth ceiling without miter box
If there is no possibility to use a miter box, you can:
- Craft homemade miter box of edged board, it will be the cheapest, but not the easiest option ;
- can do without undercutting the baseboards in the corners, because now you can easily find on sale specific areas.Using them reduces the time when work on a sticker baseboards;
- Fixing plinth is exactly the same, using acrylic sealant, glue or putty finish.
How to glue the plinth at the ceiling without the use of additional tools to understand a snap, you can watch video on the Internet, like the pros do.