properly decorated ceiling emphasizes harmony and complement the overall style of the room.A good selection of colors, textures, selecting the number of levels helps to create a stylish ceiling plasterboard and saves on lighting.
So where to start, than to paint the ceiling of plasterboard, which paint to buy and how much to these questions there are answers in the article.Step by step instructions to submit a detailed implementation of these works.
necessary materials and tools
each job should be well organized. It starts with pre-purchase the necessary materials and tools.
cleaning, adjusting, trimming inventory availability.Weighing, the superficial surface or on the entire surface of the package is indicated by the manufacturer.
Materials and tools for preparing and staining the ceiling:
- Dry mixes used indoors with normal humidity and positive temperature 5 to 30 degrees for sealing seams, joints, holes from the screws and fix defects, cracks, potholes;
- Putty latex is applied to the drywall without primer on the cleaned surface from dust;
- primer serves as protection for the gypsum board (GCR) and the basis for a reliable application of paint (sm.Gruntovka ceiling - a useful necessity);
- latex paint will provide a varied palette of colors or aqueous dispersion has a moisture repellent properties and pollution wiped clean cloth or brush;
- Kohler one or more of water-based paint;
- Clothing , you do not mind dirty, headgear;
- Wide (400-500mm) and narrow (40-50mm) spatulas for preparations;
- grinding mesh №100-120 , the smaller the number, the greater the cell and sanding pad;
- fur roller long handle and a short nap;
- Paintbrush staining for corners and hard to reach places;
- Paint tray.
Note: Import paint have better coverage than domestic and requires fewer layers 1-2, 3-4 analogue of our layer.
Preparation of the ceiling drywall to painting
Preparatory work includes the preparation of a variety of solutions for sealing seams, joints, holes from the screws, putty under the rough finish of the ceiling. decades perfected an economical way to get the desired result in the preparation of gypsum ceiling for painting - one layer of putty, smoothing and finishing coat.So
- In pure water at room temperature diluted material for sealing of joints on the figure that is the consistency of sour cream home;
- special tapes serpyanka for more putty joints drywall surface.It is glued or putty before or immediately after the first in the dried up layer of putty;
- Sticky serpyanka zashpaklёvyvaetsya thin, dried, proshkurivaetsya and soil;
- Sometimes serpyanka does not want to stick and constantly falls from the seam.Then the seam to be reinforcement, greased with glue polyvinyl acetate (PVA) and a spatula is pressed to the seam tape, glue is added if necessary;
- angles taping, cut into strips that go on each other overlap;
- By serpyanka true building bandage.It has a structure smaller than the reinforced serpyanka and glued on the surface similar to PVA glue.
- ready solution for rough putty plasterboard ceiling.In 1/3 of a bucket of water is gradually added filler.Stirring is performed or an electric mixer, or with improvised means.
Should get a uniform consistency of very thick cream.The solution advocated by 5 minutes and again whipped.
Note: The prepared solution is produced at a time, the remains are released, due to the loss of its original properties with repeated use.
- With a large spatula putty is applied and stretched across the surface of the same layer of 1-2 mm.This operation is done quickly in order to avoid the appearance of cracks;
- leveling ceiling construction rule for beginners should be performed prior to the acquisition of sufficient experience.He also allows you to immediately flatten the layers and cut the protruding fillers, small spatula that goes back into the tank.
tool supports constantly wet. ceiling dries 24 hours, and all the bumps that are visible on the following day, gently removed a small spatula like a chisel Rough putty ceiling is over.
before the final drying of the ceiling there is a break in the work.GRINDER ceiling grid for further finishing putty, carefully removed the dust with a broom or brush;
- primer is prepared, as in the previous case.The bucket is mixed dry mixture is a primer or satin-finish plaster or putty.
Small trowel solution is evenly distributed over the surface of a large spatula, and the same techniques applied to the ceiling. You can buy ready-made putty finish, if you do not want to mess with dry mixes .Application
ready solution allows you to have a perfectly smooth structure.Skill, accuracy, absence of haste, high-quality materials are the components of a good result;
- For mirror surface, made final finishing sanding block last layer, after drying;
- 4 to 7 days can be tightened during the complete drying of the ceiling.The color is determined by the willingness of the ceiling, it should be no dark spots, and have a smooth matte color.
Caution: Safety goggles, respirator or a gauze bandage will protect the eyes and the respiratory system of small particles and dust.
painting ceilings plasterboard
final stage of the repair in a single room suited to logical end.We stopped at the ceiling painting with latex paint (see: How do paint the ceiling latex paint yourself ).
- Carefully stir in the open can of paint to obtain a homogeneous liquid;
- adding color scheme, we obtain the desired color, if thickish paint, diluted with water;
- paint brush, stained with the binder by hard to reach places, corners and areas adjacent to it;
- wetted roller in a paint bath is rolled out on a ribbed surface to remove excess paint;
- roller completely dipped in paint;
- parallel window to apply the first coat of paint;
- Each following band "sets" of 10-15 centimeters to the previous;
- coloring of drying surface of the ceiling is not recommended, gets a divorce or stains;
- first coat of paint has dried, continued painting the second layer.Layers are formed perpendicular to the lower layer from the window to the opposite side.A uniform, smooth coating.
- painting in 3 layers has its own scheme - the first layer is applied vertically, the other horizontally, vertically The last package.
Warning: Do not interrupt the process of painting and change the roller, the track is as a fingerprint, is unique and unique.
gypsum ceiling painting is completed, that's really really "afraid of eyes and hands do."Retail littered with proven brand quality goods for the construction, decoration, painting.
On the site contains detailed and interesting information on all issues.