Upon entering the room in the first glance falls on the ceiling.From that, he will be issued depending cozy and comfortable stay in it.
With ceiling can give a room a unique look or divide the whole space into zones, even if you run a low-cost finishing a painting.It is important that the correct roller to paint the ceiling to the finish design looks perfect and without flaws.
What is the advantage of painting?
Today there is a very large number of ceiling coverings.But the biggest popular painted ceiling.
He can fit into any interior design.The photo shows examples of interior decoration, the ceiling of which just painted.
Paint the ceiling with a variety of colors:
- water based paints.
- varnishes and others.
reference.Just as there are different kinds of paint tools to the ceiling, and the process of painting can be done in different ways.For example, one type of paint suitable for concrete, the second plasterboard.
What you need to consider before painting:
- When selecting a tool, which will be worth considering painting and ceiling design.
- You can paint with a brush or roller.It is also very often used for this purpose gun.
- use of the latter method greatly saves time.
roller painting the ceiling is quite a lengthy process and can be used on any surface, even in remote places, where better use of additional tools (brushes of different sizes).
Tool selection for painting the ceiling
Before painting the ceiling of the platen, it is necessary to choose the right type of a tool.All rollers are distinguished by their functionality, ink absorbency, and of cost.Why
ceiling paint roller will be better?
For one simple reason:
- Once the ceiling or any other surface of the paint is applied with a brush, then there are traces of such work, and they can not be painted over.
- After application roller is no trace, as it uniformly distributes the paint on the surface.
Today, manufacturers produce only three rollers.The price of different bottoms.All depends on the name of the manufacturer and from the quality of the instrument.
rollers can be:
Council.When choosing the type of roll you should pay special attention to the packaging, if it exists.You also need to pay special attention to the manufacturer.
quality tool - it does not mean the world-famous name of the manufacturer.Most often cheaper to paint the surface of the rollers may be several times better than the most expensive.
Foam rollers are more popular.But the builders prefer them last.
Nobody talks about the poor quality of the instrument.Just on the surface of it may remain after traces of paint, though it distributes evenly coat of paint tools.
All this happens for the reason that the foam absorbs very well liquids and when the paint layer is coated on the surface, then it immediately absorbs it (not completely).
velor roller with properties similar to foam.They also absorb moisture well.
They also make a good painting.But do not forget about some of the traces of which can remain on the surface.
course, the choice of these two types of roller painting in most cases depends on the skill and experience of the expert.They can work experienced painter who know many nuances in the paint.
The best version of this tool are fleecy rollers.They perfectly absorb any type of paint.
on the surface will not be going the extra paint.Roller layer is applied so easy.
also not on the surface of it remain traces.But it is worth paying attention to the ceiling surface.
Council.If the surface of the concrete flow and not well treated, it is necessary to give preference to the roller with a long nap.
How to choose the correct roller
Before buying velor or foam roller you need to check their quality.To do this, carefully review all joints seams material.
They should not be too visible.From this will increasingly depend on the quality of painting.
If you choose nappy cushion, it is necessary to check its quality as:
- villi Pull over and see whether remains of any part in the hand.
- also inspects the seams material.
- This will determine not only the quality of the painting, but the absorption of the instrument itself.
Considering all the above, we can conclude that before a roller to paint the ceiling, you need to initially assess the condition of the roof surface, and to choose the right type of instrument.
Surface preparation for painting
That's how to be prepared surface for painting depends on the quality of the work.There are several types of ceiling surfaces: concrete and plasterboard.
Before painting the ceiling of the roller, the surface must be carefully handled.You can do it with your hands and not to resort to professional help.
Concrete surface preparation
Concrete ceiling surface today has become increasingly rare.Paint roller ceiling of this type does not take long.
- initially need to assess the condition of the surface.If it has layers of old paint, it would be better to carry out their wash.
- These actions are only possible with a variety of special materials.They are applied to a layer of paint brush.
- must undergo a period of time after that, and she will keep the paint from the surface.
- If at one time it is impossible to get rid of old paint, then such actions are made to eliminate it from the surface.
- Usually on the package of such funds have very clear instructions, and according to which should perform a wash.
Council.With regard to whitewash the ceiling, then rinse it can be pre-prepared solution of vinegar.The surface of the ceiling again thoroughly washed ordinary detergent, dried and only then it will be possible to apply new layers of paint.
With vodoemulsionkoy things are much easier, as this type of paint is based on water.It is simply washed with the ceiling surface normal water using detergent.
True, this process is very long and it is for this reason rationally use the same wash was like paint stripper, only to operate it was a little weaker.
worth noting that before the roller to paint the ceiling, will have its concrete surface, apply a layer of primer and impregnation (sm.Gruntovka ceiling - a useful necessity) to paint took much better.
Prepare plasterboard ceiling
surface of the ceiling, as a rule, it is not subject to long-term training.Plasterboard is very good at keeping themselves all types of paints.
- The only thing you need to pay special attention before ceiling paint roller, it seams sheet finishing material.
- They should be invisible.That is, their pre-coat with putty before painting.
- Such actions are carried out on the hats of screws that secure the plates to the frame material.
Council.On this surface it is also necessary to apply a primer to ensure good toughness surface for applying layers of paint material.
process of painting the ceiling roller
How to paint the ceiling a roller?Many question arises during repair work.
In this process, there is nothing difficult.No any instructions on how to paint ceiling roller.
may be only some of the rules of the painting, which is recommended to follow.
For painting the ceiling with a roller need:
- roller 2 (large and small).
- 2 brush (large and small).
- Foam or rags.
Council.As for the size of the rollers and brushes, it is necessary to give preference to medium size.For example, a large roll can be 30 cm, small - 15 cm.
On how comfortable working with the instrument will depend on the quality of painting.Since specific instructions about how to paint ceiling roller does not exist, it is best to follow the advice of experienced professionals in this field.
Stages of work:
- initially is to determine whether the ceiling various decorative elements (ceiling moldings or cutter) because the painting process begins with them.They are painted with a brush.
- For this brush itself must be of appropriate size, it was convenient to apply layers of paint. All this is necessary, so you do not spoil as a result of painting such decorations of all kinds have uniformly colored, the ceiling, as the mills are often very complex design and prokraska will also be difficult.
- Now the most basic - how to paint ceiling roller?The process begins with a set of paints.
dipped in the paint roller is necessary to handle it.The tool then blotted thoroughly to get rid of excess paint and only then can they paint the ceiling surface.
Since the roller will not be able to get it and to paint hard to reach areas, for the color of their need to use a brush.
- As roller to paint the ceiling?To begin the process you need to paint the front door to protect themselves from what will be visible traces of paint.
- All movements should be smooth.Each "rolling" on the ceiling must go to the previous.
Do not immediately after drying spaces on the ceiling, which had not been painted over paint.You must re-apply another coat of paint to hide the defects after painting earlier.
Council.How to paint the ceiling a roller?If you have to start the process of painting, it can not be interrupted for a long period of time.
During this time, the paint can dry (vodoemulsionku), and the difference will be visible on the surface (some part will be lighter, but some - darker).
In order to avoid the question arises how to paint ceiling roller, the video shows the whole process works from start to completion.