Baguette (profile) for fixing the film tension ceiling to the wall or ceiling, the connection of individual panels, the creation of multi-level structures.
It varies according to the destination and method of fixing polotna.Profil can be made of aluminum or PVC.Consider the features of the design and installation of various types of PVC moldings.
means of fixing suspended ceilings and views of baguette
stretched canvas can be mounted harpoon or bezgarpunnym ways (sm.Natyazhnye ceilings - characteristics and features).It is used with the various PVC Baguette for tension ceilings.
Profile for harpoon mounting
If harpoon mounting fabric is made in compliance with the exact dimensions and geometry of space (the size of 10% less for tension) (seeReferring to make payment of a stretch ceiling, and what it is).At the edge of the film in the factory welded latch on special machines - a harpoon, which will hol
When mounting the film is heated using a heat gun for greater flexibility and stretching, secured in baguette.After lowering the temperature of the web is stretched to form a perfectly flat surface.
The advantages of this method are:
- High reliability.
- possibility of the dismantling of the web and the subsequent installation without replacement.
- Reduces the ceiling installation (no need to warm the entire room, but only the film).
- higher price ceiling (you must weld the latch - harpoon factory -).
- waiting period order increases (for the same reason).
Profile for bezgarpunnogo cam mounting
This type has two curved clamp (cam), one of which serves as a spring.The film is pushed between them using a special spatula.
movable cam presses it against the stationary and prevents reverse movement.The stronger the tension of the film, the more pressing force and a better mount.
Benefits cam attachment:
- small minimum distance to the main ceiling - 8mm (important for the apartments with low ceilings).
- No need high precision in the manufacture of linen.
- cost ceiling lower than with a harpoon method .
- cams can not withstand the weight of the film large area (20 square meters).
- necessary to heat the indoor air to a high temperature (increasing installation time).
- Dismantling followed by the installation is difficult, often impossible.
Profile for bezgarpunnogo wedge fastening
When wedge fastening tape special tool (shovel) factory in the groove of baguette and then wedged wedge.Excess fabric trimmed.Bottom profile close special decorative molding.
The main advantage of this method of mounting is that the fabric can be made with a margin (no requirements for accurate cutting).
The disadvantages include:
- Heat indoor installation.
- After removing the tape mount back is not possible.
Profile for bezgarpunnogo shtapikovogo mounting
Here the role of the wedge carries a special bead.It used this type of attachment only on straight sections, so the use is limited.
Types baguette depending on the destination
for different tasks, the relevant sections:
Wall baguette - mounted on the wall and serves to secure the edges of the belt during installation.It can be of two types - visible and invisible.
Baguette PVC Ceiling - attached to the main ceiling and serves the same purpose.
Note.If the ceiling is not smooth or is mounted with a slope (not horizontal), PVC baguette ceiling does not apply.
Profile versatile - can be mounted on vertical and horizontal surfaces, and is applied at installation of multilevel structures.
profile separation - is used for joining two webs with a large floor space.
Fixing profile to walls and ceilings by means of plastic dowels and screws required length (depending on the material and strength of the base).Step attachment of about 10 cm.
Baguette pieces made of 2.5 meters, if necessary, it can be cut into pieces with the help of a pendulum saw (or otherwise) .On the ends of a profile mounting holes within 5 cm from the edge.In the corners of the room
baguette cut at a 45 degree angle and adjusted to each other.
Important!All burrs after cutting should be carefully removed as great a risk of damage during installation of PVC film tensioning the canvas.
baguette installation is not difficult to fulfill their end of the installation work rukami.Posle all gaps between the door and the wall (or two bunting) are closed decorative caps.They are made of PVC and manufactured in different colors.
production of PVC moldings for ceilings can reduce the cost of construction (compared to an aluminum profile) and simplifies the installation.
Note.No need to make cuts PVC profiles for mounting on the curved base.
PVC Baguette for tension ceilings is increasingly used because it does not stain fabric (like aluminum), easy to install and easy to clean.
- For large rooms, as well as if you want to be able to reassemble the web (after the force majeure), use the profile for fastening the harpoon.
- If the room is small and the ceilings are low, the ideal solution would be the profile of the cam (in extreme cases, the web can be replaced, the profile will remain the same).
- For small areas of complex shape stretch ceiling is appropriate to apply the wedge profile with mounting method.
- To ensure that the end result must be securely fastened to the wall a baguette (the ceiling).
- tiered design uses a combination of PVC profiles.
With proper selection and correct installation of completing elements, your suspended ceiling will last for many years without repair.