Sometimes there are difficulties with the choice of finishing the ceiling in the kitchen.Today, there are a lot of materials for processing, and sometimes people just can not choose.In this article, we decided to offer another kind of finish that can be of interest to many.
is possible to perform a ceiling for the kitchen rack.This material is not expensive, the work can be done with their own hands, thus greatly reduce the cost of installation.Moreover, this design can hide defects in the ceiling and steal apartment.
acquainted with suspended ceilings
Rack ceiling is basically one type of suspended structure.The whole area is for the production of plastic (sm.Montazh plastic panels with their hands), aluminum or steel panels.Reiki is mounted on a special suspension system, which serves the basis for the entire plane.
thickness of the elements is 0,4 - 0,7 mm with a width 50-300 mm .Dlina of up to 6 meters .You can order your size on the pane
Reiki ceiling differ in their design.Happens matte or glossy.The shape may be rounded or rectangular.
Note: When buying note characteristics of the premises.When extending the kitchen should not be placed along the plane of the elements, that you still extend the premises.It should take a wider and mounted across the ceiling.
different elements ceiling joints between rails.
- can do open joints, installation of elements between them there is a gap whose width is about 1.5 cm. In this embodiment, the installation must complete a decorative profile, which is attached to these gaps.
- When the closed interface, slats are overlapping each other.
- Another installation can be carried out without gaps.In this embodiment, the rails are mounted close to each other.
type interface directly affects the amount of material.Be sure to take this into account in the calculations.
advantages and disadvantages
For many, such a design would be a godsend.Because they can be maintained in wet conditions and does not lose appearance.
- Pinion Ceilings Kitchen resistant to high temperatures and humidity;
- can hide the flaws of the ceiling, it will be particularly important for old buildings;
- not require significant preparatory work and are easy to install.Not required meticulous alignment for mounting base;
- easy to maintain;
- durability of the structure;
- At low ceilings can be placed spotlights and high, making multi-level (see. Installation of multi-level ceilings);
- fully meet fire safety;
- There is a large variety of retail of flowers, where you can choose any color;
- Ceiling structure provides for the replacement of one element to another without dismantling the entire plane.It is very comfortable;
Rack ceiling kuhniimeet a disadvantage, takes up little space on the area of the kitchen.Although it can also increase the volume of the room.You get rid of the chandeliers, which takes the total area, and install lighting point type, which visually increase the volume of the structure.So this can be considered a minus, and not so significant.
mounting rack ceiling
If you do decide to install the rack ceiling in the kitchen, then you should know.What is the quality of the installation will depend on the correctness of the line of manufacturing design.Here there are some nuances, which we will now tell.
Tools and materials
As in any work, before you start to implement it, should be prepared to purchase the tools and materials.
- should buy the panels themselves;
- need for securing the intermediate profiles;
- Corner made of aluminum;
- support rails will be needed;
- should buy hangers made of galvanized steel;
- Punch for making holes in hard surfaces;
- level of construction;
- Scissors on metal;
- dowels and screws.
before buying the material correctly counted the amount.
- Consider the stock in a couple of centimeters on each side of each panel, it will go to the circumcision;
- Calculate the length of the panel and the ceiling.Elements of fasteners must be in the same or symmetrically arranged;
- If the room has a kitchen four corners, be sure to take another carrier rail;
Note: It's a good think over color.On sale is a large number of them.Do not forget, in the course of time, the panel will darken slightly.Keep this in mind when choosing the colors.
- Traverse this profile with serrated edge, which carries rail ceiling.Traverse is selected for each type of rail separately.Makes a purchase of items that belong to the same company.This way you can avoid the formation of cracks during the installation.
mounting rack ceiling incrementally
We now know that such a ceiling rack in the kitchen, what materials we need and prepared tools.You can now get to work.
- Do markup bottom line ceiling structure.Find the lowest corner and add to it at least five cm. This point is portable to other walls of the room.To do this, use the hydraulic level.It will accurately transfer the mark.It is sold in stores, if you have not found there, and you can do yourself.To do this, buy a rubber hose glass tubes that have pharmacies.Then insert the tube on the edges of the hose.Level ready;
- then connect all the dots.You can just fight off the line by means of a cord.It turned out we mark a line across the plane of the ceiling space.To it will subsequently be "attached" Installation of the whole structure;
- the kitchen rack ceiling mount to begin the installation guide.This is done on the perimeter of the entire plane fasteners.We measure the size, according to made a mark, and cut the profile along its length.The standard profile is three meters and cut with scissors for metal;
- The cut elements are putting under the scribed line and drilled holes drill or a hammer;
- Insert the dowel and screw is screwed.Fasteners should be carried out not less than 50 m cm between connection points.After fixing the installation, check the parallelism of the building level.On a flat line mounting profile is fixed to the joint, with corner joints, should be done desperately 45 * .
Note: Fasteners should be carried out fairly tight.Hole installation dowels perform at less than 2 mm from the base of the plant.
- ceilings rack in the kitchen attached with hangers, which now must be set.Marks the spot for the attachment of support rails.This can be done with the help of roulette.The first mark is performed at a distance of 40-cm from the wall.After about 100cm following note they should be parallel to each other.Suspensions should be fixed with dowels and screws.The holes are made using a drill or perforatora.Ih status check using a spirit level;
- now proceed to the fasteners support rails.The distance between them should not exceed one metr.Ih installing racks perpendicular.Mounting is performed on the same level with the profile that we had arrived earlier.Perform mounting tires to suspension, using a screwdriver.
Note: This step should be carried out particularly efficiently.We must form a perfectly flat surface.On this will depend the entire plane ceiling installation.
- when the distance between the fixing points are allowed to perform mount tires without suspension, but right at the base of the ceiling;
- distance between the DIN rail and angle profile must be one sm.Esli element is shorter, it should lengthen.To perform the suspension is fixed at the beginning of the next beam and the second traverse mounted back to back to the first;
- When we did the right framework for the installation, you can start assembling strips.Remove from the elements of the protective film and cut to the desired size.The length should be carried out on the basis of what elements should be less than about 0.5 cm ., Than the distance between the walls;
Attention: Before you start mounting the panels perform measurements diagonal design.If you do not perform the installation of all rods go wrong.And in the future it will be impossible to fix.Parallelism should be observed initially.
Because when fastening rails past, you will find that you have not turned the right box.Which is filled with scraps beautifully fail.Therefore, to begin to create geometrically regular basis for work.
- themselves slats gently inserted into the guide slots and snap along the entire length with latches that are on the traverse;
- So alternately inserted slats to each other.The height of the tire can be slightly adjusted.This is done by using the depth of the screw fasteners (when the base directly to the ceiling) or adjustable suspension setup / In some cases, you can use and wood lining;
- Sometimes there are questions mount last rail.It is usually not suitable width.It should be put in place and mark the mounting on both sides of the docking location.After this point it is necessary to connect these to each other and make a cut along the line.When installing the panels can be made to use wood struts, or use pieces of angular profile.
If after that you go to the kitchen and see a perfectly flat surface of the ceiling, then the suspended ceilings in the kitchen are made correctly.
If you set the pinion ceiling in the kitchen, it will have to be cleaned more often than when installed in another room.Although care and perform surface and not so difficult.Material of construction is not afraid of water, so dirt can easily wash with a sponge and a soap solution.
If the ceiling is made in the summer kitchen, where there is no permanent heating, and an aluminum material used, is the right choice.This design is not afraid of changes in temperature and humidity of the room.
In choosing the material give preference to quality, which is coated with a protective film.It will significantly reduce the susceptibility of the structure to temperature and moisture.
With proper installation of the proposed design will please owners look for many years.