Today, one of the easiest to install, and inexpensive option is to finish standing plastic panels ceiling.Full-covered surface of the panel does not require special education or great experience.Since this operation will be able to handle almost every person in detail by following all the rules of the installation of these structures.
Choosing plastic panels
Today panel made of PVC in the shop are in a surprisingly large assortment.
They are divided into:
- Wall (essentially heavy and hard)
- Ceiling (light and fragile, compared with the wall).
main rules for installation of plastic panels on the ceiling:
- Stucco plastic panels require very careful treatment, due to the fact that even the slightest pressing them assembly tool may result in seizure, respectively, exterior designIt will be spoiled.
- bathroom ceiling trim plastic panels requires the use of special water-resistant adhesive and standard fasteners, otherwise, the whole structure loses its resistance to any kind of damage.
plastic panels designed for ceiling significantly different from each other:
- color and texture
- They can mimic wood and marble , or other popular materials.
- ceiling panels are of the following types: glossy, coated with a special varnish or matte.
advantages of plastic ceiling panels:
- finishing the ceiling and walls with plastic panels has the most positive performance characteristics, their main advantage - it is an excellent moisture resistance and ease of care.For this reason, the material often used in bathrooms, steam rooms and the kitchen.
- For balconies, living room, the walls and ceiling plastic panels - a great option.And the main reason is that the material is able to perfectly decorate any room.A suspension-type structure, with plastic PVC panels can cover almost all of the shortcomings and obvious defects of the ceiling and utilities, such as cables, wiring and even pipes.
- The ceiling of this type can be built all lighting elements, including halogen lamps.
Some manufacturers of this type of panels specially emphasize their view of typesetting, thereby creating, for example, the illusion of a full skin quality wooden planks.Other construction, on the contrary, give a monolithic as well as a holistic view of ceiling coverings, n-p seamless ceiling tiles.
important enough to note the fact that the plastic panels differ in the external coating technology.
- matte panels are characterized by a complete lack of coverage, that is, they represent a panel in its purest form, with the result that the price is absolutely available.
- If the glossy surface of the panel - it shows that it it was covered with a special varnish.
- In case if the design with the presence of color or pattern, then we can conclude that it was produced using one of two technologies shown below.
technology for printing on plastic ceiling structures:
- done using a special fuser, which is transferred pattern on a flat surface.
- Figure is applied by printing with the highest resolution available on specially designed equipment that performs the most complex patterns, ornaments, sculptures, most vibrant colors.
How to decorate the plastic panels ceiling
In case if you want to repair or install a ceiling using plastic panels, youyou must know how to decorate the ceiling of plastic panels.
order to correctly answer the question "How to Lose a plastic ceiling panels?" In the first place requires the right to remove all sizes.
- To calculate the PVC panels must calculate the entire area of the ceiling for this multiply all its sides.The resulting number is divided by the area of one of the same PVC panels (shown on the packaging of the panels).By the calculations of experts advise to add twenty percent on the segment.
- To calculate the required number of mounting profile, it is important to draw a diagram of the entire ceiling with a precise calculation of the scale of its size, it needs to draw a straight line parallel along one side of the ceiling.These lines serve as markings for fastening structure, the best distance between the profiles is considered to be 60 centimeters.
- In order to calculate the profile to be followed around the perimeter of the ceiling, for this useful profile UD , and for cross planok- CD .
- making payment fasteners for mounting profile and panels, consider mounting hardware profiles, that is, 1 anchor with the expectation of one and a half uprights.
- to secure the structure to the ceiling need screws, with the presence of broad hats, always take them with a good margin of about half a meter one piece plastic panel.
- often the last stage of the headlining is itself directly install ceiling moldings made from plastic.It is necessary to purchase the perimeter of the ceiling divided into standard length of products, after which the given number rounded to a multiple of three, and in a big way.
Parts required for installing the ceiling panels with plastic
right to purchase plastic panels
purchasing PVC panel is most important is not to be mistaken with a choice of designs and buy very good quality material.
In order to make the right choice you need to follow a few rules.
- Carefully inspect the entire surface of the panel you like, pay attention to the observance of its geometry and qualitative performance of the external surfaces - must be free of irregularities, the figure should be applied evenly, without white stripes on the edges.
- have high quality PVC panels have to be smooth, with smooth, with, both visually and to the touch surface.In case you notice the transverse and longitudinal distortion, various lines and nerovnosti- purchase this design is meaningless, since it is the marriage of production.
- stiffeners that are directly within the interior cavity of plastic products, should not in any way be viewed from the outside.
- carefully calculate and compare the exact number of ribs in different kinds of PVC panels of equal width.What is more, the much stronger design to be installed.Note the thickness of fasteners than they are wider, the better the formed plastic panel.
- Then take two PVC panels and connect them with each other, the parties concerned.
- It is very important that during the docking felt the ease of collecting structures.For quality work no gaps, they are joined almost without leaving obvious traces of assembly.
- One of the most important factors to assess the qualitative performance of products is their strength as the structural and the material itself.In order to test it, you need to compress PVC panel, and then carefully examine the results of this experiment.High-grade PVC panel should not be any way to deform or crack.
- Then thoroughly believe in the potential plastic bending.In order to produce the necessary by repeatedly bend and then straighten the corners of the panel.
In the event that after three to five slow bends checked plastic remained unharmed - the panel will serve you for a long time.If, on the contrary, he began to crack or even broken - is evidence that the quality of the material is low, and its manufacturer has decided to save money by exceeding the allowed content of chalk designs.
you are very lucky if this design will not crack, the time of its installation, in any case, it does not last for a long period of time.
How to make installation of PVC panels without the help of professionals
finishing the ceiling in the kitchen with plastic panels - the most optimal solution, due to the fact that the material is not destroyed by high humidity levelsroom.It can also be placed in other rooms, because it looks quite attractive and may even become a major highlight of the interior space.
After purchasing the highest quality products, you can proceed directly to the finishing of the ceiling with plastic panels.
- First make a layout space, where it will be mounted profile (UD).Thus, it is necessary to produce a maximum horizontal plane.So for the markup, use the building level.
- Next, attach the profile itself, trying as close as possible to press it to the wall.Try to avoid the appearance of cracks.Thereafter, cross-bars, which are already attached to the ceiling, begin to attach profile The CD, which will become the basis of all PVC panels.Next
- with screws to attach the bars located along the perimeter of the structure, L-shaped plastic profile.
- At this point, carefully check the plug and you spent all communications, wires, lights and everything else.Since then it has to fix something that is almost impossible.
- Now he begins assembling PVC - panel.You must start from the wall.At the beginning of a hacksaw cut plastic panels, which should ideally be the same length of the ceiling.The first panel insert attached L-shaped profile, and secure with screws over the entire length.Further panel will need to be very hard to insert into each other, and then fasten the rails.Separately, we note that if you're not going to decorate the ceiling of the skirting, then you need to have the edge of the panels in the L-shaped bar.As a rule, the most critical moment of the entire assembly is to install at the panel.The fact that its width constantly need to be customized for all the distance to the wall.It can also insert the L-shaped bar.
- common phenomenon is the use when installing PVC panels to the ceiling bars.They replaced the metal uprights.A self-tapping screws sometimes prefer staples.Argues such substitutions easy installation.But there is such substitutions and cons.
just with prolonged use PVC ceiling panels, particularly in places where there is an increased level of humidity, the use of wooden beams can result in huge problems.Due to the fact that the tree is constantly at an increased level of humidity will bend and destroy the entire structure as a whole.
PVC - design will be able to serve a great number of years in the event that selected the highest quality material, as well as set all the rules.In that case, if you are not confident in their abilities, it is best to give this work to professionals.
In order to look more closely, to see clearly the work of installation and finishing sawn ceilings of plastic panel, review the video.About how to take care of the ceiling tile can be found in the article How to wash the ceiling tile: conventional methods.