Laminated ceiling tiles are made of ordinary foam, the correct name of polystyrene or Styrofoam.Due to the mechanization of tiles on pressavtomatah, its price is relatively low.Tiles for a variety of different cover laminating film.Additionally, tiles made with different relief structure.
Ceiling tiles depending on the production technology is divided into:
Of Laminated ceiling tiles highest quality.Laminated tiles are extruded and injection performance.The film coating of tiles has different figures.Tiles laminated by precious woods, fabrics, marble, and the like.
pressed and molded ceiling tiles can be painted different colors in its sole discretion and therefore decorate the ceiling, make a custom design.
Laminated tiles for coloring paints are not suitable.
advantages and disadvantages
ceiling laminated tiles due to its physical s
- Easily mounted on the ceiling
- Washable ordinary means
- good thermal insulator
- require minimal maintenance
- moisture resistant
- has a wide range of colors
- soft, easily scratched
- beyond repair (need replacement)
ceiling tiles are laminated with seams and seamless .Tiles with seams are 500 * 500 square and rectangular 165 mm x 1000 mm.The thickness of the tiles is from 3 to 14 mm.
ceiling tile seamless laminated made this form of relief that after installation the joints completely invisible to the human eye .These tiles have smooth edges and the correct geometric dimensions, which allows you to create the appearance of a single coating.
One kind of seamless laminated, ceiling tiles have mirror tiles .But it is made of plastic, it has a rectangular or square shape.It is usually used in small spaces where small windows.This tile expands the space and therefore popular.
laminated ceiling tile suitable for residential use baths, kitchens.
It can be glued to any surface:
- Gypsum boards
- Particle boards
Laminated tiles are widely used for decoration of ceilings in public areas: cafes, bars, restaurants, movie theaters, shopping halls, gyms, etc.
Substrate Preparation sticker tile
attention.Before gluing the tiles to the ceiling need to remove remnants of the old coating of dust.The surface must be completely smooth.Due to the fact that the thin tiles, any irregularity can ruin the whole look of the ceiling.
If necessary, the surface of the plastered, puttied, sanded, you need to wash whitewash from the ceiling.The surface must be clean, dry and free of grease.
- Before marking the ceiling, remove the geometric dimensions to the millimeter
- Make detailed project ceiling in the drawing on paper
- MoveAll centerlines ceiling
- Mark center ceiling (for this you need to hold the diagonal in the room)
- Through the center of two perpendicular lines, parallel to the opposite walls
- Pencil Stolarski
- wooden slats for lines
- knowledge of geometry for the seventh - eighth grade middle school
Before sticker tiles, should be familiar with the manufacturer's recommendations and follow them consistently.Any replacement of the recommended adhesive to the one at hand, the end result may lead to marriage.
tile glue should begin from the center, adhering to the drawing.Sticker tile is not as difficult as it seems at first glance.
tile adhesive is applied in a small amount, points on the perimeter and in the center of .This is to ensure that the tiles are well stuck to the ceiling.If necessary, move the tile from side to side in order to remove any excess glue.
attention.It is necessary to carefully control the thickness of the seams between the tiles until the glue grabbed.If a drop of glue put on the tiles to remove them immediately.
If you do not, on the surface of the tiles, you may receive an indelible stain.In this case, the tiles can be thrown in the trash.
to work with tiles need to have a small number of instruments:
- Stationery knife
- Brush glue
- rag to remove the adhesive
Laminated ceiling panels of expanded polystyrene are different fromexcept that the size of the tiles.Recall the size of the laminated panels of expanded polystyrene 165 * 1000 mm .Their properties are exactly the same and method of stickers on the ceiling as well.
addition of expanded polystyrene panels there are panels made of PVC (PVC)
These panels are mounted on a wooden or metal frame, which in turn is attached to the ceiling.Bars section 50 * 50 mm are attached to the ceiling 500 mm.To align the bars on opposite walls using the level spend two horizontal lines .
At the level of the lines are attached two wooden planks, between which is stretched cord or fishing line.This cord and bars are aligned in height.
ceilings of laminated panels
Laminated ceiling may be suspended or podshivnoy .Ceiling panels laminated films on the suspended ceiling attached to a wooden frame, filed directly to the ceiling.
on suspended ceilings laminated panels are attached to the special design of the ceiling (see: How do clearance may be plasterboard ceilings).
Here on these frames are fixed ceiling laminated panels
Laminated panels are fastened to the ceiling:
Construction of ceilings of laminated tiles or laminated panels the power of even inexperienced builders.Panel tiles resistant to most chemical detergents .
When installing a ceiling it is necessary to pay attention to the wooden slats.They should be dry.The ceiling can be combined in different colors of tiles, creating from them a variety of patterns.