One of the most difficult and time-consuming stage of repair the apartment is renovated in the bathroom.And when it comes to decorating the ceiling, many decide to make suspended ceilings to the bathroom with his hands, believing that this is one of the most affordable, practical and beautiful finishes.In this article we consider in detail the installation of the ceiling.
What rack ceiling
rack ceiling - one of the varieties of modular false ceiling structures.Suspended they are called because literally suspended from the main ceiling, creating a decorative coating, which can be placed at any communications - ducts, electrical wiring and lighting fixtures.
By design, rack ceiling consists of individual narrow aluminum panels made in such a way that they are easily mounted on the guide (traverse) without the use of fasteners, and are joined to each other.
Typically, ceiling mounting rack for the bathroom is
length of each module rack ceiling may vary, but the most common length of 3 or 4 meters.Panel width - about 10 cm .
aluminum from which made rack ceiling, is not subject to corrosion from moisture.That is why it is an ideal material for decoration of bathrooms and other rooms with high humidity.
Other advantages of the ceiling can be attributed:
- additional sound and heat insulation
- Easy device curved surfaces (thin panels can be easily bent)
- Ease of installation fixtures
- Ability to hide under the surface of the ceilingwiring and other communications.
- excellent aesthetic characteristics.
Perhaps the only drawback, which entails the installation - rack ceiling bathroom "eats" in the height of the room 5-15 cm. But for bathrooms it can be considered uncritical down.
device rack ceiling
Before you go to the store to choose a ceiling rack, measure your bathtub to the Dean and width.These dimensions you will need to determine the amount of required material and choose the best for you the length of the panels.Desirably, lacking its wall-to-wall joints without the device.
Do not forget to buy a decorative corners, which are installed along the perimeter of the room, carrying tires and suspensions.
Council.Recessed ceiling to pinion is also advisable to buy in advance, to accurately determine the size to which you want to omit the structure.
- determines the height of the ceiling of the future, taking into account the height of the reinforcement embedded fixtures, vent size, thickness, air ducts and other communications, which will remain under a decorative ceiling.
Attention!The mark must be placed no higher than 5 cm from the lowest point of the base of the ceiling!
- Set rack in the bathroom ceiling with his hands begins with marking the perimeter.It is performed with a laser, water or building level, from make a mark.
- determine the direction of the rack ceiling.Support rails will need to be set perpendicular to this direction.The distance between them should not exceed 120 cm .
- ceiling Draw two parallel lines, departing from the opposite wall at 30 cm .If the distance between them exceeds 100-120 cm , then spend even the required number of lines, maintaining between them this size.This is true for large bathrooms, whereas in conventional lavatories often missing two or three tracks.
- Similarly, mark perpendicular lines.
- All these manipulations were necessary to determine the attachment points of hangers, with the help of which the installation of suspended ceilings in the bathroom.At these points, drill holes with a diameter of 6 mm and fix hangers-clamps to the ceiling using dowels and screws.
Attention!Before installing bend spokes hung on the planned length of the indentation of the base ceiling.To avoid mistakes, pull on the chosen level along the cord.
- If you saw how to install the rack and pinion ceiling in the bathroom video, drew attention to the fact that the perimeter of the room attached decorative area.Mount it follows the layout of the perimeter, keeping the distance between the bindings 30-40 cm .The required length of the corner scissors cut the metal, after which its vertical shelf made holes 4 mm , which are transferred to the wall.The connection is performed sequentially with dowels and screws.
reference.Docking at the corners can be done at 90 degrees, but as the walls rarely converge at such a right angle, it is better to join the corners neatly in place, cutting off the corner of the horizontal shelves.
- Cut with scissors on metal rails (universal mounting rails) the desired length.On the rails have special mounting tabs.On the other side, where it is planned to start assembling the panels, these projections should not be cut off.
- Secure guides on the suspension clamp, placing them perpendicular to the direction in which is mounted rack for the bathroom ceiling - installation of the frame is now complete.
reference.In small bathrooms can do without fixing hangers, simply by installing mounting rails in decorative corners.This is possible thanks to the ease of aluminum panels that do not create a greater load on the frame.
Upon completion of the previous phase of installation difficulties with how to make the pinion ceiling in the bathroom, you will not have.You only have to carefully cut along the length of the panel and "snap" them to the mounting lug support rails.
It should adhere to the following guidelines:
- Observe the precision and accuracy when measuring and cutting boards.Use a square building to mark the cutting line.
- To fix the panel on the bracket profile, you need to click on it in the attachment point "until it clicks."
- Attach mezhreechnye insert can be in any order: as soon as the next installed panel and after installation of all panels.
- Doing rack ceiling in the bathroom with their hands, do not forget to mount directly in the panel light (see: How do better positioned lamps).To this end, using a drill-bits and nozzles required diameter drill hole in the panel and immediately set it to light.Then fix the panel on the ceiling and connect the lamp to a pre-laid electrical cable.
If you need to get around the corner and if the last panel does not fit in the width of the remaining space, it must be cut to length.Since aluminum panels are very thin, this would be not difficult.
Check the inside of the panel line crop.Attach it to a long metal ruler or builder's level and make the entire length of a deep cut with a knife.
Then take the metal scissors and make perpendicular incisions in 10-12 cm to the planned line from the trimmed portion.Then break off is simply unnecessary, and the line will cut flat and smooth, without chipping.
If you need a clearer description of how to Install rack ceiling in the bathroom - a video on the site will help you sort out the details.You will see that this work is quite possible to do it yourself and save on the services of professionals.