Conceiving device ceilings many wonder - what kind and type of construction used, a ceiling is the best?
This question can be answered as follows - the best is the one that best fits into your room and creates a dissonance with the rest of the interior.
Operating conditions - an important factor
But that's not all.Before you choose the type of ceiling coverings, it is necessary to take into account the conditions in which it will be operated.
After all, even in the same house, the internal conditions in each of the rooms are quite different.If separate bedrooms, this difference is not very noticeable, and a small difference in temperature and humidity do not play a big role, there are areas in which the differences are large, both temperature and humidity.
bathroom - moisture and temperature are important components
Take, for example, a bathroom.Normally, the difference, for example, with a small room, there is a small difference in moisture, but it
But when you use the shower or taking a bath, this difference is much higher.If the tension in the hall ceiling fabric will last for many years, then in the bathroom, he soon will become worthless.This produces a harmful mold, a negative impact on human health.
From all this it is clear that choosing a type of cover for the ceiling, it is first necessary to consider the conditions under which it will be operated only during - a second look and design.
bathroom ceiling coverings - PVC is a good choice
If we spoke about covering the bathroom ceiling, now let's talk about it.
The ceiling in the bathroom should be perfectly withstand moisture and temperature changes.So today we will focus on panels made of PVC.
Why them?Let's examine them in detail.
What is important to know about PVC panels
PVC - polyvinyl chloride, is a synthetic, universal polymer.Material formed by a chemical compound of carbon, hydrogen and chlorine.The PVC and lead are present, it is the stabilizer.
Do not be scared, lead in PVC is biologically inactive and therefore does not present a hazard to the environment and human health.
Our reference - when burning PVC lead and chlorine does not stand out.Everything else PVC panels are very poorly lit and did not support combustion.
Stipulate this only applies to high-quality PVC.
Our advice - choosing PVC panels, take it very seriously.Do not get this material in questionable places.In pursuit of the low price you can buy a combustible material, everything else releasing harmful toxins in the operation.Take care of yourself and the health of their loved ones.
PVC - the poor quality of dangerous
Unscrupulous manufacturers in the production of phthalates added to the material.This is done to give greater plasticity.
Our reference - phthalates, if it enters the human body causes lowered immunity, kidney damage, cancer or infertility.The quality of PVC, their content is minimal and poses no threat to health.Remember this!
PVC panel - advantages:
- PVC panels completely not susceptible to moisture , so they are very well suited for the bathroom.
- They can be washed with any detergent and dizenfitsiruyuschimi means.This is a great advantage of such panels.
- Another important advantage is that the PVC ceiling in the bathroom, after the installation of a panel, does not require additional treatment - plastering, painting.
- undeniable advantage of these panels is that they are very well treated, without the use of special tools.
- If you need to install in a ceiling covering, for example, spotlights, cut an opening can be with a conventional knife.
- installation pvc panels on the ceiling in the bathroom just is not big deal.
- most important thing is to arrange the right framework in which they will be attached
frame design - the right choice is important
Let's have a ceiling in the bathroom pvc hands.
You must first decide from which we make a frame.This may come as wooden sticks and metal profiles for attaching drywall.
Let's choose pieces of wood.Why is that?Yes, simply because the ceiling arrange with their help will be much easier.
Choosing panels - the most crucial moment.On health do not save
What we need to do?
- primarily required number of panels.
- To do this, measure the area of the ceiling in the bathroom and get the required amount.
important - choosing the panel, pay attention to their appearance.The surface should be smooth and uniform.If there are differences of color or inclusions present unknown, give up the purchase.
Once you have chosen the panel, ask the seller to provide a certificate for these products.If the certificate is missing or "is there, but is now closed in the safe, and the head of the key and there he" also refuse to purchase.Health is more expensive.
PVC ceiling - necessary materials:
- In any case, take a couple of panels in reserve.
- price is not high, it is also the advantage of PVC panels, and in case of breakdown or improper undercut you will always have at hand panel.
- Bruce appropriate section.Suitable 50x50 mm or 40H50mm .Look at the size of your bathroom.
- If the bathroom large and there is a possibility of deflection structure in the central part of its own weight, get the required number of suspensions used in the device frame plasterboard ceiling.
Our reference - usually the bathrooms are small, it concerns a typical Soviet-era plan.PVC panels are relatively light weight and suspensions, are usually not required.Given the size of the bathroom.
Of the tools we need:
- Building level
- Paint knife
- staple gun
- screwdriver under the existing screws and screws anchors
- Water or laser level
Getting Started - marking
can start the installation.
- First, you need to find the lowest point of the ceiling.
- is done using water or a laser level.
- From the lowest point of retreating down the wall by 50 mm and make a mark on the wall.
Our reference - if you use a larger cross-section bars, padding must be greater.In any case, the outcome of section bars.They must be fixed to the wall so that the top of the bar touched the lowest point of the ceiling and the lower edge is at the level of alignment line drawn around the perimeter of the wall.
- Based make a mark, draw a wall around the perimeter of the line with a marker and building level.
- If you follow the correct layout, the beginning and end of the line should match.
PVC ceiling - Cooking timber for installation
- on the bar, to be mounted on the wall, Mr. Anes marking - 1;2;3 ;etc.in accordance with their location from the start of installation.
- Drill the required number of each bar mounting holes anchors.
- Applying sticks to the wall of the line according to the markings on the wall mark the locations for anchors.
- Drill holes for anchors.
- can mount bars, they are labeled and it does not take much.
- The next thing to do is to fix the transverse bars, on which are mounted panels.
- Simply you need to measure the width of the existing panels and secure the cross bars with the required step.
- docking seam panels must accurately account for the middle of the cross-bar.
wooden frame - the moisture, the main danger
Sometimes, when installed on the ceiling panel pvc bathroom with a wooden frame, the installation of the cross-beam is made simultaneously with the installation of the panel.
- Such a method can be used when the frame is used as a metal profile.
- metal profile made with obligatory coating, preventing its corrosion from moisture.
- Bathroom is the case when the moisture and corrosion coexist side by side.
course, pieces of wood are not subject to rust, but from the moisture they begin to rot.From this room there is an unpleasant smell of mold and this design does not last a long time.
wooden frame - mandatory treatment
can handle the wood before installation of special protective equipment.But during the installation is done trimming and drilling of beams, so these places are not treated.
So the most correct decision becomes, when wooden construction frame is processed after mounting.
Our advice - if the upper part of the timber tightly to the ceiling, it should be treated prior to installation.Otherwise, after installation, you will not be able to process the upper portion and the moisture relatively quickly penetrate into the existing gap between the beam and the ceiling and your design is doomed.
treatment option for wood
in DIY stores selling a wide variety of treatments for wood.
- If you are not an expert in this area, consult with the seller - consultant what treatment you should purchase.
- in serious, high-quality product you will certainly help with the selection of the required funds.
- Another plus serious trade from incompetent sellers, putting on his own, of unknown origin goods, low prices.
Our advice - if you are in doubt about the choice of processing means, take an ordinary varnish.
Woodworking - old, but a sure way to
Woodworking moisture varnish as follows:
- Linseed oil must be heated.
- Warming should not be on an open fire, and a water bath.
bath - not a simple
Who does not know what the water bath, ask the female half of your home.Many women use this method in cooking.
- Simply put, in the capacity of a larger installed capacity is less.
- Here at the bottom of the container should not come into contact with the bottom of a large.
- In most filled with water, to such an extent that it does not touch the bottom of the lower capacity.
- linseed oil is poured into a smaller and everything is set on fire.
- Thus, linseed oil is heated not open fire, and the temperature of hot water in a large container.
Drying - how to handle
Linseed oil is heated, you can start processing
- tree covered with hot linseed oil with a brush.
- surface after the treatment must be warmed to a temperature of 180 - 200 ° C.
- This can be done by an industrial dryer.
- procedure should be repeated as long as the linseed oil is no longer absorbed into the wood.
complexity of treatment - an excellent result
Of course it's a little complicated way, but we are responsible assure you, after this treatment, pieces of wood will be completely impervious to moisture and will last you for many years without replacement.
You may from time to time to change the PVC coating, wanting to renovate the interior, the bars will serve you in the future.
PVC panels - do not forget about the light:
- Before installing the panels, take care of the lamps.
- It all depends on the type and the type of coverage you choose.
- In any case, print and fasten the wiring in the right places.
- After installing the panels in place it will not be very convenient.
Installing panels - "Shooting»
It remains only to establish the panel.
- This is where the advantage of the impact of wooden beams, fasten panels to it, you can just shoot them with a staple gun.Quickly and conveniently.
way to much - the main thing to choose the right.
You can of course, and on the other to arrange the ceiling in the bathroom of PVC panels - videos to help you.
We repeat that the method described above to arrange a ceiling in the bathroom PVC own hands is one of the many existing variants.
For someone - it seems much easier to establish a framework of metal profiles.There are embodiments where the panels are fixed to existing PVC ceiling with adhesive without the frame.
We know how
all in the hands of the one who performs the work.Our task is to help the people in the choice of a way of the device of a design as easily as possible, and most importantly, that it was safe.
always happy to help you on the pages of our site.