elegant satin appearance attracts more and more buyers.This material is used both for domestic furnishing and for building social type.
Stretch satin ceiling has the original topography and emits light shine.Video and photos of this material can be found in the internet.
instructions for installation will be given nizhe.Davayte define the advantages of this design.
Benefits satin ceiling
Before you make a choice, you should understand the types of suspended ceilings, and only then decide which design to choose (sm.Vidy stretch ceiling: what to choose).
- satin stretch ceiling will suit perfectly to all types of facilities;
- material price attractive enough;
- change color in different light, it will be quite original.Daylight does not change color, but when the light changes occur on the angle of view on the surface.
Especially this type of coating stands out when you make a "starry sky" (sm.Natyazhnoy ceiling "starry sky": materials and technology work);
- Gives elegant layered structure;
- White satin stretch ceiling with a slight sheen gives the impression of flowing fabric, with a slight effect of mother of pearl;
- This waterproof material.Satin Stretch ceilings do not miss the water.
on the surface is not going to condensation and thus they can be installed in the bathroom and the swimming pool;
- Material satin ceilings of it quite strong and can withstand a load of about 100 liters per square meter;
- hygienic and eco-friendly material, no harm to human health.Throughout the period of operation no harmful substances, does not allow to accumulate dust and imbues different smells, it allows the use of such a structure in the nurseries;
- Easy maintenance, they do not require special care. is enough to make regular wet cleaning, but this should be done without the use of abrasive cleaners;
- satin stretch ceiling does not fade and does not yellow over the operation.It is possible to coating the surface of all possible images;
- satin stretch ceiling is resistant to high temperatures and can be operated at temperatures up to + 60 *.This refractory material is exposed to combustion yen.
white satin stretch ceiling can often be seen in the decoration of the hall or public premises.
But the material has its drawbacks:
- This design can be made with their own hands, but there is one obstacle, special equipment is required, a gas gun (gun sm.Gazovye for ceilings: the device, the principle of operation, safety).And it certainly is a lack of material;
- This ceiling must not be operated at temperatures below 0 *.Therefore this limits the use of this material;
- small thickness PVC, only 0,2 mm .This fabric can be easily damaged with a sharp object.
Installation satin stretch ceiling
Installation of a stretch ceiling film, not a difficult question.But it requires certain skills.
However, if you have a small room and you want to learn how to do it, then you can try
Like any work, installation of the ceiling starts with the preparation of the necessary tools:
- screwdriver and hammer;
- Hydraulic level and tape measure;
- Hairdryer building or heat gun;
- film stretch ceiling and profiles.
Such a tool found in most households.It may not be just a hair dryer, you can buy it at retail.
and hydraulic levels, which can be done by yourself.
For this purchase a rubber hose with a diameter up to 10 mm.Two glass tubes which are in any drugstore.Insert the tubes in both ends of the hose and the level ready.
before installation to determine the method of installation.They have several types.
Shtapikovy and wedge method
should say at once that these methods do not require prior preparation and their webs can be performed independently.Only those methods are more time-consuming.
But there is one significant plus, they do not require the use of special equipment that not everyone is available.
- This is done with the help of wedges or glazing beads.In this embodiment, the web is not calculated for the earlier and trimmed during mounting.
Installation may be formed wrinkles creases that occur during the warm-up is not the right material and uniform tension.
Therefore, this work should be done fairly meticulously;
- Such fastening material firmly secures the film. Therefore, further work (repair of pipes, draining, etc.) in this situation is rather difficult question.Doing
dismantling only have to beat wedges and put them on a former mesto.Pri that it will have to do without breaking the tension across the ceiling, and it's pretty hard to do;
- The advantage of such an installation can be called low cost operations.
Unlike the previous method, in Harpoon to start should definitely mark the material.Then welded around the perimeter of the ceiling mount, it is called a harpoon.
With this method, you can always detach the film.
- exact pattern coating is done by a computer program.This provides a sufficiently tight fit the material and prevents the formation of creases and irregularities;
- With this method of mounting is better to use aluminum profiles, which will disconnect the cover at the right time.When using a plastic version, the probability of its destruction in the joints with a harpoon.
- This setup allows for a service covering himself and not to resort to outside help.
After buying the film coating and preparation tools you can begin to work itself.
Warning: Do not forget that the film coating should be put in the room for at least one day prior to the installation.It has to get used to the room.
material should not be to throw, and it is necessary to accurately put, without excesses, that it does not normally caked and cracked.
- profile and is plastic and aluminum.The second option is more expensive, but also reliable.
This durable design.Therefore, if you want to do quality work and beautiful, with long, then take aluminum construction;
- for fixing the film coating is applied harpoon shtapikovy and wedge fastening methods.The first is the most practical and reliable.
When it around the perimeter of the film on the special adaptation of the welded hook film, the film is applied is the same as that for the ceiling.Thereafter, the hook is fastened to the profile, after which the film web is stretched;
- To use harpoon method should ideally make a layout of the web.The size of the film is less on 7%, of the total material.When
wedge fastening method, the film itself should do a little more of the total volume of the material;
After selecting the desired profile of doing layout premises:
- find the lowest level of the ceiling.Put a mark on the wall.
Thereafter, it should be transferred to the other plane.To do this, use the hydraulic level
It will most definitely make a layout.After the transfer of the right size combine all the points.
For this use nylon thread.Slugger line fixing the ceiling around the perimeter of the premises;
Warning: Do the layout very carefully.If not done correctly, the construction work of the entire plane will be placed is not correct.And fix it probably will not be possible.
- We have a line of fixing the ceiling.Where you want to attach the ceiling profile.
For this cut the profile to the desired size.Make a hole in the wall with the gun and fixed elements.Points of fasteners should be in every 15 cm be ;
- look to mount on the edge There are no projections. Screws secured with obnizheniem to not act hat.
This should be done qualitatively, to avoid damage to the film.
now should not make the wiring lamps:
- Making marking points of the installation of lighting devices (sm.Lyustry for ceilings: the selection and application);
- determined by the point of connection to the wiring and set the junction box;
- Make channels to locations fixtures;
- connect the cable to the junction box and fasten them to the ceiling.It should be put into a special wire corrugation.Who will protect the wiring;
Warning: Avoid doing stranding in the manufacture of wiring.Prefer terminal blocks, which will provide the connection.When
damaging the wire, it will be necessary to remove the ceiling, and it is quite difficult.So do the wiring thoroughly.
- Connect lighting equipment and check the work of the lighting system.Make sure it is.
After installing the web will make it harder;
- check and verify the correctness of the connection of luminaires.Turning off the power line installation.
After installing the profile and lighting, you can begin to mount the film.
To do this you must first warm up the room 40-degrees .To do this, use a heat gun.If not, use the heater.So
- start unwinding the film, but in no case should not be kept near a heat gun or other heater;
- makes attaching one corner according to the markings made.In this heat the film to 60-65-year-degree .
For this purpose heat gun or hair dryer building;
- then performs mounting angle, which is located diagonally.Thereafter, the mount other diagonal;
- During connections make marks on the canvas for the installation of lighting fixtures. then performs pasting circuit cut plastic material.
Making cutting the contour.Plastic material do not give a break below a certain place;
- When harpoon mounting system, a spatula should be to drive a harpoon into the groove, which is in the profile.Do it until it clicks into the material.
When the attachment should not forget to heat the material to the required temperature ;;
- In other embodiments, the fastening connection is performed using bead or wedge.The film is dressed with a spatula.
Once the attachment is not the right material to be cut;
- After full cooling of space and material, the film perfectly stretched.
Warning: Do not insert the film separate sites.Begin to introduce it gradually, from seasoned.If you do it section by section, on the material will wrinkle.
We have established a fairly good coverage.But we should not forget that it can not be used in unheated rooms.
Catinovye ceilings or glossy or matt, can decorate any room and deliver labor to maintain.But it is possible in a particular installation.