Ceilings on its popularity in today's superior repair drywall construction.Mounting tension coating is made much faster, also does not require finishing work leaves no debris, and most importantly, it is the external aesthetics.
Very popular in modern construction works are multi-level ceilings, which require the installation of stretch ceiling in plasterboard.
Methods of fastening of stretch fabrics
Before starting the installation, you must determine the level of the ceiling. Smallest recommended distance from the base of the ceiling plane to plummet is 35mm.
before installation is necessary to provide the length of the luminaire cap to the result you have to add 15 mm to connect lighting.
Before you attach the suspended ceiling in plasterboard, consider installation methods to determine the optimum design option:
- harpoon method (or French);
- bezgarpunny method of attachment (or Dutch);
- cam way to stretch products.
harpoon method for suspended ceilings
Let's look at the principles and the details of such a facility:
- This mounting variant provides accurate measurements of the ceiling plane.It is necessary to repeat all the contour lines of the ceiling plane to the perimeter web could be welded retainer (harpoon).
so-called fixed bracket is welded in special factory conditions.Therefore, the size of a stretch ceiling must be calculated precisely (see: How do make the calculation of a stretch ceiling, and what it is) and be less than 7% of the tension state.
- alleged accuracy rate of 1%.Welding harpoon bars equates to date of manufacture of stretch ceiling.
- Before you attach the suspended ceiling to drywall, installing plasterboard frame, then his figure mounted aluminum (or rigid plastic) mounting bracket.In this bar and inserted into one end of the fabric, and then the material is heated to 70 degrees (heat gun), and inserted into the opposite part of the vinyl fabric with a spatula.
in the same order all the fabric is mounted on the perimeter.After the web is completely determined by means of the harpoon strip web into latched and locked.
- irregularities on the gravity material disappear immediately after heating , soon takes the web at room temperature.After all the procedures installed baguette fastening profile.
decorative element to hide the entire mounting system.If you want to make a stretch ceiling mount to the wall of plasterboard, then the bar is attached to the metal profile, which is installed drywall.
Tip: There are times when it is impossible to determine where the user's profile and the mounting bracket is mounted directly on the GCR.To tighten the screws, it is recommended to use a moth plasterboard.
Dutch installation, or the method of attachment bezgarpunny
This option works mounting allows to simplify the installation of suspended ceilings and much easier predyduschego.Krepleniya not soldered to the ceiling, hence the need to send materialthe plant disappears.
One end of the leaf is inserted into the mounting bar is fixed and the other strap.The fixing member and a decorative insert and spacer together.This method resembles the device for embroidery.
Bezgarpunny method allows you to work with your own hands.After a simple installation remaining ends that stick out of a decorative strip can be cut with a knife construction.
This method is most applicable when the braces are made ceilings and the degree of tension adjustment is necessary material.
web cam fasteners
name is derived from the method of attachment of the mounting panel, which consists of cams and one spring.Vinyl material with a spatula to be pushed between the jaws, one (upper) is pushed.
Once the tool is pulled, the top cam accepts their previous positions.When the fabric is stretched, the movable part is pressed strongly to the stationary member and fixes the stretched canvas.
height of the fixing profile is small, so you can save a useful area. This method allows for the installation of the ceiling at a distance of 8 mm.from the base.
In addition, the method of suspended ceilings often used in multi-tiered ornamental designs.Is it possible to attach the suspended ceiling in plasterboard with this method?
Of course you can, as this device can be inserted into small islands stretched canvas, stretching between the various figures of GLA.After reviewing the method of attachment of the vinyl material, consider what instruction is used to attach the web to the vinyl drywall.
must now decide on the material and choose the method of fixing.In every work has its own rules and features to be followed.
Mounting frame for plasterboard structures
To make mounting to drywall suspended ceilings, you can make all your own work associated with installation frame and cladding material it putty and paint.Originally performed frame for the ceiling of the metal profiles, which are needed for the cross section of stretch fabrics and gypsum material.
First level is set GCR mounting frame.It provides two values, one of which is the width of the mounting profile or depth of the tension of the web.The second value applies to the apparent depth of the level of drywall, iedistance from the lower level of the GCR to mirror the tension plummet.
Summing both quantities we get the total distance from the base to the ceiling suspension.
This figure should be measured from the ceiling down and put a mark in the corner of the wall:
- With water level tags are placed on the corners of the room (2 labels on the walls of the conjugate).
- With Tie Label choklayna, fighting off the control line at the planned locations around the perimeter of the room.
- further defines the place and the amount allotted stretched canvas, and the drawing is drawn as an outline on the base ceiling.In other words, make a sketch of a design will look like the future construction.
Tip: Before you begin the laborious process of its own, it is recommended to view an instructional video.
Then, draw the outline of the metal profile attached to the base UD ceiling.Pre profile is cut every 50 mm.with sides and is mounted to the contour line, strictly according to the drawing.
profile also installed in those places on the wall where the plaster will konstruktsiya.Na next step is stretched monofilament thread for the future of the ceiling drywall, fixing it on the screws, which are screwed into the wall UD-profile.
Next, installation of suspended ceilings in the drywall provides installation CD Profile horizontally on suspenders.The parking
- Profile invest in the guide bar, so to get to the virtual bending, which was carried out earlier in the suspensions.Profile aligned with the thread.
Then cut off one guiding profile and put on CD-edged profile ends.Then connect the two clipped UD profile vertical (top and bottom).
can then attach drywall.Below is a sample photo is recorded on the CD suspension.
important to know that before you attach the FCL, do the wiring of electrical wires for lighting and communications, hiding all the wires in the corrugated cable, carefully attach it to theceiling.Wires are displayed to the stretched canvas.
drywall on the ceiling frame construction
for installation work GCR at the ceiling, you will need several people.Otherwise, there is a good chance to break the material, when picked up and screwing, especially without experience.So
- screws, 2.5 cm long metal twisted with a pitch 40 cm. Approximately one sheet takes about 60 screws.Screw heads must be vtopit into the material, but not so hard as to form a crack.
- Vertical GCR mounted not undercut the figure.This operation is carried out at the place of a hacksaw after screwing.
- small vertical strips cut the required size and screwed to the metal frame with screws.If there are fine bending, the sheet is cut with a convex side.
Tip: When the twist screws, recommended using a special attachment to gypsum boards.Thus, the depth of the screw is fixed, and the paper is not torn.
drywall finishing and mounting tension ceiling
on the outer corners of the whole structure are bolted angles to determine the definition of the angle of putty.Then the material is primed.A few hours later (after drying), you can start plastering and painting works (see: How do painted plasterboard - doing the right thing).
selecting one of the above methods to install a stretch ceiling plasterboard can get to work.Installation of vinyl ceiling is made on the same principle as an additional layer of multi-brand ceiling.