Still came the day when the term "renovation" was widely distributed in our country.Now under the "European style" refers to the most ordinary repairs, after which the apartment becomes fresh, smooth corners, and the ink is not smeared.
A lot of time has passed since then, and more recently straight walls in the apartment are the norm.Of course, not only the walls, not only floors, but the ceilings are almost totally sheathed plasterboard.
Open plane any premises attracted the attention of the observer.But when it comes to the walls, then no matter how well were arranged partitions, any irregularities and marriage can be hidden using drapes or decorating.
can always hang on the wall any painting or mural, but this trick will not work with potolkom.V during the day light falls on the ceiling at different angles, and even the smallest irregularities sometimes seem hideous scars on the face of the interior.
To prevent cracking, level difference is at the junction of
One of the most common - drywall.For information on how to sheathe plasterboard ceiling will be described hereinafter.
Like all the work required to do this in stages.The most important thing in this matter and take the time to do accurately enough.
Preparation and frame
Before installing the need to consider all communications, which can prevent the device ceiling, as well as all the utilities that need to be hidden.It's not so little as it seems.
- heating pipes;
- wiring, including going directly to the ceiling lights;
- aerial cables;
- leased line Internet;
- alarm, including fire-fighting system;
- telephone lines and other low-voltage systems.
Tip!All this must first disable, hide, remove, cut.Pipes can not cut well.But
framework needs to be done, given that the construction at the site of the obstacles will be weakened - that is, to arrange additional support for the FCL.
frame under GCR
After taking into account all the communication, proceed to the assembly of the frame to the ceiling (sm.Karkas ceiling plasterboard - all the little things or little things do not happen.).
If there is too much trouble, then you can start:
- The first step is to determine the size.The standard format of a single sheet of drywall - 1.2 meters x 2.5 meters.Do not think that just screwing sheet of drywall to the existing ceiling, you can celebrate the housewarming.
Focusing on the paper size, you need to make a layout on the ceiling - which will be mounted rails (profile).
- first line guide is mounted close to the long side of the ceiling. be sent must be positioned relative to the first is absolutely parallel, at a distance of 60 centimeters from the previous one.
This arrangement will give a profile of the structure rigidity.We must strive to ensure that the format of the cell was close to the size of a square with sides 60 centimeters - so it will be easier to install on sheets of drywall.
Important!Here we consider the design of the frame without suspensions, directly on the supporting ceiling.If you want to lower the ceiling surface, then the guides will need to lower the suspension.
In our example, the gap between the GCR and the base of the ceiling is not more than 5 cm.
In the case of the last profile, bolted to the ceiling, to the last wall is a short distance, the framework still need to "wrap around".The entire perimeter of the apartment must be lined with a profile, how to sheathe plasterboard ceiling - this is the second issue which will be discussed below.
After the frame is installed on the ceiling, you are ready to drywall.Pre-need to prepare for the mounting screws.
still need serpyanka, screwdriver.Using a screwdriver, you can priladit plates to the ceiling, but this action will take a lot of strength and patience - in our time we need to use modern technology.
It should be noted that the profile is not pressed right up to the ceiling - is the level of the lower edge of the guide or regulated construction suspension.For information on how to sheathe plasterboard ceiling video and photographic material on the Internet more than enough, but no theory is no substitute for real, "combat" practices.
- Attach sheets of plaster to the profile must also be in a certain sequence.One sheet edges somewhat thinner than the rest.Not for nothing.
One side of the sheet is compressed at the factory, so that when joining sheets could stick serpyanku - a material that prevents the ingress of debris into the slot and allows to protect the seam from the cracks that may appear over time.
- sheets are screwed to the profile with a minimum clearance between the blades and then glued serpyanka.Further, the site of attachment of the sheet to the profile and joints with serpyanka shpatljujut, and the base is prepared to equalize.
When cleaning cloth from contamination need to pay attention to the paper coatings - if the damage, the primer may be difficult to go under the filler and as a result - the ceiling osypletsya these bad places.
details and warnings
Drywall - a very interesting material, from which you can make a real work of art, but it is not suitable to hold the ceiling inbathroom, for example.After all, how to sheathe plasterboard ceiling in the bathroom, no one, perhaps, can not really tell.
too high humidity level is having a devastating effect in relation to this material. Therefore, we must clearly understand the task before it is executed.
After the entire plane ceiling plaster has already been closed, and the joints and mounting holes putty, you can begin the installation of ceiling moldings or baseboards.
Important!Between them there is a fundamental difference - the plinth mounted to the wall, and baguettes stick to the two planes - the wall and the ceiling.The device baguettes - this is not the final stage unit of the ceiling, but one of the final.
It craftsmen who had their hands are not engaged in repair, it is better visually "spy" how to sheathe plasterboard ceiling from experienced builders.
uncomplicated Such actions can turn an old, cracked the ceiling in a blank canvas to work creatively - on a perfectly flat surface, you can create any image, play lighting priborami.Posle how to get the ceilingsheathe plasterboard at least once, it will not be difficult to carry out similar work in other areas.
main thing - to understand the technology and gain experience.This simple guide will help save on repairs, and the price for this kind of work can reach several tens of thousands, so that knowledge - force!