products on the market today there are a large number of suspended ceilings.As a rule, they all have a special coating.This protection prevents mold, microbial growth, even a coating of dust settling.
Normal ceilings are less protected from environmental influences.However, in life anything can happen.
Failed opening champagne or ketchup packet may lead to contamination of ceiling covering.And any kind of smoke can lead to trouble.And there are questions to address the problem.In this article we will try to help deal with this issue.
first place probably is the question, how to clean the ceiling of the whitewash.This is a serious issue faced by the average person during the repair.No qualitative stripping will not allow properly treat the surface, the result is not high quality processing is completed.
now describe how to wash the ceiling chalk.
And it's pretty easy if you know how to do it.
- First, determine the type of whitewash.Which can be made with chalk or lime.Running a hand over the surface of the ceiling.If the hand is white, then it's chalk and whitewash made with this material.If the hand is clean, you should drop the ceiling of the water and if the water remains on the surface of the ceiling, so the work was done using lime;
Next you need as far as possible from the clean room furniture.If not, you will have to cover anything.It's a pretty dirty job and things can suffer.
There are two types of withdrawal whitewash: dry and wet.Wet less dusty.
- Wet warm water of the surface (which is a part, do not handle all the whitewash quickly absorbs moisture).You can use a sponge, paint roller or spray gun.
- We wait for a while until whitewashing pick up moisture.If once a little, apply water a second time.It is better to open the window and make a draft, it will help whitewashing gain moisture and she starts slowly to keep up with the base of the ceiling;
- After chalk scored moisture, take a trowel with a width of 10-15 cm, is pressed against the ceiling and cut off a layer of whitewash;
- After this work, the chalk can stay in the shells of the ceiling.Therefore, it must be removed with a damp sponge.Wetting it with warm water and we clean the remnants.
How to wash the chalk from the ceiling we told.You want to ask how to wash mortar from the ceiling, is performed by the same method as the removal of whitewash .Let us turn to other types of pollution.
further explain how to wash away water-based paint from the ceiling.This material is often used in the finishing of surfaces in living rooms and offices.Made of water-based and odorless, does not harm human health.
Pretty staunchly resists moisture, so it is difficult to remove.But if you want it can be done, it should only have patience and the right tools.
- should take a ladder or stool.The water tank, construction roller and trowel.Rinse with a paint can with a roller with a long handle;
- wets the surface of the ceiling with a roller and warm water (preferable to use a fluffy cushion).In the water you can add a little food, it will accelerate the carrying out of work.Poured the contents of one bottle of iodine on a bucket of water.Coverage will nourish moisture;
- When painting the ceiling is not soaked with water and pushes it, it can not try to soak.This means that the surface is treated with waterproof inks and wash it does not turn;
- If you're lucky, and the ceiling is treated ordinary paint, it will pick up water and raskisnet.Then you should open all the windows and arrange draft.Painting and bulges to nabryaknet.This field should be armed with a spatula with a long handle and remove impregnated coating.This must be done quite easily.Remove the paint to the base of the ceiling;
In some places, the paint can not keep up with the ceiling surface.For these purposes, a special solution to be cooked.
Mix chalk, asbestos, caustic soda and fill these components with warm water.We would like to state the tomato paste and applied to the places where the paint can not be removed.
a short while, remove it mechanically, using a spatula.Such work should be carried out quickly, eventually the paint will be removed just awful.Do not apply the paste is not a large area at once.
- For Plasterboard cleaning process is done in the same way.You can even use a hairdryer to remove coatings of this type.At work, be sure to use a respirator that will protect against dirt and dust.Do not allow to penetrate the pores of the waterproof paint into the body.
Spatula may just skim the surface of the coating.Then it is necessary to take a hammer and knock on the ceiling.A coat of paint will be disturbed and it is much easier to remove.
- In the process, may fall off of the plaster.To avoid this you should use any putty mixture.Before its application, the surface should be given time to dry completely.Following the work can be treated with primer and ceiling paint in a new color.
is possible to resort to the help of special funds, which are in retail.In most cases, they simply must be applied to the surface and in thirty minutes, rinse with a damp cloth.
If the paint is old, it is worth trying to remove it with an ordinary newspaper:
- should be pasted on the ceiling of little old newspaper.Allow to dry completely, then safely remove the newspaper.The remains of the paint just peeled off the ceiling with paper.
- tell us how to wash off the paint from the ceiling acrylic.For this to work it is necessary to prepare a solution of the following components: water, quicklime 1.5 kg .and patosh - 0.5 kg..This composition should stir and bring to a density of sour cream.Then we cover the surface of the ceiling and leave for 12 hours be .Then remove the mixture together with the paint with a spatula.If at one time will not work qualitatively clear, try again for the second time.
Wash off adhesive ceiling
At one time, many pasted wallpaper on the ceiling.There were few materials for finishing.Or in the bathroom it is sometimes necessary to remove tile glue from the ceiling.
This question can always occur in any person.We will try to help to resolve this issue.
To begin to prepare the necessary tools:
- Take the ladder size.We need: a chisel, grinding machine, a Bulgarian, a putty knife, sandpaper, goggles and a dust mask, gloves, putty, primer.
- We will work quite dusty, so it is open all the windows, wear a dust mask and goggles.With grinders and special circle with sandpaper, remove the adhesive from the ceiling;
- To reduce dust during operation, it is necessary to moisten the surface to be treated a little clean water.Be sure to use waterproof sandpaper.It will save you money.After contamination should be cleaned with sandpaper under running water and continue to work;
- We use handy tools: putty knife and wire brush.Clean out the glue, it is a difficult task.If it is small, it can be several times to moisten before he raskisnet.But it is not always possible, it all depends on the composition of the material.It is difficult to do this work not roofing because the glue, but because of the inconvenience of work.Use a long-handled spatula, it's a little easier workflow.
- in hard to reach places, use a chisel.So you can clean the ceiling and begin further work.
- After cleaning the ceiling need otshpaklevat (if you plan to clean finish).If using tiles, while smaller shells are irrelevant.It can be primed once and attempting to install the tiles.
Get rid of annoying smoke
soot can be formed in the flat because of the fire, and for other reasons it is possible.No one is immune.Only then is the set of tracks that should be removed.Now you will learn how to clean soot from the ceiling.
should be remembered that it is time-consuming work.Smoke damage not only whitewash, it also eats into the base of the ceiling.So there will have to work.
- first step is to take a ladder and using a damp sponge to remove the dark patina.Do not try to wipe it dry.It is also complicate the situation;
- Spending removing whitewash with a spatula, as described earlier;
- solution is prepared.That will help us to remove the remnants of soot, they pass through the VEDA whitewash and at the base of the structure.Take normal "Coke» 600ml,.detergent such as « Mr. Muscle" - 100g ., water - 4 liters , two sponges and a stiff brush.Mix;
- wetting the ceiling made solution.We are waiting for 15 minutes.Wipes his lips with the help of a second.In the process of rubbing, the sponge should be thoroughly washed under running water.The more - the better.
How to wash the ceiling we understand.But some have also suspended ceiling.Sometimes such a structure is required to wash.Over time, it may appear and spray champagne and juice.
- The first step is to prepare the desired solution.Take a mild detergent (suitable both detergent or liquid soap).Soluble in water .;
- Take a soft sponge or cloth, Macao and washed with a solution.Launderers without pressure on the ceiling.Do not use force.It will benefit only patience;
- Wash suspended ceiling and clean with a damp cloth;
- to return former luster designs, treat the surface with ammonia ten percent.We wait and be sure to wipe dry with a soft cloth.If ammonia does not help, you can use window cleaner.
Note: Any contamination of the ceiling, do not use abrasives, scrubbing and knives.Do not use for acetone and other solvents
- Wash suspended ceiling PVC film is also possible.Apply the solution to that described earlier.In this type of ceiling laundered without pollution problems.Only one film may be damaged by a careless movement.Do not attempt to work hard tool.
a vacuum cleaner before cleaning undesirable .You can just tighten the film does not calculate the power of a vacuum cleaner.Do not experiment.
Before you start, assess their strength and scope of work.Several hours of work standing on a ladder with his head and his hands up, not such an easy task.Take into consideration your health.
Often, such work should be carried out in stages, in a few days.In this matter, the main thing is not to hurry, there can only win patience.