Currently, mirror on the ceiling is not a very popular decision.The reason for this probably lies in the courage and expensive - solution is not standard.
However, when properly performed such an option will look amazing.
Where appropriate mirrored ceiling
Designers are advised to install a mirror on the ceiling in the "low" areas , as they are able to visually lift the plane off the floor.This increase and the space that will seem wider and freer.
Currently, in order to create a mirrored ceiling, do not need to make little or no effort, as manufacturers have come up with special tiles intended for this.One side of a tile is a relief for the clutch, and the second - mirror.
This material practically does not deteriorate as it does not absorb moisture, so it would be perfect for the bathroom.The presence of the mirror in the bathroom
course, mirrors on the ceiling and can be installed in the living room.It will make its grand and spacious.
This option is perfect for those who want to emphasize their status.However, it is worth noting the fact that the living must be special, is used for various celebrations.
this option is acceptable, and in the bedroom.The mirrors will create a feeling of spaciousness and airiness.
But in this case there are also nuances, because the plane may not be a multiple of the width of the tiles, and then they have to be cut, it is very difficult in the absence of special skills, so a job best left to the master with experience and proper equipment.Of course, the cost will be higher, but the design will look more presentable.
Tip!It should be noted that the mirror construction - very heavy, so the tiles must be glued on a solid foundation, and therefore, it is necessary to thoroughly clean the surface of the base of the old materials.It is advisable to get to the floors or concrete slabs.
How to make a mirrored ceiling
For safety and ceiling give additional strength recommended to put on a special impregnation, which penetrate deeply into the structure of concrete and reinforcing it.In addition, the treatment will remove the dust collected on the surface, linking it, so on the basis of a well-pasted anything, including a mirror.In
if rough surface is uneven, it is desirable to pre-align.To align, you can use sheets of drywall (plasterboard ceiling sm.Vyravnivanie - how to make yourself), chipboard or plywood.
In this case, the mirror on the ceiling lies just idealno.Chto As for mounting, it is carried out by means of any adhesive suitable for mirrors.
is better not to risk it and do not buy tile adhesive or cement, so it does not end well, so better to just follow the advice izgotovitelya.Kley be diluted, following the instructions on the package.
desirable to apply it with a spatula with teeth on a working surface, and on the tile, then press firmly around the perimeter.
Tip: To make the mounting of mirrors even more reliable, you can resort to the screws, screws or small dowels.But their use is necessary to pre-test their abilities in the drilling tile, and then ream the foundation and ceiling tiles.
Only then you can begin to mount, but a self-tapping screws, or it is necessary to put a pad of rubber as an obstacle to damage the mirror.
However, the installation of mirrored ceilings in the same way as the installation of any suspended ceiling sistemy.No existing reservations: design, which will hold the mirror, must have a high strength and reliability.
Tip: When carrying out installation, special attention should be paid to the materials to be tested, and manufactured using high quality technologies, as there is nothing worse than collapsed mirrors.
There are several types of mirror ceilings:
- stretch ceiling.
Stretch mirrored ceiling - it's almost normal tension structures, and therefore its installation is no different from any other. Let's see what kinds of structures have:
- Parts can be clear or tinted, so they are a good alternate.
- also can be applied to the mirror image, which may be different technique.On the plate is well applied, any hollow patterns, which vary depending on the lighting.
- As mirrored ceilings, then they are simply applied a certain coverage, a photo which presents manufacturers.
- As previously mentioned, installation should be made on the cleaned surface, so you need to work and work hard to remove the previous materials and to align the plane.Most preferred base surface primed or putty, since it is cheaper and faster, but in this case the slab may begin to fail.
better to work hard and to sheathe the ceiling.
Installation mirror cloth
- Further training should be carried out mirror cloth.In that case, if the installation is carried out with their own hands, then it is best to cut the glass cutter to any figure who wants.
It is important to make sure that the edges were straight as irregularities spoil the aesthetic appearance of the connection.In the case of uncertainty in their own abilities is best to seek professional help, which in a short time accurately perform all the work.
- Next tile to be drilled in the corners in order to put it on the screws.In order to better focus on this issue, you can see the special themed videos that greatly facilitate the tasks.
In that case, if the ceiling is made of a polystyrene web, it must be leveled under load.Thus, it is desirable to leave it for a few days at a temperature which will correspond to the room in which the structure will be installed.
- The next phase - installation.It is carried out using glue and screws.Pre-applied adhesive around the perimeter part, and cross - wise.
As polystyrene web, then it is either kleetsya with a special layer applied to the turnover, or glue.
- To maintain the appearance of the ceiling, it must be constantly cleaned. This should be done as well as the care usual mirror.
polystyrene fabric can be washed by means of plastic products.
In addition there are also mirrored ceilings and mirrored walls, where the main aspect is the glass from floor to ceiling.Installation of such mirrors is carried out taking into account the working conditions set by the curvature of the walls and design tasks.
It also ignores the fact that such large mirrors have a thickness of 4 mm, so you need to handle them very carefully.
This installation is carried out with the help of hardware and adhesive - for greater reliability.In if the distance allows, it is desirable to make special supporting bars.
If the design includes the decorative elements around the mirror, the first mirror being installed, and then elements of the decor.This manipulation eliminates gaps.
- Installation on the tile. In this case, the mirror from floor to ceiling is attached with glue to the outside.When properly installed on each side there is a gap not exceeding 3 mm x which is easily removed trowel.
- Installation huge mirrors. In that case, if the mirror is on a high, but really great, the adhesive mount and operate accessories with the mandatory use of platformers bars, performing the role of support.
As the instruction of any adhesive on its complete drying takes about a day, after which removed all the support in addition to hardware.Next
checked the mirror.This is done by means of a visual inspection of the gaps in the joints of the mirrors with openings, reliability fixing accessories through various influences on the design and attachment points.
Do I need to make a wall mirror or mirrored ceiling - it's up to the owner.This design is perfect not only for luxury accommodations, but also for the minimalist decor.
However, it is better not to take risks and to consult with the designer, who can accurately answer the question whether the approach mirrored option for your interera.V if it's perfect, you need a responsible approach to the choice of materials and installation process, as the onlyThey depend on what happens in the end: the pride of the owner or ...