are going to make repairs in their own home or office, every owner wants to get excellent results at the lowest cost of labor and equity.The choice of material for the ceiling - a special moment, you have to be very careful because of the variety of materials, not all are suitable for finishing the ceiling.
Any builder or specialist finisher confidently say that the cork floors to the ceiling - the most suitable material of natural origin.This finish is equally good for the bathroom and bedroom.
What is cork?From which it is made, and how?
coverings of cork - is, to put it simply, dressed bark oaks, which grow on the island of Corsica, as well as in Spain and Portugal.
manufacturing process materials
- Oak bark carefully sorted;
- Raw pressed into blocks;
- compacted slabs are cut into blocks of which have already made coverage.
- This production process allows to obtain an environmentally friendly, durable and extremely lightweight material that provides excellent resistance to a variety of adverse effects.
- sound and thermal insulation properties provided by microscopic airbags that delay and cancel the sounds and retain precious heat.
- for mounting cover most preferably a quality as easy to set the coating does not need to have special skills, remarkable strength and a special set of tools or equipment.
- Cork ceiling coating has a high abrasion resistance, which is caused by the special structure and chemical composition of cork.The most unstable layer of material - a veneer, which is to increase the strength coated with lacquer.
- cork ceiling used for decoration pools, with the cork will not rot even in such harsh conditions, when the cover is in constant contact with water.This cork is not only not broken and does not decay, but does not lose its original form.
can also highlight the following advantages of cork:
- excellent sound insulation properties due to the special structure;
- ceiling insulation - cork does not release heat from the room;
- Safety Health inhabitants - coating provides an antistatic effect, which is not conducive to the accumulation of dust and dirt;
Tip!According to experts studying cork ceiling, it is able to repay the harmful electromagnetic radiation up to 80%, which gives another positive argument for supporters of all natural.
That looks like a cork on the ceiling, you can see in the photo, which is set on the Internet.
What is surprising is the fact that whatever wonderful cork and whatever difficult and expensive its production, its price for the majority of consumers remain quite affordable.
How to mount cork ceiling
to work with cork flooring will need:
- Building square with a ruler;
- rubber roller;
- trowel with fine teeth or wool roller;
- twine or string;
- contact with water-resistant adhesive;
- Cloth (rags) or sponge.
Nuances use of cork materials:
- cork used solely for finishing the interior of your home or office.
- I want to say a single word about transportation cork blocks.Tote cork must be strictly horizontal position, packed in cardboard boxes.
storage in the same way.
- After the material is delivered, it should be kept in a room without unpacking, where it will be mounted, at least 48 hours, so that the material "used", i.e.acclimatised. For two days jam becomes room temperature and a certain humidity.
After holding the package may be removed and immediately ready for installation.
installation instructions cork coating on the ceiling with his hands:
- Prepare the surface of the ceiling.The surface must be absolutely dry, clean and smooth.
- To align commonly used plaster or putty, carefully dried and oshkurennaya sandpaper or a sanding machine (sm.Shlifovka ceiling doing the right).For best adhesion on the surface of the ceiling should not be any substances or coatings that may prevent it.
select material needed to align in accordance with the manufacturer's recommendations cork;
- Before installing cork, each panel must be inspected for various defects or damage.Defective or damaged coating is better to put aside, they may be useful for mounting small fragments;
- marking the ceiling is made with a plumb, a tape measure and level building. through the center of the ceiling is necessary to draw a line perpendicular to the two-axis.
Center can easily be traced back to the intersection of the diagonals.
- Now you need to mark the location of the first panel, starting from the corner, which was formed at the intersection of the lines.
- now need to measure the space, if it turns out that the width of the panels will be any number of extreme less than 10 cm, the location of the first panel to be changed.
- lines direction rows should be strictly perpendicular to the wall, from which and to which they are laid.If
- strongly uneven wall surfaces, perpendicular lines that can not be ensured, then the extreme number of panels you need a pencil to draw a line on which the panel should be cut;
lay the panels from the window so that the light from it fell not on the joints, and in the ranks.
- The best tool for the installation of panels is considered to cork pin waterproof glue, which is recommended by the manufacturer of cork coatings.
- work should be carried out only in a well-ventilated location where the temperature is not lower than 18˚S, and the relative humidity - 40 to 60%.
- contact adhesive is applied to the panel cork using a trowel or squeegee, and glue must be applied on the surface of the ceiling.
- directly connect with the surface of the ceiling panel is not necessary, you should wait 2-30 minutes for the adhesive to dry slightly began .After this time must be accurate to the millimeter to install the panel in position and press firmly to the ceiling.
- press panels, it is necessary to roll the roller and the rubber mallet to tap the entire length.Got out from under her excess glue must be removed with a cloth or sponge.
- Be careful contact adhesive immediately fixed, and move the bar from a place you can not.If you notice that the panel is glued unevenly, the only option will only tear it off completely!The remains of the dismantled
panel must be carefully removed, clean the surface, apply a new layer of pressure sensitive adhesive glue and start a new panel.
- first panel must be attached at the center of it can be glued to the edges of the other panels.It is best to put a series of panels in the same direction to the edge, and then start the installation of a number of panels in the opposite direction.
- Nothing complicated, cork mounted on the ceiling, even a beginner can.If you have any difficulties in the procedure of installation works, you can watch video on the Internet, as the installation is made by professionals, then everything will become clear.
How to care for cork flooring on the ceiling
Ceiling cork is made from natural material, which tends to expansion and contraction during the heating season or unheated, so the gap between the panels can then increase, then decrease.
This property can be interpreted as a defect of the townsfolk and workmanship, it is not so, at different times of the year, and the gaps should be changed, if you are not able to provide a constant indoor conditions.Terms and conditions can be maintained by using various climatic equipment: air conditioners, fans (sm.Potolochny fan with a lamp: advantages and applications), and other moisturizers.
Tip!Prerequisite operation cork - this restriction is getting to cover the direct sunlight, because of which the cover may fade as any natural material.For security, you can use curtains, blinds or tinted.
- Clean coating is required with a damp cleaning or just vacuuming once a week. If there is stubborn dirt surfaces that can not be detergents, they can fine sandpaper to clean off this place and cover with a special varnish or wax.
In any case, follow the manufacturer's recommendations.
For someone enough to finish cork covering only the ceiling, but in order to enjoy all the positive aspects of this material, we still have to finish cork floor and walls.But cork is perfectly combined with other building materials: wood, plastic, tiles, plaster, wallpaper and many other materials.
Just on our website you can learn about how to make a bamboo ceiling.