Without resorting to skilled care is not always qualified, you can figure out how to install PVC panels to the ceiling properly and quickly.And hold his own installation, saving a solid stock of banknotes.
Do not delay, and without wasting time on arguments about materials and their quality, proceed to the nature of the process.
Good to fine and relatively complex work with your own hands can be very serviceable in the presence and functional tool.
saw and shovel ceiling do not, so be prepared in advance and check the following items:
- hacksaw with fine teeth, lateral;
- hammer weighing up to 400 grams;
- gun staples;
- desirable - planer.Average, but sharp;
- Drills shock function screwdriver;
- screwdriver or separately;
- measuring tools and marking accessories;
- Building level 1 meter long;
- Screwdriver slotted screwdriver and curly.
Supplies and parts are not conducting a conversation, it is implied.The calculation is made accordin
This example describes how to install PVC panels to the ceiling in one layer.
procedure for preparation
further installation instructions plastic panels on the ceiling will be given in stages.We must start with the preparation of the surface, though, there is a perception that cook something it is really not necessary.
misconception, of course.
necessary to remove all the volatile elements on the ground.What it is?
paint the plaster, old mortar in the joints cracked ceilings, hanging paint flakes and so on. desirable to remove the old whitewash, and primed the surface, it will prevent significant dust (unavoidable) inside of your ceiling coverings.
Accordingly, the primed or painted base will reduce the amount of dust in the room at times.Align the base, even if it is with large differences level, pits, and overwhelming, it is not necessary.
It is necessary and when you are installing PVC stretch ceilings, and in all other cases with the installation of any ceiling.
panels need to pre-enter the room where the repair will be carried out to collect the required materials are humidity and temperature. Just unpack the pack is not necessary, but desirable leakproof film.
If the material before this was in stock with the air temperature is below zero, the panels need to have a complete rest for at least two days.
Important: If the frame to be used wooden blocks, these must be kept for at least a day in the same room for a set humidity.
is preferred to carry out the framework of alyumoprofilya, as the material has a low weight. In some cases, you can apply to the frame pieces of wood cross sections up to 40x40 mm.
General rules are the same for all the skeletons ceilings:
- noted the required distance in the corners of the room, on the perimeter of the room bounces horizon using a spirit level (preferably water), or by masking cord spacing.
- The perimeter fastened basic guide - with a pitch of 500 mm and the distance from the edge less than 250 mm.The lower bound of the guide should be based strictly on a broken line.
- By area attached hangers designed for holding the frame at a distance from the overlap.Step suspensions - 600 mm.
- on the suspension and the main rail mounted cross (bearing profiles), but that will be the installation of PVC ceiling.The connection is performed according to the rules for the installation of a specific material, fasteners must either be sold in a set, or to be designated in the instructions - the size and fixing the rules, from places to distances.
- Certainly every single frame member is checked during installation level.
Important: The lower profile rails must be placed transversely to the direction of PVC panels.Across - is perpendicular instead of under unknown angle!For reliable information perception look at the photo of the finished carcass.
There are some nuances that need to be taken into consideration:
- If you do not use metal profile, and work with the bars, keep in mind that the material must be pre-impregnated (antiseptic). tree is not combined with plastic, and the point of contact will get wet.
also need to protect the bars of fungi;
- Usually ceiling moldings installed a special attachment even before installing PVC panels to the ceiling;
- Where the planned suspension elements of the interior, up to the ceiling lights, you need to strengthen the framework, that is to fill the additional bars or fastened metal profile.
Technique fixing the most simple, nothing special.Determined by the design of the panel.
Hardware sold or supplied or separately - then you have to specifically choose, and not take the first available.But the subtleties are not described anywhere, even in the instructions for installation of this particular batch of PVC panels.
Therefore it is necessary to know the following:
- Attach the panel should be consistent.Fixing all mounting shelves on one, move on to the next one.
lock design is such that after hanging following a previous panel has already been secured.On the thematic video you can see how it is done;
- especially should definitely put on a level and on the geometry of the first panel. joint gap is almost impossible, so in the future you will not be able to align the curvature due to tolerances in the joints;
- Each subsequent bracket must be inserted into the groove of the previous to the limit, until it stops.Cranky design will please no one.Watch out for seals!
Important work with PVC materials when cutting or trimming the length of very carefully, as if careless actions can simply split the entire panel, which cracks literally from all redundant efforts.
Sawing PVC panels need a hacksaw with fine teeth, try not to reject the web during the cutting of a plane perpendicular to the surface of the panel.Remember, what is the price of a single socket.Hitting on the surface is also no need to split.
Installing PVC ceiling - work that requires accuracy and only .Any difficulties it does not provide detailed descriptions of technologies and clogging Carnation fixing shelves for self-builders are totally unnecessary.