How to glue the ceiling tiles, the issue of interest to many.And he has the answer.It
do not as difficult as it might seem at first glance.This work can be done with their own hands, and this reduce the cost of operations.
In this article, and will talk about how to properly glue ceiling plitku.Vse types of this material are mounted about the same.However
have their differences and nuances in performing this work.Let's understand all over again how they differ.
Let us photos and videos and make the right choices for material.After that will be given full instructions for the implementation of this work.
What can consist tiles
This is no small matter that should be considered when choosing the material.The elements consist of different materials and therefore can be mounted on different bases.
Especially should select the material and type of premises .Not every element can withstand eg high humidity.And the price
tiles may differ significantly, it also affec
types of surfaces
Let's see what this material is different from the others and under what conditions should it choose:
- elements in this embodiment are covered with laminated, that is covered with laminate.Different colors and a rich variety of shades;
- This material is waterproof and has a long service life.Suitable for mounting in places with high humidity, so no problems can be installed in the bathroom and kitchen;
Many may give preference to this type:
- seamless tile has the straight edge and can therefore be mounted almost seamlessly.Perfectly can approach the installation in the hall and office;
- easy to install and maintain.It especially does not have to handle at the edge of the mount.
- As a rule, it is made of plastic and is applied to the front of the mirror layer ;
- may be square or rectangular in shape so it should be used and not the standard rooms;
- is possible to visually enlarge the room, so you can attach and no large buildings.
to work was not a burden, and require minimal effort to install, should choose the right material.When choosing pay attention to some details.
from this and will depend on how to glue the ceiling tiles.So
- When choosing pay attention to geometric form.She should have the right.Pay attention to the corners, they should not be rounding, otherwise you have a problem during the installation;
- When fixing the gaps will be formed, which would spoil the appearance;
Warning: When you buy take a few elements and attach them to each other.There should be no deviations on the edge of the tile.
It should clearly be based on each other and do not have a propeller.Some do not sell body condition under the guise of a quality product.Tile should be identical in size.
If you chose the foam tiles, should be given to grain, it must be the same.The smaller the grains, the better.
Pay attention to the edge of the elements.In these places it is most crumbles.
Just look at the damage can not be done seamless construction.How to properly stick ceiling tile seamlessly if edge crumble, that no one will say.
monitor the quality of the purchased material.
and attention should be given to the relief pattern:
- It must be clearly displayed and not blurred;
- If you prefer ceramic products, then simply take a few elements of the edge and see that they are not broken down by their weight .If it does not, then the production technology is sustained.
Installing the tiles on the ceiling
How to properly stick ceiling tile and will be discussed further.According to the material you have decided, now we have to deal with the installation.
For every job has its own rules that should be followed.Only then it will be executed with high quality and will not cause you problems later.
Cooking basic ceiling
The whole structure will be attached to the base.if the surface is not prepared properly, then nothing happens.It will not be correct geometrical shape of the plane, and the elements may simply not hold.
do everything for themselves. First, prepare the plane, and then determine how to glue the ceiling tiles.
- To begin to understand how we prepare the surface.To do this, define its plane and deviations.
After facing a large drop of the surface will be evident, and this is not allowed;
- determine the correct placement can help us to hydraulic level.It will determine the most accurate picture of the location of the base ceiling.
You can do it yourself, or buy ready-made in the retail trade.Find the lowest corner of the room and put a mark.
Then add the thickness of the material, and also set the mark;
- now transfers this size on the other walls.To do this, just come in handy on the hydraulic level, by which we will move most correct size.
carry and put a mark;
- After that, we need to connect all marks.To do this, we will use the nylon thread.
With it we connect and Otobaya this size;
- Now we have a perfect mounting plane around the room, which is indicated by a solid line.How to ceiling tile glue and we will held the line;
Warning: Now, we look carefully on the line and decide how to glue the tiles on the ceiling right.If the deviation from the base of the ceiling is not more than one cm.
Then we can do the job right.If the deviation to 2 cm, then it is necessary to plaster the plane.
If the deviation is more than 2 cm, then you should think about leveling the surface with drywall.
- Watch and determines how to glue the ceiling tile according to the recommendations given above.On our site there are detailed instructions on how to perform these operations.
on plaster and leveling plane.We show you how to glue the ceiling tiles with small deviations;
- For a start, we fully cleanse the surface of the ceiling wallpaper, wash whitewash.This is all we will only interfere.
There are companies that offer a glue tiles directly on the ceiling mount or whitewashing kraske.No can be read on the forums as some are disappointed after using such products.
After the adhesive will pass and not through any coating.And all the work can go down the drain.
So it all should be removed.After all, the product is one year.
most qualitative elements are mounted only on a prepared surface;
- After removing the cover we see the surface for cracks and sinks.If there is not a lot of damage with a depth of 5 mm.
Then mount can be performed on them.If there is significant damage, then we need to putty ceiling;
Note: You must first make the inspection and make sure that the plaster does not peel off and has no cracks.Where it began foliated.this place should be obbit to a solid base.
Where there are large cracks, they must be broken down to one centimeter, and then putty.Installation should only be performed on a hard surface.
- Now we understand more how to glue the tiles on the ceiling.Before installing the same plane should be checked for the presence of mold and mildew.If you install
spend without eliminating this disease, you run the risk that damage will manifest through the seam.And it's very likely.
Therefore, detection of the disease, should be treated with the surface of antiseptics, which are commercially available.Do this a couple of times and let dry completely the surface;
- Now when all peeled and putty, you can decide how to glue tiles on the ceiling.When installing the ceiling, unless of course a good flatness can use glue.
If there is a deviation, and it happens in most of the options then you have to do with fixing putty.How to glue the ceiling tiles in the plaster, we describe below;
- now covers the surface of the primer, which is in the retail trade. give preference to cost liquid deep penetration, that she would give a quality connection.
Before you glue the ceiling tiles, we have to do the layout.Especially carefully.
From this will depend on the appearance of the whole plane.Therefore, this work is not necessary to avoid mistakes, to do everything carefully.Installation can be done in two ways, which we will tell.
Note: Bring the tile to conduct fixing a day earlier.It has to get used to the temperature and humidity of the desired type.
- In the first embodiment, the operations should be applied to the two lines, which must be perpendicular to each other.Place of intersection and will mark the beginning of work.such markings will enable the most optimal distribution of elements.
truth must be said that with this installation may increase significantly and waste.And it should be taken into account in the procurement of material.It is not necessary to take it back to back.Make
error in the direction of increasing waste;
- The second option is more economical on material consumption.There fixation is performed by a single line.
It should connect the centers of two opposite walls.Here you can make when buying an error lower than in the first embodiment.
When applied should take into account the layout pattern that you selected .From it can also depend on the point you start the installation.
You may want to make other color fringing plane.
then need to change the layout, and to do otherwise:
- In this version, you must first draw the correct figure on the ceiling.To do this, and take into account the size of the items.
Best of all, when a figure enters a whole number of elements, and do not need to cut.From this may hurt the appearance of the whole plane.
Calculate correctly.Full range of possible bit shift.
Do not worry, it will not a big gap from the wall.It will cover the plinth.
This is an article on our site.
We still have the right to choose, and this element of the interior.It should apply the correct shape and geometry.Gaugeable diagonally using cord yarn.
will be frustrating if you have to insert the elements are not equal.Therefore, all carefully calculated and apply labeling.
Then you can and think about how to glue the tiles on the ceiling.
This is a pretty serious issue, because the quality of the attachment will depend on the lifetime of the structure and the forces spent for installation.Therefore, go to the question seriously.
Note: During the purchase, prefer shopping rather than stalls.Especially in the winter time.If
dry mixture peremerzla, you will be hard to make a smooth paste.And if she peremerzla, eating a high probability of loss of material properties that adversely affect the quality of the installation.
- To prepare the solution is best to use a plastic bucket from under the paint .It has a flat bottom corner and the most adapted for the batch;
- Take container and pour it in the water about a quarter;
- then start it by adding the dry mixture is admixed simultaneously.Take your time;
- After adding dry mix we need to make a smooth paste without lumps.To do this it is best to use a mixer or a drill with paddle.
With these devices can be qualitative solution;
- mixture worked with the drill head.We would like to state liquid cream;
mount ceiling tiles
now sticking ceiling tile on the prepared surface.Do not forget that should be pre-primed with a plane without this will not turn out high-quality connection.
- Before starting work, you should rearrange the tiles and place in three different stacks according to size.In the middle of the pack to get the most items.
With her and should start;
- Eats two ways of applying the mixture to the surface.In the first embodiment, the mixture is applied to the ceiling.
For this purpose we have a practice and a novice is not suitable.Better then we will be applied directly on the tile;
- Take the item and using a comb trowel apply the mixture.Height of which should be of the order of 5 mm .;
- then applying a direct rail line on the mount and presses;
- We put the tile and pressed.Makes it shrink;
- Along the edges of the solution appears, we will immediately remove with a spatula.
Warning: Before attaching do not do it right away.First is to attach an element to the surface to dry and only then applied to a mixture.
If it is not enough quality fits, it should be removed with a spatula.
- immediately should look at the joints of the elements.If you want to, then they need to trim.
The soft material is done with a sharp knife.The tiles you can do this using a grinder with cutting wheel.
Watch this.If you make an error, with each element, it will only increase.
Bonding ceiling tiles must be carried out efficiently.This applies particularly to seamless coverage.
- If you decide to make a design with any figure, such as a diamond, then to begin to properly draw the element on the ceiling.
Then decompose the entire pattern on the floor and place the elements correctly.ceiling tile adhesive starts only after that.Clay tile ceiling only after we understand how it should be placed to not vice versa.
first sticking, and then thinking about how to remake.
Now you know how to paste over the ceiling tiles.It remains easy to handle and suture to attach the plinth.
This work is not that complicated.And it can be done by hand.Only the main thing is not to rush and do as instructed.
Then all you get.