modern version of finishing the ceiling decorative tiles is quite popular.Of course, there are other materials, but this method finishes justified for a number reasons.
That is why it is worth considering the question, what are decorative ceiling tiles, and from which they are made.In addition, it is important to be aware of their advantages and disadvantages, as well as possible ways to install.
types of tile ceiling
To start, you should understand what are the options for ceiling tile installation method.
If we consider the method of gluing tiles to the ceiling, it is the most common variant in Russia.
- To start glued decorative ceiling tiles is quite simple.
- In addition, this method helps to hide surface defects, excluding performance of major repairs .
- Moreover, the use of a special composition for the treatment of the ceiling, you can do the job right on the whitewash.
- This method is not expensive cost.
- procedure pasting the ceiling tiles of this type will do the job not even a professional.
Instructions for laying tile on the ceiling:
- First of all, the surface should be clean, wash whitewash.It is also important to clean the plaster that peels off and the entire ceiling is primed.
- use universal glue will stick to the surface of the tiles of foam or polystyrene.Typically, this decorative tile ceiling is white.
When working with her the edge material can be placed in parallel to the walls or put them on the diagonal.
Tip!Finishing the ceiling tiles with their hands PVC involves cover furniture in the room film.This is necessary in order not to soil, and not to spoil it.
- to work looked interesting, it should be used to complete the space between the ceiling and wall moldings special .It is usually also made from foam and polystyrene.
However, this method of simple and inexpensive finishing the ceiling is already beginning to go out of fashion.That's because there are new modern technology repulsive ceiling decorative plates ago.
question arises why their popularity is gradually falling and what is the reason?
Maybe it's some shortcomings:
- foam and polystyrene have a nuance, as the collection of dust, soot and grease on its surface.And the first type of contamination can be cleaned with a rag simple, but the other options are not laundered.
Tip!If used for finishing ceiling tiles made of polystyrene with a protective film, it excludes the presence of these shortcomings.This is because it is good to clean the surface of any detergent.
- This type of decoration suggests the presence of joints between the tiles.Therefore, the surface appearance is not quite presentable.
Speaking of tension ceilings, it will clearly lead here.
- addition, decorative ceiling tiles, hides only part of the surface flaws.Therefore, it will not save, if any overlap with a large difference in height.
On the contrary, this finish will accentuate the existing defect.
This option is stacking plates on a special slatted frame.The distance between the base surface and the finish can be significant.
These decorative ceiling tiles have great advantages:
- It uses the frame, so the existing distance between the two surfaces can be used for the benefit of .This means it is actually hidden in the space of water, ventilation system and any other communication.
- If there are large differences in height and significant surface defects, they can be safely hidden.Therefore, the surface is perfectly flat.Given the option
- laying without fixing it is also profitable.This is because the desired area of the ceiling at any time can be repaired, eliminating global repair work.
- The most common case is when water flows through the ceiling.Option glued tile suggests its replacement.
So, the damaged area is removed, after which the surface puttied and again all glued.If this decorative ceiling tile suspension, it is necessary only to remove the damaged section of the lattice.
Then place the spoiled material to put a new part.
- only upset here that this type of finishing the ceiling are all the shortcomings that are present all suspended structures.For a start height of the room would be lower by about twenty or thirty centimeters.
Therefore, if the room is not high ceilings, you should consider whether it is necessary to pay attention to this method of decoration.
Forms tile ceilings
Decorative tiles to the ceiling varies not only by the method of attachment, but in his mind .It turns out that there are differences depending on what kind of material used in its manufacture.
And each option is preferable to use for each particular case.
Typically, fire safety and ensure the minimum use hygroscopic tile type Akmigrant.It is made of granulated mineral wool, and with the addition of asbestos fibers.And
binder material is clay.Produced such tiles using a special technology by pressing.
The result is a micro-cracks in the material, so it allows the tile to have sound-absorbing properties.In addition, there is a high level of fire resistance.
Yet this material is widely used in the headlining theaters and conservatories.Indeed, thanks to this material, you can increase soundproofing, as well as to improve the acoustics in the room.
We are talking about a transparent acrylic material.Ceiling tile design that looks just great by giving the illusion of depth.
- This makes the room visually higher.Therefore, this option is beneficial for small rooms.
- In addition, it can help to hide the lighting system.If you add a diffuse color, the effect is simply stunning.
- important advantage of this tile is not the fear of water.Therefore, after the flooding it simply wash with soap and water.
After her return to the original appearance.It emphasizes the benefit such tiles on the background of PVC material.
Besides their price is much lower.
most expensive cost is overlooking a wooden ceiling.Moreover, its performance characteristics are much worse than all other types.
After the tree is afraid of water, and can also burn and rot.Although if handle material and preservative varnish, some drawbacks can be eliminated.
All because this ceiling tile design that often leaves many impressed.After all, she just gorgeous appearance, because some downsides to it forgivable.
If you use cork, it will still have sound-absorbing properties.
Mirror glass tiles
This option is often used for rooms where you need to expand prostranstvo.Pravda to work with such material should be cautious.
especially should pay much attention to the strength of the frame.After tile is heavy and sharp edges.
Therefore, it is important to buy products known and reputable companies such as ceiling boards kindekor.
If you perform design ceiling tiles where the coating is made of metal, the material will last for a long time .K addition, it is strong and not afraid of water.
However, good insulation can not provide.
turns out that the process of installing the ceiling tile is not difficult.Run a job well can a person with minimal construction skills.
If something does not work, you can always see the photo in the intern, which shows the steps of mounting this type of material.In addition, there are a lot of video lessons, so the task can be handled independently.