To perform painting ceilings, mostly use pobelochny composition made on the basis of slaked lime or chalk.Before making whitewash ceilings required to perform some preliminary work, namely: it is necessary to wash using warm water for this, old white, and then perform smoothing plaster, remove cracks and cover the ceiling of the primer.
It should strictly ensure that there are no gaps - places where the old paint left.
Finish ceiling coverings
This will be the final stage of finishing the ceiling coverings. and the need to treat with great responsibility.As a result, you can completely spoil the whole plane made earlier.
Like any job, it also requires preparation:
- rust and stains must first wash with water and then processed by means of the fungus (sm.Gribok ceiling - the emergence and solutions).
- sooty ceiling surface should be cleaned by applying for a 2-3 percent solution of hydrochloric acid.Naturally, when using acids, care should be taken for safety.
- for smoothing (Facing) plaster should be used a piece of wood;then, with a knife or spatula have to clear the crack to a depth of about 2 millimeters, and repaired them (see: How do seal the crack in the ceiling, the actual recommendations).
- In the absence of a primer mixture, it can be prepared with their own hands.In order to produce a primer, it is necessary to take one piece of plaster (by weight) and two parts of chalk and wood glue (diluted).
All this is mixed until until a mass resembling dough.
Only after the completion of all operations for the preparation of the ceiling, you can start applying the first coat of whitewash.
Note: Choosing to work pobelochnyh lime, should be in the store to buy materials only slaked lime.In order to obtain an ideal white color composition, the solution is added to the bucket polstakana common salt.
To produce whitewash recommended the following composition:
- 2.3 kg of chalk
- 90 grams of wood glue
- 17 g methylene blue (ultramarine)
- 60 g soap
- 3-4 liters of water (up to a working consistence)
Adding ultramarine in the whitewash used to lighten the ceiling.Glue it is necessary first to dissolve in water.
All components are mixed and diluted with water to the concentration required for the application of spray formulation.Pobelochnogo composition made of the amount is, should be enough to whitewash the surface area of 10m2.
are the most common part of white limestone (per 10m2 ceiling 2-3hsloynoe coating):
- 2 kg of slaked lime,
- 50g soap (which Grate),
- 90g divorced carpenter's glue, and three liters of water.
- To composition turned snow-white, you can add a little of the solution blueprints.The concentration should be similar to the saturated milk.
if necessary, can be further processed using the color scheme ceiling.So
- Kohler should be applied two or three times, doing it slowly, so that no smudges.
- first layer of caramel should be applied with a roller, and the next two - spray.
- Spraying whitewash must be remembered that the surface should reach the outskirts only small droplets, or may smudge.
can, of course, apply whitewash the ceiling, not only roll, but with a brush.However, in this method, the first layer composition should be applied from the window to the wall, and the second - in the opposite direction.
This is done to remove traces of the use of the brush. Brush for these works selected wide (15-20 cm), and before using it should be soaked in warm water.
For those who have taken the first time for such work and does not know how to whitewash the ceiling lime, the best option is to use for this roll.So
- roller immersed in a container of Kohler rolled along the inclined surface of the fixed mesh (to remove excess paint),
- Then they can work like kistyu.posle processing roller, ceiling surface is often obtained with a pleasantmatte sheen.
- After whitewashing the ceiling should be allowed to dry properly.Force drying is not necessary: a high probability of destroying all that is done.
drafts, as well, to what, and when direct sunlight, to darken the window.Otherwise, you can get a peeling whitewash.
Note: Especially for those who want to use lime as part of the composition of pobelochnogo, I want to remind you that you need to whitewash ceilings 10m2 1700 g of slaked lime and 40 g of methylene blue.To accomplish priming work prior application aqueous lime pobelochnogo composition is best to use a primer, the composition of which was described earlier.
try to understand how the lime ceiling, causing part of the old plaster.
- First we need to properly clean the old plaster.
- Thereafter, the surface coating composition of the milk of lime and 2-4 percent of the varnish.
- Then, this composition is overwritten by a flat and wide brush.Do not forget that the longer the dry surface, the coating material life.
For this reason, all these works is best done in cool weather, in the same rooms, which are located in the sunny side, you should whiten morning.
Generally, if dig deeper on the World Wide Web, you can easily find the video telling wisdoms about how to whiten the ceiling lime.In addition, stores often sold ready-lime wash, on the packaging which contains instructions for its preparation and a description of how to whitewash the ceiling lime easier.
addition, all in the same web, you can, if you want to find and master class of similar works provided with the necessary amount of photos.In conclusion, we note that of all the variants of the ceiling cover, this variant lowest price.