Nowadays many are soundproof ceiling.Builders save on high-quality materials, so the owners themselves have to address the shortcomings.
Now, many have begun to apply the ceilings soundproofed.It has its reasons.
fact sheet itself acts as a noise insulation.But in order to enhance the effect to be applied and new material, which is necessary to choose the right, and then install.
This will be our article.
makes the right noise insulation
For a start it must be said that to get rid of noise in the decoration of the ceiling does not happen.In this issue involved and the floor and walls.
therefore possible to this issue should be approached comprehensively.But properly equipping the ceiling you get rid of many problems, because it is through it gets the highest number of sounds.
Now let us decide why tensioning system will approach us.After all, there are a host of suspension systems.So
- Suspension system using eg plasterboard and other materials, it is rather rigid structure, which reflects the sound is not so;
- Also worth mentioning that the frame to which is attached the whole system, it is rigid and therefore perfectly conveys itself all the noise;
- in stretch ceilings reference plane involved is extremely small, all connections are made on the walls.That facilitates the penetration of outside noise;
- Finally sheer cloth, it is itself a kind of membrane acts, which absorbs sound.
Soundproofing a suspended ceiling is done using a variety of materials and the correct choice of which is also quite important.These elements are mounted on a base ceiling and the ceiling make the least zvukopronitsaemym.
noise insulation materials are different in content production, method of installation and thickness.And in this regard should be defined prior to installation.
Warning: We should immediately take note that the best way to absorb the sound soft and porous materials.As can compete with them materials with a fibrous structure.
So first of all it is necessary to pay attention to such elements.
- The first is called mineral wool.This material is often used when working.
It is not difficult to install.It has a soft, fibrous structure.
not increase the weight of the whole structure.Not difficult at conducting installation.
may be in the form of mats or rolls.It does not shrink in time;
- Noise stretch ceiling with polyurethane foam.It occurs a little less, but still in demand.
This material is perfectly cope with the shock noise.Pretty good lies in the reference plane.Not susceptible to temperature changes, but also has a significant drawback.
In combustion emits noxious smells.The price of these elements is not high.Easy to install;
- Next Next other products that are made on the basis of stone wool.We will not list them, in the retail trade are a lot of elements.This
plates which have a fibrous structure and implemented with different thicknesses.The fibers are arranged randomly, and that is a good barrier against the penetration of the sound.
Attention: Maybe you should not apply in his ceiling is not blown materials such as foam.These elements have a honeycomb structure, it is not bad, but they have a low level of sound insulation.
- a good sound insulation by means of panels that contain mineral basalt base.Do not use panels that contain fiber, it can harm health;
- Eli have limited ceiling height, then you can apply penopropilena.This material is easy to install and will not harm your health;
- In our time there is a new material for sound insulation.He serves as insulation.
not allow the penetration of moisture and is not conducive to the formation of condensation;
- can use several materials, it all depends on the nature of sound.Sound insulation can be done in several layers;Before buying
- see phot and video materials for you to have representation
Even when you select should abide by some expert advice:
- In the conduct of work, pay particular attention to the tightness of the whole structure.From this, much depends;
- Before choosing the material required to determine what kind of noise you want to remove.On this will depend on the type of construction;
- While conducting work should pay particular attention to the insulation of engineering networks.If you do not quality, then it passes through them a large amount of background noise.
in retail for these purposes have materials for facing such facilities.
Terms of sound insulation performance of a suspended ceiling
Make soundproofed ceiling stretch not so difficult.This work can be done with their own hands and without the need for outside help, and this reduce the cost of the entire structure.
Only this should be done according to certain rules and respecting the sequence.Only then work will be done qualitatively.
Especially providing it at the design stage of the ceiling, and you do not spend too much.The price of the material is not as high.
Then follow instructions and expert advice on the implementation of this work.
All work begins with the preparation to be performed qualitatively:
- first step is to buy sheets and bring them to the installation site for the day.They have to get used to the temperature and humidity of the room;
Note: All work should be done at zero temperature.Humidity should be within the normal range.
Remember, the adhesive is applied only on a dry surface.If the humidity is high, you risk that the material will not last long.
- Before starting work, clean the reference plane of whitewash or paint (sm.Udalenie from the ceiling of the old coat - advice craftsmen).This you can read in detail in our articles;
- look at the ceiling and determine the presence of mold or mildew.If there are stains, then why not buy antiseptics, and eliminate the disease.
She later can bring in big trouble.The treatment is done at least twice.
When you purchase should be preferred liquid deep penetration;
- After drying makes handling the plane primer.That she would give a reliable connection surfaces, and will not crack the coating.
This is the first stage of installation.It should be done fairly accurately.
fact we should have a flat surface coatings.Having the correct configuration.Do not press
layer insulation.It all provides a framework.
- Now do the installation frame.To do so, determine its level.
find the lowest corner and put a mark.We add the thickness of insulation and put the mark again;
- After this transfer the size of the wall to the other.To do this, use the hydraulic level.
With his help is most accurately performed Buda;
- carry and make a mark.Now we need to connect all the dots.
For this use nylon thread.With its help repel the level of finding the ceiling;
- Now cut the profile to the desired size and fasten the line.For walls of wood screws are perfect.
If the plane of the concrete, have recourse to the gun. and make the connection with dowels;
Note: For the fasteners do not buy sets of anchors.Take pacifiers individually and they screws, diameter only take a couple of mm.Less
from orifice.It is this ratio will make fixing rigid and reliable.
this work is to perform well.This applies particularly to the tightness of joints.So
- now begin to mount noise insulation.To do this, take a plate and apply the adhesive on the perimeter.
Also, it should be applied, and in the middle.Pressed against the plane.We wait a minute.Releasing;
- After drying, it makes sense to improve the fastening, apply construction fungi.To do this, make the holes using the punch, and the connection is made;
Note: Remember, the plate can not deform, then they lose their properties.Material should lie firmly, but do not stick to it and press.
- We perform sound insulation throughout the plane and makes attaching fabric .
Soundproofing ceilings made almost simultaneously.Also applicable for this purpose and special inks that are applied to the reference plane.
If you're doing the right thing, and slowly, then the work will delight you every day.