not want a long haul dirt in the apartment?Stick in the bathroom renovation?Then
bathroom ceiling made of plastic is a lifesaver.A beautiful, flat, smooth surface of a material under the force of even one owner to mount their own hands.
It should be added separately, that its installation is fast and the price is much lower than the plastic panels of drywall, fabric paintings and paintings from polyvinyl chloride film (PVC).
So why still plastic panels from the ceiling in the bathroom is extremely popular, and how to do?So
- Plastic does not react with moisture, which is present in excess in the bathroom;
- panels of plastic is easily wiped and washed;
- ceiling of plastic panels will not be affected, even if the neighbors explode pipe;
- mold that lives in damp places, do not touch the plastic panel;
- panels look impressive, aesthetically pleasing, and there is a wide range of different colors and shades;
- Any surface defects, wiring, pipes Communications closed perfectly smooth, smooth, spectacular and aesthetic plastic panels;
- last argument in favor of the plastic panels - their durability.
PVC Polyvinyl chloride is used in the manufacture of packaging for food products, so the question of the sustainability of the material disappears.
Preparing for installation
Pre-determined distance from the working surface to the suspended structure of the plastic panels.From a distance lamps marked with a margin of 10-15 centimeters, as even the smallest light - height of 7-10 centimeters.
done marking lines on the perimeter of the ceiling on the wall.
Warning: Marks on the wall is applied on the level.
installation frame for suspended ceiling metal profile
in profile in two sizes. A 2.5 x 2.5 cm on the perimeter mounted on the wall, the second 2.5 x 6 cm - bearing profile.
- Saw (saw) metal;
- Screwdriver or screwdriver.
- a Punch holes drilled in the wall;
- screws attached profile 2.5 x.2.5 cm on the wall;
- self-tapping screws attached to the wall profile support profile 2.5 x.6 cm at two opposite sides;
- mounted frame and inserted metal profile.
frame for mounting a plastic ceiling in the bathroom ready.Done cabling in places of fastening of lamps, lights.
Note: Step profile mounting along the ceiling of 40-50 centimeters.
Constructions of plastic panels
plastic ceiling in the bathroom - installation begins:
- Slicing plastic panels of the desired size hacksaw;
- self-tapping screws to attach the first panel to the frame;
- one side of the second panel on the first sheet, the other - to the frame;
- plastic ceiling in the bathroom this way we fix the whole;
- last panel is attached to the frame;
- cut holes for the fixtures and connected to the cable;
- Closes joints decorative moldings around the perimeter.
Note: Panel cut recommended in the process, rather than all at once cut.Knowledge of safety rules of electrical installation works necessary or consult with a specialist or electrician.
plastic ceiling in the bathroom is mounted not only on the metal profile, but also on the framework of a system of well dried wooden bars.
plastic ceiling mounted on the frame of the timber
It begins with the same layout frame fixing:
- the corners of the bathroom down from the ceiling at a distance of 5 centimeters to put pencil risks;
- guides from the beam cross-section of 30 x.30 centimeters, with the marks attached with screws or dowels;
Attention: rectangular bathroom wall panels are mounted across the panel for better handling.
- Between Parallel and enshrined the guide rails are attached more every 40-50 centimeters;
- Plastic ceilings in the bathroom may sag if not fasten the plastic cover in the middle;
- to the length of the parallel rails attached «L profile" staple gun bottom rails;
- In this nest, and are inserted into the ends of the sheets.
Fix the panel to the frame
measure the distance between L profiles and hacksaw on wood with melenkimi teeth, cut a sheet of plastic panels with the size.One end is inserted in one profile, the other end, slightly bending the second profile.
If everything is measured accurately, noted marked out, the panel will take the desired position.It remains only to attach the panel to the edge of the stapler timber.Further
second and subsequent panels are installed, will not be closed until the entire surface.
plastic ceiling in the bathroom do not require a lot of work, knowledge and time.Guide, photos and video - all the attributes available, see, read, "do not mistake the one who does nothing."