bedroom ceiling plasterboard with lighting chosen by many as a design solution design premises.Externally, it can be said that this design is quite complex in implementation.
However, it can be done by hand and without assistance.This article will set out instructions for such work.You will learn how to pick up the ceiling lighting for the bedroom.
Types of lighting
Such structures can be divided into two types:
- Installing outdoor lighting, in this embodiment, a lighting system installed in a false ceiling and that made the holes.Either fixtures are hung on the plane.
- Installing hidden illumination, which is characterized by the use in multi-level systems.It has to do a special niche for mounting fixtures.
And the light has already been sent not directly to the room, and on the plane of the ceiling. This is a difficult job, but it is possible to create a unique atmosphere for relaxation.
plasterboard ceiling in a bedroom with ill
As a rule, such a construction is used fluorescent or LED lighting.And this is not casual.
This lighting is much more economical and longer serves.But LED design is much more practical, they consume less power and are easier to install.
It is a lighting installation we stopped.
to start to see what speaks in favor of such an arrangement:
- Ceiling Lamp LED bedroom give the desired coverage for a reasonable price.The efficiency of the elements is 50% higher.The other lighting devices;
- The design elements the self-adhesive tape, which greatly simplifies the management of installation works;
- You can buy a remote control, which allows to do remote lighting on the ceiling;
in retail trade presented a large number of such lighting, where a person can find exactly what he needs.
But these elements differ in some respects:
- Ceiling lights in the bedroom more often equipped with elements and SMD-5050 SMD-3528).The latter are more powerful and better suited for the bulk of the premises;
- also such tapes differ in density of light per square meter. most frequently used tape with a density of 30 and 60 elements per meter.
But there are also more powerful, which apply to 120 diodes.Such an amount makes the installation contour illumination;
- It should be noted that such lamps and moisture resistant and is provided with an additional silicone insulation.
Such tapes can have a single color and multiple colors can be used.This should be selected specifically for each room.
on this topic on our site has an article that tells about the principles and design solutions using lighting.
Note: If you plan to use the tape name, then you should think about the light controller.That will help to ensure the desired brightness.
If you do not pick up the correct lighting system and connection, then there may be trouble.We can talk about them, knowing that maybe you can avoid these shortcomings.So
- When selecting a power supply should be taken into account and such detail, some construction noise during operation.They also may get warm;
- Calculate the power consumption of the tape with respect to the power supply.Never take tailgating.Make
gap upward by 15%.Otherwise, this unit just will not pull the tape;
- LED strip and power supplies are made under different voltages.Be sure to check their compliance with the purchase;
- Take the tape only well-known brands.The market is not a lot of quality products.Which simply fade after a short period of time.
may initially dimly lit;
- choosing a controller, you should pay attention to compatibility.Not every tape suitable for any controller;There are spontaneous
- illuminate.This may also occur as a result not a quality inspector.
Note: When buying a tape also should pay attention to the degree of moisture protection.There are two types: IP 30 or IP 65.
figures show the degree of protection.The tape may be completely filled with sealant, or may simply be placed in a protective casing.
Therefore, when buying select exactly what you need.
Installing ceiling backlit
Ceiling lighting in the bedroom attached to the ceiling.You want to install.
only in this design has its particular installation.It is still not illuminated, and light.
Therefore, the principle of a single installation, but also have their own characteristics.
This grade ceiling can only be done on a qualitative basis, this ceiling.Which, in turn, must be placed on the frame (sm.Karkas ceiling plasterboard - all the little things or little things do not happen.).That's the beginning of it and should make.
- find the lowest corner of the room and put a mark.To this we add the height of the size of the profile and also set the mark;
- Now this size must be transferred to the other walls of the room.To do this we should apply the hydraulic level with which you can accurately do the job:
- Once transferred size, we need to connect the marks obtained, and for this should apply nylon thread.With its help line just bounces.
Note: If you plan to install additional insulation, think about it in advance.Please note thickness and insulation.
that should not be pressed to the ceiling.He has placed quite freely.
- Now, fasten the perimeter profile.For wooden surfaces can apply simple screws.
for concrete plane is used punch.And to make the connection with dowels;
Attention: Never take sets of anchors.Buy a dummy and then individually take the screws, for a couple of holes mm less plastic.
elements in the set do not give sufficient strength connections.
- Then do the layout and fixed hangers on the base ceiling.Which will be attached profile.
With their help, the adjustment should be carried out the ceiling.To do this is to fix the horizontal line and space to pull it.At its height adjusted profile;
- frame members should be interconnected by means of crabs that can lengthen the elements;
- Then do headliner plasterboard.And this work must begin on the corner of the room, which is located away from the window.
It will be the most favorable coverage
Attention: For correct mounting.Make the layout the ceiling.
first level label using a solid line, and the second note dotted.Please make the first level of trim.
second level to accommodate the backlight
We have come to the point where it is necessary to think about the lighting in the ceiling.Ceiling lamp for a bedroom in this design also affect the performance of work.
- We already have the separation of the first and second level.It will host the second level back down the order of 6 cm. And make a mark.
transferring the Service Tag to the whole plane accommodation of the second level, as described above.Stamp and fend line;
- Take the main profile and cut it to the size of the height of the second level.Inserts an element into the guide launch, do mount with screws.
- UD cut the profile to the desired size.This can be done by scissors or metal grinder with a cutting wheel.Fasten elements to the wall;
- frame set in the main ceiling profile and make one-piece construction;
- Concludes wires and sheathes frame as the first embodiment.
Installation tape lighting
Once we have fully secured the ceiling and the place of installation of the tape.And all the wires to connect withdrawn, we can start to connect.
Just before that we should say the following: determines the power of the tape. After selecting the ribbon should be properly identified and its capacity.
Without this indicator, we can not choose the right power supply:
- to measure niche for installing the tape and determine its perimeter.Then we multiply the area of one meter ribbon capacity.
and see what is the minimum capacity must be at the power supply.Let us add to this figure to 15% and get what we should buy.
We determined the power supply, but there are still a few points that should be considered.So
- Do not connect in series.Because each subsequent tape will be slightly dimmer lights of the previous;
- When more power is the power supply and increase its size.This should be taken into account in the design rim for fastening lights.Or you have to install the power supply on each tape.
We give connection rules by doing that you do not encounter problems during operation:
- Ribbon Cutting must be carried out only at designated places;
- Bond few strips tape is performed only by means of special connectors LED.To be safe, better to produce a spike tape etc. a soldering iron;
- power supply is required to take a power reserve;
- fasteners on the metal areas should be carried out only with the insulation;
- Unplug the power supply during the conduct of operations;
- One wire from the power supply is connected to the LED strip, and the second at 220 W;
- RGB-ribbon connection is performed only by the controller, it does not forget to save polarity.Red wire will determine plus black and blue point to minus.
observe connection sequence;
- Before installing sure to test the tape and only then attach it.
Note: If you use a long tape, then connect in series the voltage at the end of the site will always fall.At the site of the order of five meters is much safer to make the connection in parallel, and it is made using wires with a cross section of 1.5 mm.
applied in this embodiment, a powerful power supply or use two, if it is a smaller volume.
So connects Ceiling lighting for the bedroom.On this subject a lot of photos and videos in the internet.
material price is not so high.The main use quality materials and lights will be pleasing to the eye for a long time.
Just on our website you can find out about other types of plasterboard ceilings.