plasterboard with their hands in the kitchen many do.This material has long been used in the construction.
main thing here to choose the right design, as you can read in detail on our website.It all depends on the area of space and lighting.
But how to make high quality plasterboard ceilings in the kitchen, we consider in detail in this article.
the kitchen ceiling plasterboard can be installed without any problems.But this requires preparation.
Prepare reference plane
We should first prepare a base ceiling.Although in this embodiment, manufacturing is not that difficult to do, it will be necessary to remove all the irregularities are too big.So
- Clear the reference plane from the wallpaper or washed off the whitewash (see: How do wash whitewash from the ceiling with the least effort) and see what we have under coverage.If a lot of cracks and plaster swelled, then these places should be cleaned of material that flaked off, and putty;
- When surface damage by fungus, also should undertake treatment.To do this, there are many materials in the retail trade.
Warning: If there is a fungus affected areas, be sure to get rid of this disease.Do not think that everything will be closed for the kitchen ceiling plasterboard.
this disease that will spread and damage healthy parts.Moreover, the arguments are harmful to human health.
- also for further work is necessary to determine the shape and coverage.This will determine the number of the desired material.
Never take his butt.You should always provide at least about 15 percent of the waste;
- Pick the desired sheets.If you have high humidity in the room, then plasterboard ceilings in the kitchen should be made of moisture-resistant material.He
last longer.If the room humidity is in the normal range, then you can use and lightweight materials that reduce the weight of the entire structure.
this theme we have devoted an entire article, which fully addressed all types of the product and recommendations for its use;
Note: Pre-bought sheets of drywall, put them in a room where the work will be carried out.Material must dial the desired humidity and temperature.
folded sheets are stacked on top can put the load.We need to work flat material.
to work, we need a tool that is perhaps found in any household.If something not to be missed, you should purchase.So
- Cut sheets will have to be on a level plane for this approach, and the kitchen table ;
- Prepare a flat rail and a sharp knife;
- To trim profile and fabrication of channels in the surface of the wiring needed to Bulgarian communities;
- sure to get the hydraulic level.Or make yourself;
- Ceilings plasterboard cuisine can be done using a variety of shapes and radii.You will need a hacksaw and a needle roller;
- have to do and the right edge of the sheet geometry, chamfer on the elements for that perfect plane;
- plasterboard ceilings kitchen require regular geometric shape, for this we need a builder's level and Nylon thread.
After preparing the necessary tools and materials you can get to work.
Note: If you choose to use as a framework is not a metal corner and a tree.To do this, the most optimal material will beam with a cross section 50/50.
should buy it in advance.Take the material with moisture content up to 12 percent.Before installing
treat with antiseptics.This will prevent the formation of mold and mildew.
installation principle is exactly the same frame and with bar and profile (sm.Karkas ceiling plasterboard - all the little things or little things do not happen.).
Plasterboard ceilings in the kitchen attached to the frame .From which it depends entirely on the correct geometry of the structure and appearance.
Therefore they are related with the responsibility for this work.This will be the base on which are mounted all the elements.
plane must be flat and solid.
- plasterboard ceiling in the kitchen should be located on the same plane.If this is not done, then the whole structure is violated.
To do this we need to start to find the lowest corner of the room.Stamp.Was added to the height of the profile or timber (it all depends on what you choose), we put a mark;
- Now we have the level at which should be the ceiling.Further, by hydraulic transport level on the size of the other walls.With this tool you can do it quickly and most importantly accurately;
- Now select Nylon thread and use it, connect the marked points.Just repel level.
we've got a solid line, which will be held on the ceiling.
Warning :.When selecting the height of the ceiling, be sure to note the sound insulation layer (if you decide to install it of course).The fact that these elements can not be pressed sheets of plasterboard, otherwise they lose their properties.
This material should be placed firmly, but at the same time, it should not be pressed.
Fixing profile or timber
ceilings in the kitchen of plasterboard will be attached to the frame, to which the material can serve as metal and wood.In principle, their attachment is no different.
Now we look at how to do it properly and this will help to photos and videos.
- to measure the distance to the wall and cut the profile UD.This is done using the grinder with cutting wheel or tin snips;
- to conduct line makes attaching the cut profile.For wooden walls is enough to make the connection with screws.
for concrete plane need to use the hammer. necessary to make holes in the wall and profile.
only do their best to collect.Then we will be a good anchor;
Warning;Do not buy the dowels with screws included.Get pacifiers and pick them screw with a diameter of a couple of mm larger than the cross section of dowel holes.This ensures reliable and strong connection.
- makes attaching strictly on the line.The fact that the profile can be bent.Therefore, the line of fasteners should be kept accurately;
- Now we need to make a layout, which will be fixed rail guides.Focus on the step of 1200 mm.
question that at this distance takes the middle of the sheet.If you do not use the standard material, then the size should be correct;
- cutting member in the appropriate size and fasten the line.This is done as described earlier;
Note: There is one important issue.The edges of the sheets should be attached in the middle of the profile.Therefore
properly mark and install.It is not allowed to perform the connection weight.
- makes attaching the guide profile to the contour of the frame, which is already around the perimeter of the room.Is trimmed elements in the desired size.
Do not forget that it is not necessary to cut the butt, it is necessary to provide a gap of about 5 mm.When this gap you avoid problems during expansion of the material, which can be at a differential temperature;
- Now do the layout for installing hangers and fasten them.This is done by means of screws and the distance between the elements is used about 75 cm;
- Further suspensions insert rails and fix them.This is done by metal screws.The connection is made at two points.
this we will avoid the possibility of backlash elements;
- the kitchen ceiling plasterboard with their hands should be done in one plane and is performed using suspensions.Which can carry out the adjustment elements in height.
This is done by bending the so-called "ears", after which it is fixing with screws;
- When installing transverse profile, the distance should be about 40-cm, fixing with a longitudinal gap between the elements of about 60 cm;
- Now we need to check horizontal mounting plane.To do this, the line between extreme stretch the profile.
Better to do it on both diagonals.Then you can better see the error of placement;
- adjustments to the installation elements.Do not allow slack;
- compound of the guide is performed using the crab that impart additional rigidity.You can use them and lengthen elements.
improve the quality of the connection can be another way.In this embodiment, it is necessary to use two profiles which are connected with the guide.
Fixing is done at two points on the metal screws.This can be avoided backlash parts of the ceiling;
Warning: plasterboard ceiling in the kitchen can be done efficiently, only a perfectly flat surface.Therefore it is necessary after the installation of the frame again to check the surface of the fishing line taut.
If you do not perform, will be carried out when the panel.This has to do not succeed.So initially make all qualitatively.
After full consolidation framework should be to partition and install the hardware for installation of lighting.So
- To get started is to turn off the light on the line and not to tempt fate;
- Make the marks on the basis of the ceiling and put a mark where the lights will be placed;
- After that, we have to pick a place to install the junction box.Here, the connection will be made all along the line.Choose the section where you want to access in the event of breakage;
Warning: If you decide to make the lighting of 12 watts.Then it's time to think about it.
I'll pick up an additional space for the transformer down.To it must be easily accessible.
- After selection of these points make the channels through which the wire will approach .;
- Place the wire in the corrugated and attached according to the layout;
Warning: Avoid twists, use a stationary terminal blocks.They provide a sturdy and effective compound.Choose
wire for wire cross-section of the pre-pick it up according to the number of lighting fixtures.Make a stock upward.
Perform quality work.Improper wiring will later be quite difficult to get to the place of issue.
- Fasten the wire to the base of the ceiling;
- at the location of fixtures do release the wire.Its length should be 10 cm longer be obnizheniya ceiling.
This will connect high quality lighting fixtures;
- Connecting the lighting and look correct light distribution.While all can alter.
After installing the sheets will not be possible to perform mounting .So think through everything in advance;
- If done correctly, you can turn off the power and do the work on;
- Note and base mounting fixtures.Their length may depend on the height of the ceiling.Decide this advance;
- Now it's time to install the insulation, it is one of those who decided to do it.
Then the ceiling in the kitchen with his hands Plasterboard should be equipped with sheets of material.For this purpose it is necessary to do everything right.
and take into account the nuances of the following setup:
- Gypsum ceiling in the kitchen should be installed on the angle, which is the part of the window.It will be the most comfortable setting plane can be seen;
- Screws are chosen according to the thickness of the material.Their installation is done vertically to the material.
If the item has not gone well, it should not be fastened in the same place, back a couple of cm and make the connection again.The distance between the mounting points should be at least 15 cm.
Installation should pay attention to fit the profile sheet, it should be of high quality.Not allowed deflections material.
If necessary, make a connection, and three centimeters;
- Do not make the installation of the sheet against a wall.It is necessary to provide a gap about 5 mm;
- Metakhim The lighting installation is done as follows.To start putting a fastening element to the base and mark the exit point of the wire.
Remove the sheet, and make cuts under the lamp.The best thing to do with a special attachment on a drill.
It can be of different sizes, and to find the right size is not difficult.You make a hole and then you can make the connection as described earlier;
- to the ceiling in the kitchen after the installation of drywall can be properly putty and process (see: How do putty plasterboard - correctly and efficiently ) , between the sheets is to provide a gap of 5 mm.This stitch will be processed, which will keep the coating quality.
- Just before laying it is necessary to chamfer the front part of the plate about 5 mm .;
- cutting material do as follows.The sheet rests on a flat surface.
Held cutting line with a long ruler and a pencil.In this trait should make an incision that is performed with the help of smooth bar and a sharp knife.
Thereafter, the sheet is displaced from the edge of the surface for a few mm.Lies bar on the cut line.
pressed down and executed by pressing a sharp kink.After that you should trim the plane of the fracture plane and about the means of chamfer;
- plasterboard ceilings in the kitchen can be made with different shapes and radii.This you can read in detail on our website.
That made plasterboard into the kitchen.Now we have to give it a finished look.
This can be done with putty and then paint.But for this there is a separate article, which provides complete instructions for the job.Price
material to work with, and not as high, but we must do everything efficiently.Transform that either will be difficult.
so be patient and fold the drywall on the ceiling in the kitchen with high quality and beautiful.
Just on our website you can learn about how to make curly ceilings.