Cekonomit on building materials and pay workers enable independent performance of the repairs.For example, most people afford their own hands to build gispokartona ceilings in the kitchen.
sequence of surface preparation and mounting plates
Recent trends in the design space apartments are in the design of the entire space in the same style. Accordingly, repairs easier to carry out at once in all the rooms, hallway and kitchen.Extensive work
allow more efficient use of materials, but the one-time costs will be significant.
Step by step guide will help set a flat or multi-level ceiling of the kitchen giposkartona (sm.Mnogourovnevye plasterboard ceilings do correctly).
to perform the work needed support to keep the raised sheets at the desired level, and standard tool:
- line, length not less than the length of the sheets;
- Subtle Knife;
- Building cord;
- Shears for metal.
Council.It is necessary to draw a paper on options that will look like in the kitchen ceiling plasterboard renovated, it will fine-cutting plan that reduces waste.
- First of all, like any other repairs, installation of the ceiling calls for a clear understanding of the desired result.We need to do a drawing (lines leading plasterboard ceilings - what is needed).
should be designed such aspects as the number of layers and materials that will be used for decoration.
- Next is preparing the walls and the ceiling surface of the installation frame.It is important to remove all of the coating layer, such as old plaster or paint.
also need to ensure that the joints on the surface did not have extra layers, corners must remain straight.
- If remove rounding joints is not possible for the kitchen ceiling plasterboard can be set below.
- Location framework under the plasterboard ceiling for the kitchen, you must first map out using vertical hangers.
- frame made of metal profiles.All levels of the frame constructed immediately.
After the frame under the ceiling giposkartonnye kitchen installed, electrical wiring is done.Care should be taken so that the wires are not touching metal.If
will be installed in the ceiling point light sources, produce wiring to each of them.
- All wires should protect and secure the plastic flexi hose clamps on the carrier surface of the ceiling.
Further frame is attached a layer of drywall sheets for the first level.Typically, oil paint Ceiling in the kitchen operate in several layers for each level.
perform installation of gypsum material to the next level of the framework.It usually has a shaped form that is pre-chart sheets.
Similar work is done with all the subsequent levels.
- next step plasterboard ceilings in the kitchen trim putty to cover all joints and screw heads.
- The plasterboard for the kitchen are connected and installed lighting.
mounting on the peeled surface of the walls and ceiling.To mark the position on the frame under the kitchen ceiling plasterboard is necessary to find the most protruding point on it.
step back from this level of at least 2.5 cm and put a note on any of the walls:
- According to him, using the point of the level outlined in the remaining walls.Further fighting off line position of the future ceiling.
- Around the perimeter of the kitchen at this level are set CD profiles.This is done in such a way that they provided at the lower part of the planned line.
- segment separating the plugs is not more than half a meter.The paper recommended that you use the size of 0.6 cm dowels and screws length of 5-7 cm.
Buy hardware better not complete, but separately.
plasterboard kitchen relies mainly on profiles, so they need to do the layout very carefully.The room is the most directly facing the wall and from the steps of half a meter counting is done at a given level.
intermediate labels are kicking the guide to install the P-like hangers-mounts for CD profiles, also called peshkami.
- Peshki installed on the dowels.It is worth noting that it is better to buy plugs that are flaring, as they will not sink into the concrete slabs for the installation.
In some cases, kitchen plasterboard mounted on the frame construction according to cell type.The cell size of 0.6 m.
This kind of skeletons has no special advantages over conventional, with profiles directed to one side and located at a distance of 0.5 m. At the same time, its construction requires more thanwith a conventional frame, time and energy investment.
Based on these facts, this manual does not contain instructions for the production of the cellular skeleton.
Before attaching the CD profiles need to adjust to the desired size. Then they are installed in sections UD.
Using PN, CD profiles are pulled into position above the plane of the frame to stretch the thread under them.It can be as caproic and silk.
thread held across the CD profiles and fastened with small screws to the UD profiles.
Tip: Consistently one of the CD set of thread profiles, and bolted to the suspension of the PN.The ceiling in the kitchen of plasterboard is fixed only after all the profiles will be securely locked.
How to mount plasterboard
After the final frame of the mount to the ceiling drywall in the kitchen and holding electrical wires comes the stage of attachment of gypsum board (drywall see: How do the best for the ceiling or wall).This work is quite simple, but requires an assistant to safely lift the sheets of material to the desired height.
second worker also needs to work on the joins are sheets.It should fall strictly on the center line profile, which allows it to serve the suspension subsequent sheet.
Each gypsum board used about 60-70 screws for metal with a length of 25 mm.When screwing the need to pay attention to the depth of utopaniya hats in the leaf surface.
is important to make the screw deeper into the list, but does not deal damage to the paper.So
- When mount gypsum boards need to remember that they will be installed lighting.It is recommended to find out in advance their size.
If it is not possible for any reason, at their locations left holes made in the usual drill, through which lead out wires.
- For the safety of gypsum boards, use special nozzles for a given material or regulators for the screwdriver.
advantages.As mentioned earlier, kitchen plasterboard ceilings allow to build multi-level structure.
- To understand the principle of setting the next level will be considered the simplest version of the design.It does not need fixing to wall hangers, as the second level will be mounted directly on the drywall.
- The illustration photo shows a curved UV profile with a width of 7.5 cm. Its side surfaces are cut in steps of 5 cm, which allows you to make it flexible.
- On the surface level of the first pencil marks the contours of the second level.On this circuit will be the installation of flexible UV profile.
When mounting use screws of the same type as in previous works, that is the size of 25 mm.
- to the wall at the desired level priverchivayut UD profiles.Next, set the jumpers.
If their size is more than half, in their mid-mounted suspension.
- bolted to the bottom plane of the sheet of oil paint, then it is possible to make the conceived form. superfluous parts are cut along the contours of the curved UV profile.
Next to this profile is attached a vertical stripe.
- from the whole leaf is cut to the required width of the strip.Then the paper is applied to the cuts in increments of 5 cm. From the side where the convex bend.This allows the band to repeat the bend.
- produce similar levels of work followed.It is important to understand well the aspect ratio of the new ceiling height of the room.
- Further work is performed with holding lighting technology, as well as putty and painted the ceiling of plasterboard.
Tip: Joints recommended to treat the surfaces fugenfyullerom, it will give them rigidity.
In the above example, we can see that plasterboard is quite possible to do it yourself.It is important that the cost of such works is different from the cost of the construction crews work at times.Data
knowledge will be enough to repair the ceiling in the kitchen.For the construction of a more intricate designs, is available with pre-themed video.