Siding, it is quite durable and practical material, which has taken a worthy place in the market of finishing materials.It has found its application in the decoration of houses, you can make a ceiling, siding much where applicable.
But this article will explain how to hem ceiling siding and how to fix the siding on potolok.Prakticheski any work can be done by hand, the video can be found, but it is better to have a step by step instructions.
be aware of siding
This element construction can be used as decoration in the exterior of the house, and for lining inside.The main thing to understand what kind it is more suitable for your room to be properly applied.
All types of materials can be divided into manufacturing .As ceiling siding can use any kind of material.
should be just right to pick it up.
It all depends on the installation location:
- Ground , can be used not only for exterior use, but also serves as a lining inside. With its purchase should pay attention to the thickness of the entire length of the elements, it should not be changed.
This material finish is rather pleasant appearance, which is carried out under the stone cladding.Quite resistant to environmental influences.
- Cement , which is based on cellulose fibers and the addition of cement.Has, as a rule, embossed with different patterns.
for cladding buildings used little.The main disadvantage is its great weight, which affects the load on the foundation.
also has a high cost and complex installation.But it also has dignity, it is not subject to burning;
- Vinyl , which is often used for cladding of the house.At its heart are two vinyl panels.External protection against external impacts, while the interior panel does not change the geometric parameters.
outer layer can be textured and have a smooth surface.By the advantages are greater resistance to external influences, it is not subject to burning and corrosion.
requires no more maintenance, has a high breathability.The design has holes for drainage of condensate;
- Wooden , produced as a result of pressing at high temperature fibers and wood-based resins.After the appearance on the market of vinyl structure at this time is almost never used.
unquestionable dignity, it is the similarity of the tree.But there are drawbacks, it is a high flammability and requires constant care;
- Aluminum , found its application for the lining of industrial and warehouse space.It is a refractory material, and does not rot.
requires minimal maintenance and high price of production determined his democratic price.But there is a significant disadvantage, has a relatively low impact resistance;
- Steel , is used for cladding of industrial buildings, workshops and warehouses.Not susceptible to burning and possibly the formation of rot.
But this design has some disadvantages: It has a large mass, which considerably increases the load on the foundation.It has a high cost.
subject to corrosion and rot.
As we said earlier, the siding to the ceiling, you can choose any.But perhaps the most appropriate option is vinyl.
now must figure out how to sheathe siding ceiling.Video on this topic can be found in the internet, and now will be explained in detail how to put siding on the ceiling
Determine the amount
Please note a few practical tips on making the design, they will help to make the right choice:
- Atlow ceiling, it is better to give preference to lighter tones.At high on the contrary;(See. The ceiling height in the Khrushchev and stalinka)
- Choose a color for the ceiling elements of two or three shades lighter than the walls;
- ceiling most used material with a width of 25 cm and diamonds, and the length of 3 meters;
- When fastening elements of vinyl, you will need to purchase a bar area and, its amount depends on the area of construction.Finishing siding ceiling is not possible without the presence of these materials;
- siding installation on the ceiling is carried out on wood slats that prior to installation should be treated with antiseptics, rules for their application are described in the instructions.This protects the elements from decay and the emergence Shashel;
- extend the life of the whole structure;
- making the ceiling in the kitchen of the siding, always remember the installation of lighting.It should be determined in advance and make a layout.
for different elements, integrated lamp, mortise or overhead chandeliers, the system should provide a variety of fasteners and make a purchase in advance.
Before starting work with their hands need to make a design drawing (See. Drawings and ceilings).Thanks to him, you can define the desired number of items and accessories.
can correctly determine the amount of lighting that should be purchased in advance:
- siding is necessary to purchase a ceiling, the amount of which you can easily determine in accordance with the drawing;
- ceilings of siding are fastened by means of brackets, which must be purchased together with the material;
- Acquire and process timber before placing it in advance preservatives, it has to soak up liquid and dry;
- When purchasing materials and components do not get all butt.Correctly calculated, should be done taking into account the purchase of waste;Get
- lighting system and mounting them.
- For proper markup you need to buy or make a hydraulic level.Buy a rubber hose with a long diagonal space of one meter.
Obtain two glass tubes at the drugstore that they plugged into the hose.Put them both ways.Level ready.
Stucco siding is made on a wooden frame, which should be installed on the entire plane. To him be fixed elements, it must be done efficiently and firmly.
Note: When installing the frame, always use a scaffold, with which to determine the level of mounting bars.It is necessary to make metering extreme strips.Then they will see all the flaws in the plane..
- Performing frame begins with the markup.First you need to find the lowest corner of the room.
added to the thickness of the largest timber, the thickness of the material and set the mark;
- We transfer this size on the other wall, and also note the installation level with a pencil.Apply for proper marking hydraulic level.
After this repulse a line around the perimeter of the room, use nylon thread.So get high-quality performance of the markup;
- Finish ceiling siding goes on.According to the marked line fastened timber.
With wooden ceiling mount can be carried out using self-tapping screws. When the concrete surface must be secured using wood dowels.
for their installation it is necessary to make holes in concrete with the help of punch;
Warning: Some advise to do the installation with nails.Do not do this.In the course of time under the weight of the ceiling, the nails become loose.
Price screws slightly above the nail.But it will allow to attach the material quality.
- finishing siding ceiling is so exercised, mounting elements are mounted on rails which are arranged perpendicular to the axis of the elements.Therefore is the direction of the installation details and then make the frame.For this
slats nailed to the ceiling.The connection is performed as described ranee.Rasstoyanie between elements should not exceed 50 cm;
Warning: When attaching particular attention to the installation angle.There should be an ideal docking elements.
For this to be done qualitatively base for installation.
How to put a ceiling on the siding, will be discussed below.Before that, the wiring should be done to connect the lighting.So
- mark places where lamps are doing in this area for the laying of the cable channels.Install wiring and fasten the wire.
at the location of lighting fixtures do release the wire.This is done with a stock;
- When fastening material should first make a mark, where it will be mounted lighting component. After that the band tried on the siding and at this point put a note.
Then cut a hole of the desired diameter.Masters are advised to do so by using a heated knife.
In the knockout holes will have to let the wires, which are attached lighting.
When we made the frame and is supplied with power, and can be mounted facing:
- laying siding on the ceiling and begins around the perimeter of the installation attach Area, which will be fixed elements.It is better to use screws with a big hat.
Some do it by means of staples and construction staples.Only such a fixation is not sufficiently reliable.
When screwing screws to properly do the perpendicular mounting.If the item is set at an angle, his hat would interfere with the mounting of the structure, this should not be allowed;
- take measurements of the ceiling from the beginning;
- Cut the desired length of the runway edge and plants in the area, which is fixed on the perimeter of the room. perform mount to the frame with screws;
- Now again and again stopped doing the cutting member and fasten it.In the course of the installation fasten lamps, as described above.
It should be sealed the entire plane ceiling.
Note: When laying the material, note one detail, the last panel will be cropped, not only in length but also in width.Before installation, carefully Gaugeable diagonal space.
last panel should not be cut at an angle, and in a straight line.The first element can be a little shift, the gap will cover skirting after work.
We are told how to put siding on the ceiling, everyone can do it with your hands.Installation of such a construction is also possible in the living room, and bathroom.
Now you know how to make this work.Most importantly, take the technology and design will serve you for years to come.