Currently, interior design involves many different functional and decorative elements.Their presence, location, number and composition depends on the look of the room, and how the picture is perceived as a whole.
So, you can buy expensive, designer accessories and hang them on the wall, next to the cheap, Moldovan carpet.Elements of high-tech, are not in harmony with the style Pin-up girl posters.
And indoors, natural materials, plastic is not the place.According to the design of this room should be approached very, very seriously.
Many, of course depends on the proper illumination.Lighting can be zoned space, accents, highlighting the main elements.or vice versa, hidden, adjustable lighting obscure recreation area, to create comfort and an intimate atmosphere.
You can create an entire composition of light, making it one of the main parts in the design of the room.This is certainly not cheap, but for that very beautiful.
Features luminaires for suspended ceilin
important role in creating the right lighting fixtures for playing built-in ceilings.In principle, they are similar to the conventional ceiling lights, but are specifically designed for ceilings.
and there are significant structural differences:
- used lamp low power - no more than 50 watts for incandescent and halogen no more than 30.
- Housing should not be heated, otherwise it will be deformed web of film.
- lamps are mounted to the base of the ceiling, on the very fabric of PVC they are not hung.
- Recessed luminaire for suspended ceilings thinner than usual.
- lamps do not create zasvetpodpotolchnoy area.
It is these differences and impose special requirements for the production of recessed luminaires for ceilings.
How to mount recessed luminaire for suspended ceilings
So, we understand that the mounting fixtures in the suspended ceiling, has its own characteristics.Here are detailed instructions on how to do it right.
Tools and materials:
- Impact Drill.
- Plugs quick installation.
- Mounting knife.
- Downlights for suspended ceilings.
- The front lamp.
- Reinforcing ring for PVC film.It also termokoltso.
- Before you pull the fabric PVC film on the basic ceiling should be strengthened rack fixtures.
- Once you have fixed rack or take the laser plummet and move the center rack to the floor.In the future it will help to find a rack on the ceiling.
- After installing the web find the marks on the floor center racks, palpated for their accuracy and sticking to cyanoacrylate reinforcing ring.
- Only then cut out with a knife mounting hole.The hole should be slightly larger in diameter than the light.
PVC film and luminaire housing must not touch
- As if we did not try to fit into a single rack level with the ceiling, this is not easy to achieve, through this hole can adjust the rack.Depending on the manufacturer, this is done either podtyazhnymi screws or bending the legs, and there are also stands that are going from a universal socket, which is cut at all kinds of lamps and mounted on drywall hangers, which are also podgibayutsya.This is clearly seen in the photo well.
- flying leads, a terminal board attached to it, connect the wire lamp and snap it into the rack.
- All your lamp is ready for operation.
Of course, we understand that all wires and racks of lamps shall be carried out and installed before the installation of PVC film. do it after the installation is not possible.
Racks can be made to the suspension, and drywall and rings cut from plastic or plywood or OSB, but in this case the ring must be thoroughly processed sandpaper, so zauseny not pierced the ceiling in the future.
Termokoltso same diameter can be cut from plastic.
Tip!It should be remembered that all work with the stretch ceiling must be carried out very carefully.In no case do not place the rack or having any defects in the form of sharp edges or burrs.If you do not mount the lamp counter to the factory, and on gypsum suspension are bent all the corners of the ceiling inside the rake.
Screws also have to look only inside - to the main ceiling.Even the smallest hole will be stretched over time into a huge hole.
Which lamp is best to use
Of course, this article would not be complete if we did not say a couple of words about which lamps are built into the ceiling lights for false ceilings.
Types of lamps:
- Halogen lamps - their light spectrum very close to the sun.It gives a bright, white light.
best to use halogen lamps 12 V, but for their work is needed transformers.It must be set so as to have access to it without dismantling the film as transformers often break down.
not use halogen bulbs over 25 watts.Can give podpotolochnye flashes on the region because of the peculiarities of the cap.
- Incandescent - good light, but give the lit and emit a lot of heat.For something cheap.But if you decide to use the bulb - Make sure to connect them through a dimmer switch - a device for adjusting the brightness of the lamps.
- saving lamps - good solution for stretch ceiling, as isolated little heat and consume little power.
- Svetoidnye lamp - the perfect solution.Do not give light up because they have a closed base with reflector outward.It consumes very little power, even less than the cost of the lamp.
Virtually Crafted heat.But it is not cheap.
Now, having an array of all the information in this issue, you can easily install their own hands spotlights in the suspended ceiling.As you can see, it is not very difficult and quite able handyman with straight arms.