Many people want to equip the room an original and at the same time hide the error base coat ceiling.There are many materials for decoration, mirrored ceilings, this is an option that meets the parameters of such a choice.
This will be discussed further.Articles on this topic in the internet a lot, you can view photos and videos, and select the desired design.You can perform the work with their hands, which will reduce the cost of the assembly.
Types of suspended ceilings mirrored
There are several types of materials that have been successfully used for finishing:
- Whole mirror to use in the decoration of the ceiling is almost impossible, so does the individual elements and then fastened.They may be different in form.After installing the mirror surface is obtained, which is slightly separated seams;
- more budget option trim panels are plastic mirror.They are carried out on the basis of polystyrene, the front part of the film is finished with a special type of mirror.The elements may be different in form.This material is flexible, allowing quality to decorate the ceiling curved elements;
- mirrored ceiling rack, has earned its popularity due to the ease of installation (sm.Plastikovy rack ceiling - installation of their own hands) and easy care.This rack is made of aluminum.This design has a fairly strict views;
- Hanging mirrored ceiling on the basis of PVC film.It clearly reflects the light of its mirrored surface.Of course, such a design is incomparable with the mirror, but it has a definite plus.It can be installed not completely leveling the surface of the base ceiling.such material is environmentally safe and does not have much weight.This film is sufficiently strong and it can easily be replaced.
advantages and disadvantages mirrored ceiling rack
If you advise from experts, a mirrored ceiling supply, while more than half are prompted to install rack and pinions design.This material has many advantages.
- Perhaps the biggest advantage will be the preparation of the base ceiling.If the mounting plate is required ideal surface, in this arrangement it is not so important.Although if it is too big swings plane if it is eliminated;
- Ustanovkakonstruktsii can significantly increase the space by visual inspection;
- When installing the ceiling, you can hide all the irregularities and errors in the reference plane .If you apply when installing aluminum plates interspersed with metal cassettes, then this design and will have natural ventilation;
- is possible to use when installing recessed lighting.This will help a great light reflectance, which is regularly distributed streams of light;
- This waterproof item, which is not afraid of high humidity;
- Suspended ceiling mirror can be repaired perfectly, just have the ability to replace any element, and it will not take much time.
If you look better, then you can find some disadvantages:
- Requires though not time-consuming, but constant care.After all, the mirror surface can be seen the slightest stain;
- Installation takes a part of the usable area
material price can be quite different.There is a complete low cost, but there are also quite expensive.If you have decided to do just such a ceiling, for installation instructions will be given below.
Rack mirrored ceiling
This ceiling is popular to the public.Its very easy to install yourself (see: How do properly install mirrored ceilings made of plastic).This material is supplied in strips and then it is cut along the length of 3-4 meters.But you can order the size and the individual, according to the specific plane.
There is also a choice of element in width, it ranges from 9 to 20 and sm.Poetomu have the opportunity to choose the right elements and the width of the attachment, which will reduce consumption and therefore costs (reduced material consumption).
material can pick up and thickness.
most practical 0.5 mm:
- Such elements are well keep their shape and are not formed dents;
- Conveniently mount, rack does not bend during installation.Damaged parts perfectly amenable to replacement.
If you apply more subtle elements, then mash them easily during installation, and it will greatly noticeable on the mirror surface.
choose the form of rail
There are three kinds of form elements.
That there are three types:
- discoveries that have clearance when mounting.Such elements are suited to larger premises, but it will look bad in a small bath;
- But you can do quite elegant and unique plane;
- closed, in which fixation is performed in a joint.On the principle of a conventional lining;
- with inserts, this species is very similar to the first option, but all joints are covered with strips of aluminum.
Note: When buying slats mirror, pay attention to the front part.Chrome mirror coating quality materials are always covered with a film that protects the surface.This ensures safety during transport.All quality materials only and are processed.
Installation mirrored aluminum ceiling
Perform installation can be their own hands, than significantly reduced the cost of the construction.And the total price will be lower.
Warning: do the work very carefully, if damaged the front of the spoil the look of the entire plane.The film should be removed only after mounting
Just worth mentioning that in the scope of the ceiling and includes the following elements, which are required to check when making a purchase.
- bus, it is a common plate with teeth.To it are fixed slats.When buying also see a connection to the rack.There are several versions of these items and can not be a coincidence.Check necessarily, a manufacturer may have to mix elements and change them;
- suspension, which also included.This wire, which is attached to the ceiling.With him is the connection rods and tires.It is for this reason that such a ceiling is called a suspension.The suspension can be adjusted and the height of the ceiling.When attaching is possible to provide additional insulation and ceiling.Just make it worthwhile to purchase the material ;;
- plinth, is a decorative element that is used for decoration.It helps to hide the gap between the ceiling and the ceiling, which is better to calculate in advance.Similarly, you can not do it, but some can be deducted.
Warning: Immediately purchase and fixtures.Note the width of the rack and the diameter of the lighting device.They should be approached.
can not buy a lamp with a base width of its fastening and wide slats.Make allowance upwards by about 10 cm Th.
- Just swipe marking and fixing the level of the ceiling.To do this, locate the lowest corner of the room.Add to it the thickness of insulation and cladding elements.If the heater is not used, then instead take a height of hangers and put a mark on the wall;
- Then this mark should be moved to other walls.To do this, apply the hydraulic level;
- After that, all you want to connect the marked points.This will help monofilament thread.With which you can fight off a straight line.
- to start doing the whole layout of the reference plane.Note the attachment points of hangers.Correctly calculate the beginning of fasteners .. For this purpose it is necessary to check the premises and determine the diagonal sootnost plane.The last element usually does not become full and it needs to prune.This error can hide and plinth.That is exactly what should be considered when purchasing material.Then we do the wiring for fixtures.
1. Find a point of connection for the wires.And at this point should be to mount a junction box.Which will protect the wire from moisture.If it does not perform a moist environment penetrates into the compound, and may cause short-circuiting.
2. All fixing the wires are not performed with the help of twists and stationary use fasteners.They will provide the connection and does not allow moisture to penetrate.
- Fasten the wire to the ceiling and at the points where lamps produce its desired length.Never do it back to back, always make tolerance towards increasing about 15 percent;
- makes attaching strongerov this carrier profile.The connection is made using a dowel and screw;
- fastened along the perimeter of the end profile.It is not a difficult job. The most important thing before performing the installation layout plane fasteners. To do this, apply the hydraulic level;
- for wood surface mount is performed by means of simple screws.If you have a concrete cover, then make a hole using punch and apply dowels;
- then applying and fixed slats.When installing the placements do the opening fixtures of the desired diameter;
- Fasten rails to stringers;
- Now the crucial moment.You can remove the protective film.
The ceiling is ready.If the surface is damaged afterwards, it is possible to simply remove and replace the deformed element.With proper use, the design will serve you for years to come.