There are many types of ceilings.Sometimes it is difficult to stop a choice on what else.
In this article we consider cluster mirrored ceilings Let us give the characteristics of this design.
you can view photos and video, it will help make the right choice.But to do that is to know about the design as much as possible.
Benefits mirrored ceiling cassette
There are many reasons to install a ceiling.But he can not always come up.
Let's look at the points where it is used:
- This design is perfect for the room where the ceiling is not smooth.When fixing them will not have to dub and cover.That is, the preparation of the reference plane is reduced to a small operation;
- in a room with low ceilings before installing worth several times to think before making a decision, because the installation will take away useful space.But there is a reverse side of the model.You can
gap between the reference plane to do the minimum, but the mirror coating will increase thevisual plane;
- is possible to carry out thermal insulation and sound insulation plane .This will be in addition to the main job.
the layer you choose to do, because the level of the ceiling determined by the owner;
- Cassette ceiling mirror is resistant to temperature changes and can be installed in areas with no permanent heating.Just fine moves moisture, and can be mounted in the bathroom;
- materials are made of eco-friendly products that are not harmful to human health;
- This design has a high durability.And the owner will serve for many years;
- On the mirror coating (sm.Delaem own mirror on the ceiling) does not accumulate static electricity.The surface itself does not contribute to the accumulation of soot and dust;
- not complicated care.It can be carried out using a wet and non-abrasive detergent;
- All work can be done with their own hands and without the need for outside help.That will significantly reduce the cost of the work;
- The advantages include the repair and that simply is performed.If damaged element can be simply removed and replaced when it is not necessary to make replacement of the entire plane;
- Installation of almost all kinds of lighting.
Note: There are certain lack, which is expressed in careful handling elements.The mirror surface is applied on almost any element.Typically, this is a thin layer deposition is therefore to work with gloves and carefully.Do not push on the mirror surface.
Installation SLR coffered ceiling
As the snake and said, this work can fully implement their own hands.The truth is you have to help the family, to support elements in the reduction of attachment.
All work is done in a certain order.It is patience and attention.All should be done accurately.
Materials and tools
Each work requires training and this is no exception.
you need a tool that should be prepared in advance, so as not to be distracted during the conduct of work:
- For the proper installation of all elements of the framework and the plane you need to level the building with a long of not less than one meter.And the square;
- to correct the installation frame is required to purchase or make a hydraulic level;
- to hit the level you need monofilament thread.To determine the plane of mounting panels can not do without the use of fishing line;
- need for cutting hacksaw with fine teeth.Cut the profile help tin snips;
- holes need to perform a drill and hammer drill;
- make the right measurements and calculate the quantity of material.To this should be taken into account, and the amount of waste.
first measure the area of the room and divide it by the square of one plate (it is listed on the packaging).Thereafter Calculate the number of items that need to be cut, and only then you get the correct figure;
- Get suspension systems.Be sure to take the details of the manufacturer thereof and with one form.The fact that the components from different manufacturers can not dock .;
- immediately identified and the type of lighting.Purchase a cable to him.Prefer wire with copper core.Calculate the cross section, which should be taken with some reserve.
coffered ceiling mirror mounted on the frame, which serves as the basis for the entire structure.The whole plane should have a regular geometric shape that defines the frame.
Therefore, the work should be taken carefully enough.
- to start preparing the ground plane.Removing the old coating.For this purpose we will use the brush on the metal;
- examine the surface.If there is a manifestation of the fungus, then you should get rid of this disease (sm.Gribok ceiling - the emergence and solutions).It is necessary to handle the plane
antiseptic, which is commercially available.Make treatment twice;
- After that we need to determine the level of the placement plane.To do this, find the lowest corner of the room, add to this the height of the rails and put a mark in this place;
Note: If you plan to mount a heater.Then it should be provided immediately.Including this.
only should not be forgotten.What insulation must not be deformed during mounting.Otherwise, it will lose all of the properties.Take another and the gap to one cm.
- mark is, and now it should be moved to the other wall.This is best suited hydraulic level, it will make it work as closely as possible.
It can be purchased in retail or do it yourself.Portable size;
- After that, we need to connect all the dots.To do this is to use nylon thread.With its help line just bounces.Now we have the level of fixing the ceiling;
Warning: Installation can be performed on metal profiles, or wooden beams.If you choose the second option, then it is necessary to bring the material to the installation site before, and to process the antiseptics.
They will secure the material against rot and moisture.Extend the life of the assembly.
- Now fasten trim moldings.To do this, cut the elements in the desired size.
For this we use hacksaw or grinder with cutting wheel;
- Now do mount.For your regular wooden wall screw.
for concrete and brick surfaces need to apply the punch and make the connection with dowels .Just do not buy dowels included.
Purchase separately pacifiers and buy them screws, only take less than the diameter of the orifice for a couple of mm smaller.In this embodiment, the connection is rigid and reliable;
- now makes attaching hangers.The connection is made with the help of anchors.The distance between them is about 50 mm.
hole is performed using the punch;
Warning: immediately identify with the installation of lighting.To install them, too, should apply suspensions.
- now will strengthen basic guide.We make them cutting to the desired size.
at fixing the main guide and established the suspension placed on one edge of the near-wall baseboard.Joining the main and auxiliary rails should be carried perpendicularly, that is at a right angle.
To do this, use the square building;
- Now fasten the intermediate guide.They cut into the desired size and paste between the main bearing, the interval must be half the slab.
After mounting frame must be installed fixtures.It must be said that it is necessary to think in advance.
If you use the energy-saving lamps, then you have to do the installation step-down transformer, which should be easily accessible.
should also immediately determine the attachment and separation of the box.To her, you also have to get safely in case of breakage.
Warning: pre-calculate wire size.Do not take the butt.The cable must be free supply of power.Give preference to a material with copper wire.
- determine where to install the junction box and fasten it;
- now marks the site of the installation of lighting fixtures and put a mark on the ground plane;
- Do carts to these points and fasten the cable.Business Wire Connection using terminal blocks.Avoid the use of
twists.Klemnik provide reliable and lasting connection.
Do not forget after the installation of the ceiling may have damage and then there will be hard to get, so do all very high quality and reliable;
- After fixing the cable to be connected lighting fixtures.Check their turn on the power.
look light distribution.It should be made mandatory.
At the moment, you can fix and alter.After establish a ceiling would be difficult to fix anything, and sometimes impossible;
- If the distribution of the light has come.Then disconnect the light and turns off the lamp.
at the anchor lighting makes the release wires to this material without any problems enough to connect;
- If you plan to install additional insulation, then it's time to do it.
mirror mount plate
To properly make a mirror ceiling, you should say the following: The elements themselves are covered with a protective film, which should not be removed prior to installation.
And in no case do not make pressure on the mirror surface, otherwise you risk to spoil it.
- coffered ceiling mirror mounted start from the middle of the room .Calculate and properly distribute the elements.
first is all integral elements of the installation;
- Then cut the slab, which are mounted on the perimeter of the room.In no case do not cut several plates at once.
Do this one element, and wherein after the quality measurements;
- edge plate which is adjacent to the near-wall skirting is treated with hand tools;
- Before any operation is the opposite of the frame member to put the line on the diagonal.Then you will see the level of fastening elements and be able to regulate it;
- So treat the entire plane ceiling.In places where the lighting element should first make note and place the cable outlet.
After that, make a hole and already thoroughly fasten plate;
- Now you can attach the ceiling moldings, which is selected depending on the room (sm.Potolochny skirting How to choose: advices of the master).Remember, the higher the ceiling, the greater is taken plinth.
And if the plane below, the narrower it is worth taking.
you instructions on how to install a mirrored ceiling.The price of the material is not so high and performing work with your own hands you make yourself nice and do not spend the extra money.
After proper setting, you'll enjoy every day of your product.