Balcony, how much of this sound!The times have passed when the question "What do you have on the balcony?" Russian man replied: "Everything!»
Now we know the normal human interiors, and often do balcony or loggia full bathroom.
Usually, ordering warm glazing manufacturer with the installation.But the ceiling in the loggia or balcony of the manufacturers with the unit not be ordered.They have to make their own hands.How to?Read the detailed recommendations.
We expect more new restrooms or work of warmth and comfort.So first you need to think about the insulation (see: How do insulate the ceiling on the balcony - to create comfort with their hands) loggia / balcony, focusing on selected finishing (facing) materials.
Professional glazing, providing tightness and thermal insulation, we already have, so it remains to take care of the walls and ceiling.Moreover, the ceiling - the main element that should be warmed before decorate, because through it
Not because through the wall it does not pass, but because it is much easier to insulate the wall, and the emphasis on lay people and make them forget about the ceiling insulation.
This is probably, the easiest and affordable way , to the same - inexpensive.Ceiling may simply nabitdosok ribs down arranging their width twice the thickness of the mineral wool layer (which is usually available in rolls).
boards can be fastened to the base by any hardware.Mineral wool is rolled up at the ceiling, so to speak, stuffed between the planks fixed in any way, up to tape, and then finally secured already rails or ceiling panels.
Important: Be sure to insulate the hygroscopic cotton with plastic wrap to waterproof, to prevent accumulation of moisture inside the insulation.The process is very responsible, you need to ensure that all corners and joints of the film, as well as places of interfacing walls were protected.
panels or slats stuffed across the hinged boards, so when installing dosochnogo framework should take into account their direction and stuff across the board.At the same time pick up the thickness of the boards to cut at least you can safely drive a nail or screw a screw, which is hung on the balcony ceiling decoration.
That is, the board 1 cm thick will not do.Stuffed full Coating will securely hold and insulation and waterproofing, adhesive tape so let them fall off easily.
also quite common, simple and not very expensive technology.You can work alone, the material is lightweight and mobile, not something that rolls of mineral wool.Effective insulation.
remembers how to do the job:
- plates are cut across the mercy of the ceiling.
- Each element is greased with adhesive over the entire area, in order to ensure complete adhesion to the substrate.
- Glue boards, then still attach them to the bottom of the ceiling with plastic plugs.
- can proceed to the final wall surface of any material.
As you can see, the work is simple and accessible.Material cut with an ordinary knife.
The sheathing ceiling - is selected depending on the interior and finance available.Here are some simple solutions.
Polystyrene wall tiles
Also material from the affordable price range, but it can be glued only in a warm room.Actually, we've already warmed the balcony, so we can start.
you need tools and materials:
- Putty;acrylic-based paint;
- Tile adhesive for polystyrene;
- Plinth polystyrene ceiling;
- spatulas of various sizes;
- Measuring and layout tools;
- Knife construction.
Because the material is glued to the insulation on the preparation of the surface, we are not talking.Ideally, a polystyrene tiles need to align and thoroughly cleaned base.
installation we will conduct the following technologies:
- Determination of the center of your ceiling.To do this, we use the "diagonal" way, crosswise pulling two ropes on opposite corners.Place of intersection - this is the desired point.
- Now do the opposite: through the center of the axis perpendicular to spend only with tips on middle of the wall.Get the benchmark for gluing tiles (if you choose this line, and not diagonal method of gluing).
- Start stick tiles from the point of intersection of the axes, the first four of them, and will set the sequence in which the rest.
Tip: we coat the entire surface of the tiles do not need to be applied droplets on the corners and in the center of the square.Tile is pressed to the ground and held approximately 1-2 minutes, that is enough for high-quality setting.
- During gluing and after a few hours all doors and windows to the loggia or a balcony should be closed to avoid drafts.Well, as a wallpaper - a well-known factor is the quick and successful otvalivaniya.
- After the process proceed to the solemn edged baseboards.They, too, are cut with a knife and glued with the same adhesive.
- How to make an exclusive design in standard polypropylene panels?Skirting themselves ceiling panels can be painted with acrylic paint in any color.Options for coloring can pick up on the interior photos online.
They are one hundred percent replaced the wood in all its manifestations as liners.durable, economical and have a presentable appearance, though the price is not too great.
color colors mass, and drawing also can be matched to any interer.Est in the production of MDF panels that have increased resistance to moisture - they mount on a balcony or loggia fit best.
Fixing such panels also can be performed on Rack-frame, but you can - in the framework of alyumoprofilya.
natural material that provides excellent climate miniusloviya.Retain moisture in the norm, it will look naturally and beautifully.
If you buy stuff from additional treatment spetssostavami or perform such processing itself, the ceiling on the balcony will be permanently protected from mold and mildew.
Molded board also mounted on the frame of wood or metal sheets.You can make the ceiling surface in several levels, and vary the direction of the rails to give the interior originality.
This is probably the most economical among modern materials, but its specifications practically on any parameters are not inferior.Even in the absence on the basis of insulation linings of plastic is not exposed to moisture.
Installation is carried out surprisingly easily (see: How do plastic linings mounted on the ceiling) as separate panels, the slats are very low own weight.Aluminum frame, too, can make a lightweight, not too boring "parts" of the guide.
Add to the list of own ceiling system "Armstrong", gipsokratonnuyu finish, a simple patch chipboard or MDF podshivanie ceiling.Describe the technology and benefits of each option is not necessary, it is common knowledge.
Stretch ceiling on the balcony
this option - perfect in terms of appearance and flatness.Tension ceilings on the balcony, you can do yourself (sm.Montazh suspended ceilings with their hands - it's you), without calling specialized teams, since the area of the room is small, and with the canvas to work convenient and easy.
And in terms of the interior - neohvatny volume!You can order the canvas is not only coloring under any existing interior, but also perform a pattern on it, and even put a picture of a personal album.This ceiling decoration on the balcony of milestones lead guests in awe, and encourage you to be proud of yourself!
Mounting tension ceiling
is recommended to watch video technology device tension structures, to understand in detail the essence of the process.
Next - Arm the instructions below and start working!
- Along the perimeter of the room to the wall horizontally attached main guides, they - the only ones.We recommend using specifically designed for such structures profile baguette .Installation instructions on the perimeter of the frame types that you need to use water or a laser level, mark the zero line, and so on - all of the usual technology.
- before unwinding PVC film which is, in fact, the surface of the ceiling, you need to enter the premises heat gun and turn it on for a while.After heating the air in the room to 40 degrees can be stored and unwound film.
Tip: Samu gun need to warm up to 60 degrees, even if it stays on while you are working with film.But watch out for, so that PVC is not approaching close to the muzzle of the gun running!
- film is attached to the base plate.Mounting always start from the corner which is to be marked on your film as a base.Then it secured diagonally opposite corner, and then the same sequence attached remaining - not necessarily two.
- side face side of the film infest profile baguette with a small spatula.The direction of mounting - from the corners to the middle of the side of the web.
- After filling material should be checked again, there is not any free edges that are hanging or not fully primed;
- additional heating of the web material from a heat gun, but close to the mouth of the equipment does not hold;
- When the room temperature rises to about 50 degrees, it is possible to stop the heating.
- After the film has cooled to room temperature and, its surface is perfectly aligned.
Stretch ceilings can be installed on the balcony is even easier if you buy PVC film has a special harpoon, welded to the edges.In this case, refer to the enclosed instructions on installation surfaces.