Many people want to make an original ceiling is not in the living room, but also in the kitchen, in the bathroom.The first question asks himself if this man: "How to bypass pipe stretch ceiling?".
Indeed, in many areas of communications: water and gas pipes, hoods, sewer risers.Despite the fact that the job with their own hands will not have to perform, we are motivated by simple curiosity.
So you contacted the company, which specializes in the installation of suspended ceilings and was invited to the house specialist.Making stopped, he pointed out all the features of the configuration of the ceiling.So
- These features include the number of corners, projections and curved sections;the presence of pipes and risers, ceiling cornices;number svetilnikov.Prichёm, lighting must be available to an expert could take into account their design.
- guager sure to ask what communication will need to be placed in the ceiling space: burglar or fire alarms, wiring, cables, ceiling heaters, etc.
- All this information is absolutely necessary to ceiling coating PVC film was made correctly.Even small, seemingly inaccuracy will cause that the blade is not suitable for your ceiling.
- After computer processing of data provided by the measurer, the drawing is done, and the order is passed to production.If mounting tension ceiling will be made harpoon method, the edges of the ceiling directly welded hooks for attachment.
If you're wondering how to make ceilings: a bypass pipe, cut round holes chandeliers, welding of harpoons - you can watch the video.As they say, better to see once.
to crawl tube, suspended ceiling is cut in the right places, and make a hole of a given diameter .In order to close the pipe joints with an edge web use special plates, as in the photo.
- polycarbonate plates reinforce the cut portion of the film, and make it aesthetically pleasing view of the completed.The diameter of the holes in the plate must be seven or eight millimeters larger than the diameter of the pipe.
Standard length plates 15,6sm, in a strengthened version - 21mm .
- incision canvases perform after it tucked in a baguette.Cut to be careful - the film can easily be broken.
depth of cut should be minimal, and the web - tightly pressed against the tube.
- place chosen for the incision where the tube fits most closely to the wall.Use with the ordinary scissors or knife stationery.
At the end of the cut line is cross-sectional, which will provide the normal closure of the tube free end of the web.
- Excess film is cut, leaving a few centimeters to refuel prints.Then put the cover on the chimney.
decorate ring pipe under the installer can cut yourself, plastic 2mm .
- This method is used mainly for installation of seamless stretch ceilings (ceilings sm.Besshovnye: installation types, characteristics, installation manual).Plastic, from which the elements are cut bypass pipes often white.
Therefore, if the ceiling is made of colored cloth, the ring is pasted over the same cloth, bending it inward.
- There is another way that you can bypass pipe - suspended ceiling can have a complex configuration, and pipes are of different diameters.In this method, a plastic ring placed inside the web.
- ring is not only in the bypass pipe, but also in places of fastening fixtures of any equipment. Detailed instructions on the topic of installing the rings into the fabric may need only a novice installer.
- main problem when mounting tension ceiling in the kitchen can be no gas or water pipe and a gas extractor column, if any.After the duct is heated so that the PVC fabric can weld.
- In this case, the tension tape to protect.You can do this by setting the air around the frame of the plasterboard.Or
have to replace all the usual corrugation on sandwich pipe.This is a double pipe with an inner insulating layer.
- To protect the edges of the fabric using heat-resistant plastic rings .Besides drawing water heater here include holes for the installation of lighting fixtures, heating pipes and hot water.
price of component parts made of plastic is low, therefore the construction cost is practically not affected.
if you start the installer, and want to learn as much detail as set ceilings, crawl tube - video will help you much better than any instruction.Customer this knowledge is hardly needed, as for the production of such works requires special equipment and skills of its use and compliance with safety regulations.