Ceilings Baikal is one of the many functional designs, which now offers consumers the company Armstrong.The lineup of products is more than five hundred titles and Baikal occupies a worthy place in it - and if you focus on the demand side, one of the first.
Nothing contributes to the popularity of any product is the correct ratio: price plus quality.In this case, we are dealing with such a plan.
developing any product, be it a car, household appliances or items of daily demand, each manufacturer clearly understand, on what category of buyers targeted a particular product.Ceiling design is no exception: there are expensive model with this design, and there are low cost options.
It is to him and ceiling panels are Baikal.
- They are everything for ceilings in public and administrative institutions, sport and health-improving complexes.All these buildings have large areas, and low cost panels can save budget funds, not very generously and regularly allocated for the repair and decoration.
- ceiling panels are made from solid Baikal mineral fiber, whereby products are obtained strong, with nearly one hundred percent moisture resistance.They are mounted on the frame, as a decorative element suspended ceiling system, and are classified as cluster (modular) structures.The panel size corresponds to European standards: 600 * 600 * 12 mm.
- Exterior panels without claim to a special decorative effect, which is characteristic of virtually all office versions. White, with a shallow relief and the characteristic "chervotochinkoy", they are hygienic, well absorb noise, have a high level of fire safety.
Armstrong offers a good range of different textures and functionality.The panels are impact resistant, acoustic, translucent, so you can use them in different rooms.
Moreover, modules may be combined, as a result, to obtain here a design as pictured on.
Besides panels, suspended ceilings Baikal include elements of the frame, and fittings, which are listed in the table:
|Completeness harness||size and purpose element|
|Included are two types of guides: longitudinal length of 3.7;and a transverse length of 0.6 meters.Rods have a T-shaped cross-section, and at the ends of a special lock connection that eliminates the need for installation without capping.|
|L-shaped profile, size 19 * 19 * 3000 mm, mounted on the perimeter walls.|
|suspension has a maximum length of 60 cm. It supports system and allows you to adjust the indentation on the overlap.|
|anchors are used to secure profiles and hangers to the base.|
To calculate the required amount of each of the ceiling system, the quadrature of the ceiling multiplied by the corresponding coefficients.Knowing them, it is easy to make a calculation with their own hands, using a calculator.
Thus, the coefficients for components:
- Panels: 0,36
- rails: 0,21621
- Cross rail: 1,333
- Angle trim: 0,166
- Suspensions: 0,6
After receiving the estimated amount, add on at least 5% for the metering error, uneven walls and waste - will be better that, than not enough.
suspended ceilings Baikal relate to systems with an open profile, which is involved in the design surface.To make this possible, the panels have a special edge rectangular (Board).
- suspension length of 60 cm allows you to put in a ceiling space not only lights (see: How do install fixtures for false ceilings - detailed instructions) and fire sensors and split system.Naturally, calculate the size of the indentation on the base grounds should be taking into account the dimensions of the embedded equipment.
- Consider the need and his weight, which should not exceed 6,5kg figure the square of the ceiling.Construction of communications and electrical work is best performed before installing the frame, as to do so would be problematic after.Only then you can begin to layout the ceiling.
- If the ceiling mounted equipment is not planned, a space can be very small.The main thing is that it allows you to hide all exposed areas of overlap and wires.The indentation should be celebrated, starting from the lowest point of the base, which is determined by the level of construction.
- line outboard surface otcherchivaetsya once around the perimeter of the walls.Pencil and ruler will not help.Much smoother obtained if the point to note at the corners, screw the screws and pull the ink thread.
- Similarly, applied to the ceiling of the axis in increments of 60 cm, at the intersection of which will be fixed suspensions.First you need to draw a center line, and have them in the direction of the walls - the rest.
- Mounting ceiling Baikal starts with setting the L-shaped profile on the wall, along the line of indentation.Cut it to size hacksaw.To make the cut at an angle, you need a regular school protractor or a carpenter's tool as a miter box.When installing the profile it is so colored regiment facing down.
- Next fix the ceiling hangers and then the longitudinal guide rails (length 3,7m).At all profiles have slots for performing end connections, and holes into which threaded borehole with a hook at the end.
When you connect the two profiles, speaking at the end of a plank, another is put in the slot.To better understand how it's done, you will help the manufacturer's instructions, as well as video.
- Under this scheme, all the models are mounted skeletons coffered ceiling Armstrong.The only difference may be the size of the cell, which must correspond to the dimensions of the panel.
Some kinds of panels are available for modular ceilings rectangular size of 600 * 1200 mm.Accordingly, on sale there and support section length of 1.2 m.
- mounting profiles, as, indeed, and the panels is carried out from the center to those who have to cut, appeared at the walls.Since the ceiling will look neat and cut the panel, even if it is not very smooth, closed shelf of wall profile.
After installing the frame longitudinal zones, proceed to the installation of short cross members.
- Carrying straps immediately cling to the suspensions, and at the end of the assembly, by means of adjusting the level of their spatial location.This is done by sliding the tab suspension and podgibaniem its spokes.
way, it is better not to install the plate immediately after the installation of the frame, and after a couple of days.During this time, the structure can sag under its own weight, and leveling need more time.
After that, just need to put in a cell panel and set lighting.