Suspended ceilings Albes produced in our country, according to the Italian and German technologies, each of which has its own characteristics.What they are their fundamental differences?
As with the different installation technology of a particular model?This, and many other things, tells our guide, as well as video in this article.
How to build rack ceiling
Metal slats long been firmly established in the list of the most popular finishing materials for ceilings.They are aesthetic, not afraid of moisture, and therefore are not subject to corrosion.These properties are sufficient criteria to select the design for the ceiling rack space with high humidity.So
- Initially they were installed, mainly in public schools, but the practicality and beauty ceilings made of aluminum or steel slats helped expand the scope of these structures.Pinion aluminum ceilings Albes is a set decoration, bearing and fasteners installed in a harness.
- As already mentioned, they are made of two technologies.The main difference in the design of the ceiling, made by German and Italian technology, is itself a form of strips.The Germans, it has strict geometric forms and a sophisticated Italian design.
Their slats are smoothly rounded edges, leaving them faced with the ceiling surface, it looks quite different.
- distinguished and width of the panels: in Italian technology is 50 mm, 100 mm, 150 mm.In systems constructed according to German standards, slats may be wider - 200 mm.
Accordingly, mounting rails, which rails are fastened in each case have individual configurations.Perhaps it's all the difference, but the mounting rack ceiling Albes, in both cases is similar.
Configuration rack ceiling
basis of all suspended structures is a frame on which are mounted decorative elements - this also applies to suspended ceilings.Manufacturers usually offer all the necessary details in the set, only need to correctly calculate what and how much is required.
Ceiling aluminum rack Albes has such completeness:
|Appearance and item name||What is the function of|
|aluminum panels or slats,are decorative elements.Price ceiling usually depends on the version of the front surface finishes.It can be electroplated, resin or paint, powder coating.|
|Closes the joint between the panels is lined decor for poverznosti.|
|Is fasteners for aluminum slats.|
|mounted to the wall around the perimeter of the ceiling.The visible part of the corner can be decorated.|
|constructive and decorative element of the frame, closing the ends of the panels.|
|Sets the support rails, and provides a ceiling for retreat .Fastened to the base potolku.Pri small indentation used mini pendants, as in the photo.If you want to indent more than 10 cm, spring hangers or used needles.|
|anchor for attaching hangers to overlap.|
|Fastening for profiles|
In any store that sells this product, you calculate the necessary amount of all elements of the ceiling, you need only tell the seller, what are the dimensions of the room.Reiki you narezhut into segments that are multiples of the length of the ceiling.
Other materials will count with a small margin.Number of anchors and dowels are usually calculated according to the norms, and in each case can be individual.
sequence of works
When do finish the primary premises, before installing rack ceiling to make special preparation is required.The only with open joints or cracks in the concrete, they must be repaired.Base, which had previously been plastered, it may take some training.
Prior to installation work, the quality of the screed should be examined:
- If tapped under plaster void, or it is poorly kept, better to remove the tie.Otherwise, she said, showering inside, his weight will deform the slats.
In other cases, removed only the decorative coating.I do not mean whitewashing and wallpaper, tiles, boards - they will interfere to produce layout and electrical work.
- outboard surface of the indentation determines the height of the recessed luminaires.The smallest size - 8 cm, and the support rail adjustment half - 4 cm. To eliminate this difference, used suspensions.But there are situations when you can do without them.Take, for example, the ceiling in the bathroom.
- The majority of apartments in apartment buildings, are not installed in the bathrooms, ceiling and wall lights.Ceiling area of 5-6 m2 additional illumination does not need at all.And time is not on the ceiling spotlights, and then install the support rails can be mounted without hangers - directly to the base.
- In small spaces, beams can be mounted on wooden slats.But if there are irregularities on the basis of, or differences in the planes of two adjacent floors, no suspensions, nevertheless, it can not do - Only with their help, you can adjust the spatial position of the outboard surface.
- marking the ceiling made under the scheme.Stepping back from the wall for every 40 cm along the perimeter of the ceiling otcherchivayutsya line.The space therebetween is divided into segments: length 1.2 m, width of 30 cm. This is indicative figures
if the distance between them is not a multiple axes, cell sizes can increase or decrease slightly.Will only draw on the basis of grid interconnected opposing mark.
- This is done using the dye yarns.Screwing on one side of the screw, it is tied to a thread and stretch it to the other side, received an imprint.
The points of intersection of these lines will be drilled holes for anchors and mounted hangers.Grebenki mounted along the grid lines, but in only one direction - it must be perpendicular to the rail positioning.
- By assembling your own hands, wall corners before installation you need to prepare.Their vertical shelves by 35 cm, are marked with a pencil point at which you want to drill holes for fasteners.Then, by applying to the corner line indent, through the holes on the wall is necessary to outline the point of drilling.
- If you have an assistant, can be done in another way: one person holding area, and the other directly through it drills the wall. On the other side, where the ends of the strips will be placed, not mounted area and a U-shaped profile.The mounting rails produced from wall to wall, cutting where necessary, holes for lights.To do this, use the drill nozzle on the "crown."
- Metal panels are thin, and flexible enough.To the ends of the rails after the installation is not folded up, propped their struts, carved corners, and in the picture on top of it can be clearly seen.If the width of the ceiling is not a multiple of the size of the rack, the last element of the lining have to cut to length.
is done grinder or metal shears.Cutoff will not be seen, as it closes a horizontal shelf bracket.
Reiki set, latched clamps.Depending on the design of the ceiling, they can be interleaved with inserts during installation.If you need to remove, dismantle the construction start in the reverse order - with trimmed rack.
Just on our website you can learn about how to make a false ceiling Knauf.