Repair ceiling tile has long been used in the decoration of the plane.This is an excellent lining material, which is used for a long time.
Who is the sales market a great abundance of products.There are even 3d ceiling tiles.
Just install this item price is quite high.But this work can be done by hand.The
and reduce costs.This will be our article.
you can view photos and videos on the topic and make the right choice.It will be shown step by step instructions to perform this operation.
Types ceiling tiles
proposed material has several kinds.Before making a purchase should be familiar with these products.
which exists in several versions that differ in material production.Ceiling tiles can be mounted on the walls in various designs.
But in this article we will look at fixing it to the ceiling elements.It's a little more complicated.
Now we proceed to the instructions on how to repair the ceiling tiles.
will understand their varieties:
- tile pressed , which is manufactured by molding foam polystyrene material.Each element may have a thickness of 6-8 mm.It's pretty easy stuff;
- Tile injection , this material has the correct geometric size.If the bought ceiling tiles 600x600, it will be this size.
Items can be deep drawing, which can give the room comfort, this type of ceiling tiles made as a result of the sintering raw material, which at its core is polystyrene.The thickness of the ceiling tiles of the type range 9-14 mm.
- tile extruded , which is done by pressing and is coated with a special film.The surface of the elements is completely smooth and devoid of the porous structure.
may be performed by various types of wood and stone.It has many colors and shades.
respond well to a moist environment and can be used for lining the bathroom .To her and ceiling tile is a lag.
This series has recently appeared on the market sales;
- Tile Ceiling plaster .Her many make themselves at home.
True, this material is not as easily handles temperature, unlike the previous ones.Therefore, ceiling tiles made of plaster is not suitable for baths and saunas.
Attention: Before you make your choice, you first take into consideration the area where the material will be attached.What is there is there any moisture and temperature extremes.
only then make a choice.Repelled from the media host cells.
Positive and negative in the tile PVC
This material is most often used for finishing the ceiling.And there are many reasons.
These elements have gained no small popularity among the population.In principle, they are versatile and can be used in all types of buildings.So
- PVC ceiling tiles are made using only environmentally friendly materials and do not harm human health.The lightweight material, which is well placed in the ceiling, and does not increase its weight;
- This tiles on the ceiling rather easily attached.Easy to install and slitting.
itself improves sound insulation and thermal insulation of the room;
- Fire of the element allows it to be installed in all types of facilities;
- has a variety of colors and shades, which will emphasize the individuality of the room;
- Durability is also not unimportant factor to give the choice of this particular product;
- Easy maintenance.You can wet cleaning the entire plane.
Like any material, it has its drawbacks, you should know:
- This ceiling tiles are not installed in places where there is direct sunlight.Then, the material can change color and warp;
- If fixing to do with the seam, then there is no kind of structural integrity;
- There are also problems with lighting.You can not use the built-in fixtures.
And the usual chandelier is better to install with a reflector.It is not necessary to overheat a tile;
- Tiles can not hide minor evenness ceiling.But if there are large differences, then have to do the alignment of the plane with the help of plaster;
Note: If you already eat a chandelier, and no plans to change her mind.Then it is necessary for such repairs just to make the change to energy-efficient incandescent bulbs.
Then the issue will be resolved.
now decide the question of how to calculate the ceiling tile.It's not a difficult question, but it is done quite well.
We must take into account the waste:
- take measurements of floor space;
- Multiply one value to another and get the desired number;
Note: If you use a ceiling tile with a pattern, then it is necessary to begin to count the number of integral parts that will be included in full.Then try on the size is not the full entry items.
And only after that to make a correct calculation.Sometimes residual waste a lot occupied in the design plane.
- Before buying you should pay attention to the packaging, which is always written, how much area is covered elements.This facilitates the task;
- to the volume of the entire tile is added at least 10% on the cutting of.I repeat, at least.
need tools and material
To conduct the work we need to prepare the right tool, without which we can not do:
- first thing to prepare a convenient ladder.Or just take the kitchen table and cover it with something;
- take and the level of the building.We will have the right to conduct styling and make markup.
If you do not perform, each mm.Deviations will result in variations in centimeters eventually;
- long line of at least one meter;
- comb spatula (this is the case, when done in the laying mastic).
It was a tool.
now we should and purchase material for conducting work:
- We need mastic tile ceiling.This is the case if there is significant damage to the ceiling.
If the plane is covered with stucco, which is normal, then it will be enough glue;If
- will run jointing ceiling tiles, then you can buy acrylic sealant for ceiling tiles.This is particularly important for finishing the bathroom;
- ceiling tile can be laid on the dry mixture.If the plane is not very large differences, then you can smooth the surface in this way.
Installing the tiles on the ceiling
Following the acquisition of the necessary tools and materials you can begin installation of ceiling tiles.All work will be done in several stages of which will be discussed further.
Preparation of the reference plane
the ceiling tiles must be fixed on the prepared surface.Here are some nuances.So
- Immediately inspect the base surface.We need to identify the differences.
fact that, after finishing all the bumps will be visible even more.Especially if applicable ceiling tiles with patterns.
For this we need to clean off the base surface of the previous coat .To do this, use a brush on metal.If
was whitewashing, then you should read the article on our website, as the coating can be removed without much difficulty;
- inspect the plane.If there are small cracks, then they will block tiles.
If there is peeling on the ceiling material, then you should remove them.You can even use the grinder with a circle;
- the presence of large cracks, should be carried out putty plane;
- Now look at the level of the ceiling.If the flatness of the plane is in doubt, then mark a line fastening.To do this, we define the lowest corner.
make a mark.Then it was transferred to other corners using the water level.
After this repulse the perimeter line of attachment for that use nylon thread.Then look at the deviation from the reference plane;
- If the deviation is not more than one cm. Then you can do mount on mastic.
If it is up to two cm. Then it is necessary to hold the plaster plane.
If more than 2 cm.
Then it makes sense to make a false ceiling.The fact is that if applied too thick layer of plaster, whereas during the time it starts to flake off.
Warning: If you work in the bathroom or in another room with high humidity, then try to apply a layer of plaster as little as possible.She imbues moisture and quickly starts to lag.
- If the deviation from the plane up to 5 mm.Then fixation can be performed on the glue.
However, this happens very rarely.Therefore, we choose the average.
and tell us how work is performed with the use of dry mix.You can rely on ceiling tiles and smooth out the bumps of the reference plane.
determines how the accommodation
now determine how to put the tiles on the ceiling.
For this there are two options, which are carried out in different ways:
- When not laying a large area, you can do it from one wall and towards the other.Home work should start from the wall, which is opposite the entrance.
Note: If you choose this option should be properly distributed pattern, if it certainly applies.This is not a ceiling tile Armstrong 3d.
and bracing is not always on a flat surface.It is all right to count.
- for premises that have a large area more acceptable second option.Here, the plane is divided into parts.
is the center of both sides, and these points are connected.The point of intersection defines the center of the room and away from the fixing is conducted.
Note: This option can significantly increase the consumption of tiles.This should be taken into account in the procurement of material.
When selecting the installation method should be based on the configuration of the plane.But the principle of the installation will not change.
For example, here's how to put on a ceiling plinth trim a different color.This option is selected, many patterns.
first surface makes the figure of regular geometric shape.We gap remains along the edge, which determines the amount of the tile.
Thereafter sticking tiles around the perimeter of the room on this line.Create a border.
There should not be afraid of what will be a gap between the member and the wall.It overlaps a plinth that can find in the retail of various widths.
Preparation desired solution
This mixture is on sale in two versions.It finished material and the dry mixture.
If not a large amount of work can be taken and finished material.But its price is higher than twice of the dry mixture.
So take it easy profitable.So
- pour the powder into the container.It is best to use a plastic container out of the paint.
It is most suitable.It has a smooth bottom edge;
- pour powder and added not a lot of water.This mix;
- Then take a drill with paddle, that it will help make the mixture smooth and free of lumps, and mix.The solution is brought to a thick cream.
It must be plastic.
Now after buying everything and determine how to mount and can be decorate the ceiling, on the tiles should look carefully and avoid deviations.If it does not stick, then one mm in one meter turns centimeter.
therefore initially follow the correct installation.
- Before starting the reference work is being done to sort items by size.We divide them into three kinds.
average stack will be the biggest.With her and is starting work;
- We have already defined center and from this point should begin.Each item must first be put in place and ensure correct mounting location and only then apply a layer of adhesive mixture;
- solution is applied in two ways.In the first it is necessary to apply paste to the base of the ceiling, and then perform the mount.
But this option takes practice.In the second embodiment, the mastic is applied on the tile and then fixing is executed;
- Apply the mixture on the surface with a comb trowel.The layer should be about 5 mm.
be applied in line mounting flat bar.After that fasten the item itself.Speaking solution
remove with a spatula.A bar sits down gently.
gently pressed and wish a little rotational movement.It is then better to get to the right place;
- Thus the connection is carried out on both sides of the line;
- If you do masonry with a seam.Then it is necessary to apply the building crosses.
They provide a smooth seam.They must be purchased in advance;
- perform the work to completely fill the plane.
After full implementation of the work necessary to wait a bit and then go to pieces with a spatula.Clean them.
This is the version when you make them.We are waiting for the complete drying of the elements and wish to fill the joint.
After that it was time to make the connection plinth ceiling.Try on, cut off (it has a detailed article on our site) is attached.
This type of finish will give comfort.Ceiling tiles decorate the entire plane.
If you do not hurry up and do the right layout, then you will be convinced that this work is not that difficult to do.
Just on our website you can find out how to remove the ceiling tiles without problems.