metallic gas cylinders for suspended ceilings, which are used in the production process of this work, often explode, killing people.In the photo above you can see a similar occurrence in real life.
In this regard, can not help but question arises: "Is it possible to make installation of suspended ceilings without gas?".On this and other issues, we will try to answer in the course of this article.
Why cylinders explode
Currently, the installation of stretched canvas occupies one of the most active position in the production of finishing.Moreover, the PVC fabric pull not only on the ceiling but also on the walls.So
- technology tension PVC fabric it requires preheating to the desired temperature.For this purpose the heat gun that runs on LPG.
if used in the process of mounting the equipment properly, the installation process should be safe.But this is not always the case.
- Gas Cylinder itself is a potential source of danger.But it does not happen to defective balloon exploded for no reason.
Most often, it is notorious human factor: the violation of safety rules, as well as a violation of the process.
- Such violations include the operation of a gas cylinder, but that is brought in from the cold room.Everyone knows that even appliances can not be included once, and you need to give it to warm to room temperature.Same thing with the balloon.
- Another violation may be a situation where the cylinder during gas gun is on the trajectory of the hot flow.Situations can be set.Unfortunately, people who have committed such violations, no longer able to respond, as it were.
- Problems usually arise where for work are taken by amateurs.The companies that value their reputation, all the installers are trained and work with equipment obtained admission.
And let the price of the installation at such firms a bit more expensive than private traders experimenters.Savings are totally inappropriate - life is more expensive.
- It also happens that the cylinders are filled in non-smoking areas.We all understand that the amount of gas in the tank must be accurately dosed.If
download volume of more than required, the gas will not be enough space for thermal expansion.It's not a balloon that can be stretched.
- In normal operation, the gas cylinder for ceilings never explode.After all, they are the same people in the residential and holiday homes without any problems.
on stationary gas stations tanks examined for corrosion tests and certifies.Defective bottles should be disposed of.
- Many people today get rid of the metal cylinders, preferring variants of composite polymers.The walls of these cylinders are transparent.
This makes it possible to visually monitor the rest of the gas in the cylinder at the end of the installation, as well as its level of fill during fueling.
- But most importantly, that the polymeric cylinders did not corrode.And further.The ductility of the composite material dampens the force of the explosion, even in the event of mechanical damage to the balloon.
Installation of ceilings
impossible to do without the gas installation of suspended ceilings, at least, if you are using PVC film.With the new polymer tank installation process is completely safe.
But this does not mean that in this case is not required to observe basic safety precautions.
Installing fabric ceiling
there mounting options, allowing to establish ceilings without gas?
There is only one option - to pull the fabric seamless web.In this case, a special fabric widths up to five meters, allowing you to block a seamless ceiling in almost every room.
- technology its installation is the most secure, because does not use a heat gun.No need for high-precision measurements, and that allows you to work with your own hands.
You only need a little instruction, and even better - video.
- Preparation of the surface it is desirable to perform well: it leveled and sanded.Since the web can show through, stains on the surface (see: How do remove yellow stains on the ceiling on your own), as well as irregularities basic ceiling spoil all impression.
- for mounting paintings need to install a frame made of aluminum profiles.Previously, the perimeter of the ceiling, with a slight indentation marking up the line on which is fixed a profile.Fixing the profile to the wall with dowels made by holes nasverlennym 40-50 cm.
- installation paintings begin with the fact that it is fixed in the middle part of the profile, leaving a margin of about fivecentimeters.The web is pulled gradually from the middle, symmetrically moving in both directions, and is fixed at the corners.
- In case of formation of wrinkles on the canvas, their heated building hairdryer.After all the fabric tightly over a frame, protruding edges of excess tissue can be removed and put decorative glazing beads.
- There is another way of mounting the tissue web.Used planed wooden bars cross-section of 20 * 30 mm, can be a little more.
of them are going frame and paint it immediately.Will fit a frame is easiest on the floor, and then install it on the ceiling with metal corners.
- Fix the canvas to the frame may be by any means: staple gun, Velcro tape, glue "liquid nails". Such a frame can be suspended from the ceiling, even on circuits.
And in tandem with some interesting design lights, you can create an original interior ceiling.
With this construction, the frame can be removed, if necessary, to dismantle the fabric washing and make refitting.One embodiment of the tissue of the ceiling you see in the picture above.Beautiful, original - and no danger!