Ceiling infrared heaters to testify could be the solution to the issue of heating in the country.Indeed, in such a structure should still think that set.
There are several options on the IR heaters and to give and will be discussed in this article.The first step is to correctly assess the prospects of such a facility, and only then make a final decision.
Choose a heater to give
infrared heater ceiling to testify can be divided into several types, in which there is a difference in use.And it is necessary to know and dignity and distinction of this design before you make your choice.
advantages of infrared heaters
These elements are somewhat different from their relatives oil:
- conducting the analysis is immediately obvious that this is a relatively new heater does not harm human health.The subject here is the heating of the man himself, and not the whole room.
heat radiation has a more direct effect;Action
- most heat is directed to a place where the people directly.It is, in principle, plus, there is not the required flow in the power supply.
All the energy spent for its intended purpose;
- This unit does not produce combustion air unlike PETN.But oil also did not burn, but in the infrared heaters are significantly lower power consumption, which greatly reduces your costs;
- Quick heating.That's for sure.Even
installed furnace is not capable of such a rate to heat the room.And the design of the oil is significantly inferior in this regard;
- Such heating is as close to natural.Therefore, it is also useful;
- quite a long time operation, also attracts the consumer;
- But there are also disadvantages to be reckoned with.For example cracking during operation.
It may be annoying, especially at night;
Note: There is one drawback.This heater can be dried for example pictures.Just put a container of water in the room at the time.
- This equipment is perfect for any interior.Photos and videos can be viewed on our website and choose the right design;
- entire installation can fully implement their own hands and without the need for outside help.And for this we need a little time;
- easy maintenance.The truth is worth saying.What
price product and not a little, unless of course talk about the quality of products.Only there is cheap Chinese version.
But they did not meet the expectations of the consumer.Prefer a known and trusted brand.
Choose a heater for questioning by type
These elements can be divided into several types.
Before making a purchase, it is necessary to understand what is preferable:
- There infrared ceiling heater to give the long-wave.It uses the heating element as a heating element.It
fireproof element.Heat to 230 degrees occurs.
These heaters should not have near objects, at least at a distance of not less than 50 cm.
- ceiling to give short-heaters.There is used as a heater coil.
It is located in the tube.Which is made of glass.
This is a more fireproof construction, as opposed to the first.The heating surface reaches 600 degrees, so these items should not placed near objects.
distance should be about three meters;
- There is another species that has recently come on the market sales.This film infrared heaters.
where the heating element is mounted on the foil.This heater can hide under and trim elements (sm.Chem decorate the ceiling recommendations Masters) and make it virtually invisible.
The design uses a remote control that is significantly easier to work with him.
Determine the required power
It's quite a significant parameter to be considered when choosing:
Note: The most correct fixing heater is running on the ceiling.Other less attractive in terms of efficiency.
Therefore, power is best calculated precisely because of such fasteners.
- immediately should say these elements are calculated for the voltage in the range of 210-230 volts.Therefore it is better to install a voltage regulator, which is commercially available.
This will significantly improve the efficiency and extend the life of the element.Instructions are included with each item, and there is this option is specified;
- Before installing ceiling insulation should be carried out in the country, or you will not save even the most productive element;
- There are elements with a capacity of 1000Vat that will come to an area of about 10 m2.This element then enough and this should be a start.For
area of 30m2 then take two heater.Only they should properly place to achieve uniform heating;
- should take into account the depth of heating.The fact that the higher the power element, the greater the depth of heating and therefore the effect is achieved more quickly.
maximum capacity of the heater is 1500 watts.
It greatest depth.Therefore, a wide room it is most advisable to use.
practice this basic indicators that should guide the choice.In this item there is one significant plus.
purchasing it, you can immediately install and enjoy the benefits of heat.For any stoves or furnaces have a lot of time to install and it is not a small expenditure.
need more care and heating material.Therefore, this element is more efficient in this embodiment.
you've come to be able to warm up the room pretty quickly and not worry about soot and fuel.But the matter of choice, it is your personal priority.