technology drywall on potolokne complex work that can be done by hand.And that reduce the cost of operations.
However, there are some features and nuances that should perform.Therefore, we decided to talk about it.
you can view photos and videos on the subject.It will be offered step by step instructions on this matter.
Advantages of plasterboard
first step is to determine the material of the ceiling finish.Not everyone will come to the room.
Here is influenced by many factors.In one embodiment, this may not be fungible material in another, it simply can not be applied.
This is what we now consider:
- This item has high sound insulation.You can make additional insulation and ceiling, and you can select the materials of any thickness;
- When properly installed, turn a flat surface on which to place the molding and additional elements;
- This fireproof product and you will not have trouble with regulatory authorities;
- can create unique design and implement multi-layered structure;
- not complicated installation, also attracted consumer.It can perform yourself.Help
course required, although it can provide and relatives;
- material is environmentally friendly;
- plane, which is made of this material, and maintains the humidity of the room;
- In conducting the work have the ability to hide the wiring and disadvantages of the reference plane of the ceiling;
- not a high price, it is also the dignity, and not least.For relatively little money, you'll have the perfect surface.
Now, to the debt ceiling was not brought problems, it is necessary to choose the right material.In the retail trade are a few kinds of this product.
And do not be too hard to find exactly what you need. to the ceiling can be used in any principle, only to be repelled from the placement of the structure itself.
- have leaves that are designed specifically for ceiling.This ceiling drywall.
It is suitable for such a finish, but it should not be used in a room with high humidity.It is not designed for this purpose.Although it can be mounted in a room, it is a thin material which has less weight;
- for rooms with high humidity, the most suitable moisture-resistant drywall. Its composition includes mixtures that counteract the formation of mildew.
- Fireproof gypsum plasterboard, it can be applied in a room with a higher temperature.This material has a higher fire safety and such treatment does not lose its properties.
If you decide to apply this material, then the work will be carried out in several stages.It is advisable to carry out all of them in the proposed order.
Acquire materials and tools only quality workmanship, give preference only to trusted brands.
To start, you should prepare a drawing of what you want to do (the lines leading from the ceiling plasterboard - for which it is necessary).We should immediately decide and with lamps.
Because and installation is different for different species.According to the drawing and calculate the amount of material that will be required.
- Determine the kind of material, according to the previously given description.Do not take the sheets back to back, think for 15 percent of the waste;
- correctly make a payment profile.You will need a profile UD, the main longitudinal profile of CD and a CD-profile cross-main;
- not forget that it will take and fixing materials: anchors, anchor, suspensions, crabs, with which to mount the profile;
- Cook and the right tool: screwdriver, Planer, measuring tape, fishing line, polygon;
- After fixing drywall, you will need to do the finish, for its purchase of plaster, trowel primer.
The whole structure will be attached to the frame that it shall be invoked.It should make a regular geometric shape.
It will be fixed all the elements.If you do not, then the plane of the ceiling is not correct.
So you should come to this job with full responsibility.Do for yourself.
Note: Setting the ceiling is done only after the repair of windows and doors.Do not perform this work, do not begin to do the ceiling coverings.
Now we'll show you how to make plasterboard, the technology of its implementation is not that complicated.The most important thing to take the time to properly apply the layout and everything thoroughly vymeryat.
After the operation, all errors will be visible on the plane.And fix anything will be difficult, and sometimes impossible.
To begin, we'll do the layout on which will be performed by fixing the frame to the ceiling.
Note: If you want to install additional insulation, then it should be provided at the stage layout.Remember, lists must not be deformed.
They should be based on tight enough, but do not cuddle .Inache they lose their properties.
- Determine the lowest corner of the room.To this we add the height of the size of the profile and set the mark;
- Now we need to transfer it to other walls.To do this, use the hydraulic level.He let most qualitatively do the job.
Get it at the store or make yourself:
- After transfer this size, all points must be connected to each other.To do this is to use nylon thread.
With the help of this size just bounces along the plane of the wall.We get the exact line of fixture design;
- Technology installation of plasterboard ceilings includes mounting profile UD.It should first be cut into desired size.
This can be done using the grinder and cutting disc.Or just use tin snips;
- After cutting, we fasten the profile of the line installation. To apply this simple screws when mounting is performed to the wood surface.
And if it is concrete, then you should do it with the gun, which should make the holes.After that you should make a fixation with dowels;
Note: It is advisable not to use dowels that are sold in the kit.This material is better to buy separately.Take
dummy plugs to him, less than a couple of screws mm.From the section of plastic.They will provide a more secure fit.
- distance between the point of execution of fasteners should not exceed 35 cm;
- Now do the layout and profile of a guide bearing.To do this, put a line parallel to each other, the distance between which is not more than 1250 mm.
this size corresponds to the middle of the sheet.
Note: Particular attention should be paid to the placement of the profile.That it makes the connection sheets.
Aweigh do not.The profile must be located on the middle of the element.Therefore, before performing layout should take into account these nuances.
- Next guiding profile cut and paste it into the frame.When the attachment make sure that the elements were not placed back to back.
between them should not leave a big gap;
- Mark up the mounting points of the suspensions.Making the connection and fasten it to the user's profile.
This should make the adjustment in height.This is best done between the extreme elements to pull the fishing line.
And it has to do mount.Then it is easier to withstand the horizontal plane of the entire installation.
Suspensions should be placed at a distance of 80 cm from each other;
- makes the installation of the longitudinal profile, the distance between them should be about 50 cm .If mount runs cross, then it can increase up to 60 cm.
Which option is better to use it at the place you choose to conduct the installation.We will examine the longitudinal mounting;
- longitudinal profile Cut into desired size.We put it between the guides already fixed.Apply
step 50 cm. Just pay attention, he does not have to match the installation site suspensions;
- Connection longitudinal profile of the guide is performed by crabs, and they give extra rigidity.But it can also be done differently.
profile is fixed to the carrier two profiles and then insert them in the longitudinal profile.It also will increase the rigidity of the connection ..
If you are using hangers, then from the middle of the set of elements;
ready to install lighting
After installing the frame we have to make preparations to place lighting.We should know what kind of lighting you apply.If
will use energy-saving bulbs, 12 watts.Then you need to install a down transformer.
should be to choose the location of the structure, should provide free access to this Web site:
- find the place of installation the junction box;
Note: All connections in the conduct of the wiring should be carried out by means of the terminal block.They provide a secure fit.
Avoid twists.They will not give lasting contact.
If damage would be difficult to get to this place.So do all the work efficiently.
- Turning off the power at the branch where the work will be carried out and attached to the box that will fit the wire (sm.Uznayte 5 ways how to spend the wiring on the ceiling);
- determines the location and mounting fixtures for the mark on the plane.Then we do the channels for fixing wires.And fixes it;
- makes the release cable on the joints of luminaires;
- Connect lighting to cable.Perform a test switch.
It should be made mandatory.It is necessary to check the distribution of light in the room.
long as you have the opportunity to make changes to the job.After attaching the drywall it is difficult to do;
It should be noted that it is necessary to have the sheets on place of work before the material must dial the desired humidity and get used to the temperature.
- Fastening sheets start from the corner near the window.This is where you can clearly see the quality of the installation.
right light falls;
- sheets are joined not close to each other.It is to leave a small gap.
After fixing it will be treated filler and will not be visible;
- cutting follows.Put a sheet on a flat surface, it is best suited for this table.
Put a ruler and draw a line with a pencil.Then applying for the rail line, which should be flat and hold the line with a sharp knife.
Then displace the sheet from the edge of the table to 5mm.Rail presses and hold the line and cut a sharp push on the edge of the sheet.
He easily breaks on the drawn line.After this process the edge of a plane, it must be flat;
- Along the perimeter of the front part of the plate should be removed to a depth of chamfer 5 mm. This will keep high quality putty after finishing;
- Always put a sheet to the installation site just for trying.Check the correct positioning;
- on site lamps proceed as follows.We put a sheet to the base and mark attaching the lamp with a pencil.
Then remove the item and place it on a flat surface.Make a hole with the help of the Bulgarian and attachments thereto.
During this operation, the nozzle should not be strongly pressed.In this case, it will be a snack stuff and tear.
should make a smooth pressure and not to hurry;
- then applying the sheet to the installation, the wire is passed through the hole and make the material;
After all the sheets are in place, we will do the finishing.
To this solution and preparing putty:
- Take a plastic bucket, it is most suitable for the job, and to pour about 30% water;
- then add it dry mixture and stir at the same time;
- Then take a drill with paddle and mix thoroughly.You do not have to become lumps and the mixture should be smooth and elastic;
- then makes plaster plane;
Note: When applying putty to the joints of sheets, it is necessary to fix serpyanku.She did not give the material to crack when changing moisture and temperature extremes.
- Give surface to dry and inspect.Where appropriate more One coat.
and does plasterboard ceilings, the technology of work and not so complicated.However, you have to work and to get it accurately.
material price is not so high and the work can be done by yourself.Therefore, it is worth trying.
you can do everything wrong.On our site you can read how you can make other types of finishes.