wood as a building material has been used since ancient times.The wooden architecture developed a reasonable combination of beauty and usefulness.
Among other materials used for repairs, wood compares favorably with environmental friendliness.And recently in the interior of the tree gets back his popularity, especially the ceilings of wooden bunks.
methods of fastening wooden structures
made of wood ceilings in the home or at the cottage is not so difficult.Effort and the price is not very large, and the result will please long.
Qualitatively made wooden ceiling does not require frequent maintenance and repair works.Basically, these ceilings are doing in the houses with wooden beams, but it does not mean that they do not occur in homes with concrete floors.
ceiling is made of wood will look good in a classical setting. It can be painted, but it would be better just to cover tinted varnish.
Tip: When choosing the design need to remember that wooden structures are bette
most popular are suspended ceiling made of wood, which are covered grooved rails (lining) or panels.Wood panels "filed" to the ceiling below.
addition podshivnoy often make wooden coffered ceilings.They are small grooves on the surface - caissons.
Caissons can be made entirely of wood, or with inserts of different materials.Also they can have several levels.
their level of well-connected by a high pressure and temperature.Coffered ceiling has long been considered the most reliable, but because of its design and noise insulation.Now
caissons - an element of decor and are made of drywall or wooden caissons used instead of ordinary wallpaper.Traditional coffered ceiling made of precious wood species - walnut, alder, mahogany.
How to install ceiling podshivnoy
First we need to prepare the ceiling: clean it, remove all that was left after the old finish. tree is very sensitive to moisture;to avoid rotting, mounted on top of overlapping waterproofing fabric.
Hardwood floor must be pre-treated and refractory material Bioprotective.
- After preparing the overlap begins work on the installation frame.To do this, first done counting.Step
markup determines the size of the material used for the cladding - wall paneling or panel.
- frame made of beams 30x30 mm.Beam frame should be at the same level.
If necessary, align the position of the boards used wooden wedges or mounting that inciting a bar.The material for the frame is desirable to impregnate the means protecting from swelling - linseed oil, for example.
- frame to the concrete floor mounted screws and dowels with metal sleeve.After fixing plane frame is checked again regulated attachment if necessary.
Fastening panels to the frame
- When the frame is mounted and tested, you can move on to the skin.We prepare material for plating, cutting it in size.Next
putting a board or panel to the frame and fix on the uneven bars.Used for flush mounting nails that are hammered for reliability is not straight, but at an angle.
- in places with increased load for greater reliability using additional fastening screws. Cap screw is forced into the surface below the timber, and then disappears.
When headliner, the ends do not have to adhere to the walls, a small space between them will prevent further cracking and blisters appearing on the possible changes in temperature.
- After lining the ceiling of wooden slats again treated with preservative and then varnish or paint.When varnishing, after the first layer, the surface is smoothed with fine sandpaper to get rid of air bubbles and small villi.Next
cause another couple of layers of lacquer.If the ceiling is painted, you can save on raw materials, using low-cost wood, it will be hidden under the paint texture.
top of the paint, after drying, you need to apply another layer of lacquer.
Tip: Choosing the material can be found already treated with wax.These strips can be used even for installation in areas with high humidity, for example, in the bathroom.The ceiling of a wooden lining -Easy to install, so it is very popular with artists.
coffered ceilings - Installation
design coffered ceiling is quite complicated, since the installation should be familiar with the work of video professionals.Before you begin, you should think carefully about what the ceiling is better to look for clarity, sketches or photos of such samples.
begin work on the installation, as required by the instructions, it is better to center.Initially, the grid is drawn on the ceiling, which will help to nail the boards.
Once the boards are nailed, with the help of caissons filled the empty space between the beam.
Tip: To make the ceiling a finished look, on the edge of the walls set with molding profile similar profile wall caissons.
After that, construction can paint stain to give the wood a dark color. Top varnish.
Do not use gloss varnish.Firstly, it has lost relevance today, and, secondly, glitter gloss bad influence on visual perception.In the center of
coffered ceilings are usually mounted a large chandelier.
Benefits wooden ceilings
wooden ceilings, no matter what kind of were not durable, resistant to external influences (sm.Vidy wooden ceilings, a pick up).The use of natural materials makes them environmentally friendly.
materials that are processed timber, also have no toxic impurities.Ceilings have good heat and sound insulating properties.
They fit well into the interior and have a great view.
make the room more warm and cozy, filling the atmosphere of stability and a sense of nobility.For wooden ceilings convenient to hide the ventilation pipes and wires, as they can easily mount lighting.
to repair the ceiling of wooden slats - it's not so difficult, if desired, they can be easy to handle.When the renovation of the house is made with their own hands, it embraces a sense of joy and pride.
doing it all yourself, you can also save a good idea.