Ceilings PVC installed in a small room for 2-3 hours.The number of angles, the geometry of space and the presence of protrusions determine the complexity of the installation.The work is done
Brigade masters of 2-3 people.His hands a better job to do, it is advisable to trust the professionals.
Next we look at the technology mounting tension ceiling on the example of the conventional horizontal webs of PVC film in a simple rectangular room with no arches, tiers, etc.Cloth stretch ceiling made of special vinyl film (thickness - 0.2 mm).
from it and to specify the size of the cutting is done, the parts are welded together and get ready to outline a ceiling. This canvas size slightly smaller than the measured surface due to the fact that the difference will be compensated after shrinkage (cooling) of the material.
Stretch ceilings made of PVC assembled in accordance with the following installation process:
- Layout premises;
- Installation of baguette on the walls of the room;
- Unpacking the base web and hanging ceiling;
- Fixing blades for perimeter walls in a baguette;
All work is carried out in several stages.Which we now perechmslim.
First of all, on the perimeter of the walls set PVC moldings, which, by and large, can be called and the profile.It is a kind of platform for clues harpoons canvas ceiling.
Profiles baguettes from different manufacturers are slightly different, but they have one problem - safe fixing of the ceiling paintings.Profile for ceilings PVC can be made of aluminum.
Tip!To install the first thing baguette using a spirit level necessary to determine the lowest corner of the ceiling.After that, from this angle is measured down to 1 cm and put a note.
Similarly, in other corners of the room at the same level even put 3 marks;
further corners of the room are measured. Measurements are made using ganiometra (folding protractor) or the selection of zarezok.
In the second case the results will be more accurate.Installing pvc ceilings, the angles measured values must be recorded with an accuracy of up to 1 degree, asdividing the pendulum saws, which are used for has washed down corners of rail profile, is also equal to the 1st degree.
After marking all the necessary stamps mounted prints (aka - PVC profiles for suspended ceilings).
Today, many experts recommend the use of PVC -profile for this job, because aluminum is exposed to all sorts of fumes will oxidize and fade, and plastic profile is not subject to such changes .Moreover, the price is almost the same.So
- Depending on the type, length of rail-profile can vary from 3 to 4 meters.With roulette you need to measure the length of the room's walls;
- If the length of the wall is less than the rack, the rack should be washed down pendulum saw at right angles, and then mounted on the wall so that the top edge of the profile located at the horizon made earlier;
- Installation 4 rails profiles can obtain the full horizontal design moldings that will maximize exactly a suspended PVC ceiling;
- If the wall is longer than the rail, the rail must be washed down in one corner.Missing increasing the length of the additional racks with the same angular gashes.
For sealing the joints between the slats must be filled in using cyanoacrylate glue.
Unpacking and hanging ceiling
Tension ceilings PVC should be installed at a room temperature of 40-45 degrees. canvas ceiling to unpack just in a room that was warmed with a heat gun.
When deploying web it requires a heat gun to warm evenly from a distance of not less than 150 cm. If a heat gun to bring to the ceiling too close, it will overheat and become damaged.
Tip!Expanding web to start with the "basic" angle.This angle using the "crocodile" (special spring clip formed on the suspension ropes course in the form of ticks) clings to the harpoon and fixed in a corner on a baguette.
- The web is gradually unfolds and baguette "crocodile" other corners are fixed in their respective corners of the room;
- installing PVC stretch ceilings, need to know that when the web will be deployed and linked, it is necessary to warm up to a certain level of flexibility.Well warmed easily stretched canvas with a harpoon and well secured in baguette locks.
If the belt will not be sufficiently heated, then stretch it would be problematic, as well as to install. If it overheat, it just pops out of the canvas baguette and nothing can be done.
Heating the entire room when working with the web is not required - it is short and almost not felt, so do not be afraid, because of the ongoing installation affected furniture or windows.
Once will reach a sufficient level of flexibility is made, in fact, binding cloth in a baguette.This is the most crucial stage of work, which is given special attention.So
- install the suspended ceiling PVC, or rather his painting is allowed from any corner of the room.The selected angle is uncoupled from the "Crocodile" on the canvas in the groove harpoon placed corner trowel and using a spear snapped in a profile of baguette;
- clinging angle canvas prints, using a flat trowel to the right and left of the fixed angle snapped harpoon until such time as the harpoon engages in the three locks on each side;
- Similarly, clinging to the opposite corner and the other two corners.Since the ceiling stretch pvc flexible, every next corner will be harder to fix.
After all the angles are fixed, begins hook straight sections:
- First three lock should snap web sites in locations where technical joints ;
- Then loose sites are divided in half and center again latched on three locks;
- So we need to continue until such time as the ceiling cloth is completely fixed in the profile of baguette.If it is not clear that a photo or video of this process see the Internet.
After PVC stretch ceiling will be installed around the perimeter of the room, mounted decorative moldings (or tape) to hide the baguette rack.As soon as the temperature of the web down to the level of the temperature in the room, the tension will happen the effect, whereby it turns out perfectly smooth and level surface.
If you wish, in a ceiling mounted ceiling lamps, chandeliers, built and mounted fixtures, ventilation channels, fire sensors.But for this to work requires assembly instructions, so as not to spoil the ceiling.
It should be noted that their installation is necessary before installation of the ceiling to cook and clean the ceiling fixed on the metal mounting brackets (to determine the location of lighting fixtures can be and after the installation of baguette).
note that for decorate the junction moldings to the wall surface is used PVC profiles for suspended ceilings in the soft version.