In a technical sense, the suspended ceiling is a fabric made from high-strength vinyl is stretched using special equipment and is attached to the walls under the ceiling through the base profile (baguette).As a result, you can achieve a perfectly flat surface of any shape, which has, among other things, excellent performance.
In this article, we will conduct training installation of suspended ceilings, so if you want to learn how to mount their own hands, we recommend that you carefully examine it.
Preparing to install suspended ceilings
preparatory process consists of the following :
- prior to the subsequent manipulation is necessary first of all to prepare the wall.They necessarily have to be aligned, plastered or lined with plasterboard, while the angles between the walls must be clearly direct (see paras. Walls and ceilings - Installation with their own hands).
- Ceiling base, in particular tile joints should be cleaned and the joints zapeneny.On the ceiling should not remain trim, prone to shattering - old plaster, paint, etc. To get rid of dust, it is desirable to treat ceiling surface primed with a solution that will make it more uniform and strong .Do not neglect the above, since then on the back surface of a thin web tension fine grains and elements of the old finish are likely to be clearly visible and spoil the whole picture.
Tip!In the case of wall finishing FCL should take care of its reliable fixation, as created by the stretched canvas peel force will be high enough and drywall can simply break.In the future site of a baguette for plasterboard is better to install an additional firming mortgage profile.
- should also be free from repairable room furniture and other objects that can be affected by high temperature (see. Installation of suspended ceilings - a video tutorial from knowledgeable masters).
Tools for installation of suspended ceilings
training in stretch ceilings necessarily includes the study of the list of required tools and rules for using them.A set of tools for the installation of suspended ceilings as follows :
- Heat gun complete with a gas bottle (you can buy or rent).
- conventional building and a laser level.
- flat and angled spatula.
without any of the tools to carry out installation of suspended ceilings is not possible, each of them must be at hand (see. Installation of suspended ceilings: the main stages).
Technology installation of suspended ceilings
now conduct training on tension ceilings in terms of their layout and directly install :
- After preparing the room and the right set of tools to begin markup.With the level of indoor seek out the lowest corner and near it back down from the ceiling down about 20-30mm and applied to a label.Then, using a laser level and being guided by the label "discourage" the perimeter of the room horizontal and designated marker.
- then intended to apply horizontally drilled strips of plastic or aluminum moldings and attach it to the wall with dowels.The ends of the strips installed beside baguette dock as accurately as possible.
- Then begin production of mortgages in the field of the future installation of spotlights and chandeliers.They are made from suspensions and ceiling plywood pads of suitable size.Embedded attached, so that after mounting fixture is flush with the surface of the tensioned web.
- Next unpack prepared for room size sheet, the room is heated heat gun to gently 50gradusov and cling to the base fabric corner, as well as through its warm-up and stretching - the rest of the corners.After warming to room webs and 80 degrees, it can be mounted in a baguette around the perimeter.For this spatula is inserted into the hollow harpoon and thus introduce a harpoon prints.
- When fastening fabric is finished, check the reliability of the design and give the room cool.
- then attached to the baguette on the perimeter of the plastic and decorative batten mounted spotlights in installation sites mortgages, sticking to the web special plastic rings By doing inside the holes for the installation of lighting fixtures.
It is likewise subject to mounting tension ceiling - installation training, among other things, provides for Their full observance of safety measures, especially fire.Thus, in any case should not be used to operate the heat gun expired gas cylinders, since during heating there is a possibility of explosion.Date of the subsequent inspection of the cylinder indicated directly on it (see. The device suspended ceilings: need for assembly and installation).
You also can not use the equipment, the heat gun and / or a balloon with obviously recognizable damages.Before their use must verify the integrity of gazoveduschego hose and sealing places its compounds.
Tip!Do not direct the flow of the heat gun on the tank.When heated, the balloon should always be behind the gun.
learn the basics of installation of suspended ceilings with their own hands is not too difficult.Much more difficult to achieve a good result indeed, take into account any change and foresee possible problems.To really learn well the installation of suspended ceilings, it is necessary to gain experience, which can be achieved preliminary work assistant Stretch ceiling installer.