not the last place in our lives takes repair their home or office, but as a rule, time is not enough.One-level ceilings are classified as quick and painless repair because it does not leave after the installation is almost no waste.Polyvinyl chloride film for the suspended structure may have a different structure, texture and color, and it is attached to a baguette differently.
Species films, moldings and installation
- polyvinyl chloride film can have a high-gloss, satin or matt structure .Texture can mimic stone, sand, marble, ceramic tile, leather or wood, as well as widely used drawings made by printing on a large printer.
- also on the canvas single-level ceiling can be two colors .This combination is achieved by welding the two webs on the machines HDTV.Suspended ceilings with one level, as a rule, are mounted at the height of the room and the deficit ceiling void depth of no more than 4-5cm (see. One-level plasterboard with their hands: Installation Instructions).
- matt structure suspended ceilings can be called a classic of the genre, as this film does not have a glare and does not attract attention. very convenient to use such a structure to highlight the features of the interior room .Satin fabric can be any shade of the table RAL.
- satin stretch ceiling structurally very similar to the mat, but its surface is smooth, which gives a special contrast of colors and shades to RAL table.For example, white satin ceiling seems blindingly white, and with good lighting gives nacre.
glossy PVC film creates a mirror effect and the room visually seems much more due to the fact that the ceiling reflects all items.Room with such ceilings are not only seems large, but also better reflect the light and as a result, will make it brighter and more spacious.
Baguette for fixing suspended ceilings
- Cam baguette for PVC cloth is fixed at two elements - the movable and immovable. Film inserted with a spatula between the cams and, pulling the internal antenna of the moving part, presses it even tighter to the fixed .This arrangement is good for ceilings with an area of no more than 20m2, as the effect of deterrence is not infinite (see. Baguette for tension ceilings: talk about a frame).
- V-fixing method is most simple and accessible.Vinyl film is embedded in the groove boarding and moldings fixed glazing bead, which acts as a wedge.After installation, the entire fabric fastening systems blocked decorative moldings in the form of decorative strip, which is installed in the adjacent slot profile.
- And finally, the most reliable, harpoon mounting method. Along the perimeter of fabric welded profile in the form of a harpoon, which is entering a landing slot baguette, where the tab is fixed on the basis of the hook .
- This is the long waiting order method as the measurer takes the dimensions of the room (ceiling), and sends the factory where he has welded a harpoon.All of this takes time, but it is the only way in which the dismantling of vinyl fabric is carried out without any damage to the film.
Mounting tension ceiling
- to start determined plenum depth and placing labels using a laser or water level discourage choklaynom control line.Along this line, set baguette shaped around the room.If you want to do the wiring and electrical wires to hide them in the cable channel in the form of a plastic or metal corrugated hose.
- Since we sibling suspended ceiling, after mounting a baguette can only set the console to chandeliers.And you're ready to install PVC.The film clings to the two ends of a baguette and warmed up to a temperature of 70⁰C.
- fact that the critical temperature for PVC - 65⁰C, so it is heated in order to pass this threshold.After cooling, the film takes the form of old, so is stretched Baguette frame.
- Preheat the film with a spatula seasoned prints.In the course of the installation the canvas will form wrinkles, but this is not essential, because the PVC during the cooling compressed and stretched, getting a flat smooth surface (see. PVC baguette for suspended ceilings - the types and methods of attachment).
- into the hole where the lights are mounted, adhesively bonded seals to film not sprawling.
recommendations.Do not mount the glossy stretch ceiling in the bedroom, because at night it perfectly reflected the headlights of passing cars, which will serve as a hindrance to the rest.For a room are good soft soothing tones and photo printing.
If you order two-tone stretch ceiling - Make sure that both parts of the film had the same structure (not the texture) .The difference in the structure will have a kind of lurid, and to attract undue attention.
In those cases, the code sibling tension mounted ceiling with photo printing, or several shades usually used harpoon method of attachment.The fact that with this method the web is stretched uniformly without deforming the picture or a boundary line of color.In addition, this method is the most good for monochrome vinyl.