suspended ceiling in the bathroom should have properties such as strength, moisture resistance, attractiveness.It is convenient by the fact that for him, you can easily hide utilities such as electric and ventilation.
Among the ceilings there are several varieties that may be used in the bathroom.Among them :
- Rack ceiling
- ceiling of moisture-resistant drywall
- ceiling of plastic lining
Now we look at how to make a false ceiling in the bathroom.
of special aluminum strips obtained the most suitable suspended ceiling in the bathroom (see. Suspended ceiling rack for the bathroom: features set and installation).For them, as for any other suspended ceilings, you can easily hide any technical equipment, they are beautiful and not as difficult to produce.
Now you will be given step by step instructions how to install the rack ceiling.
First, mark up the future position of the stringers, which will be mounted rails.For example, the distance
stringers are installed on the spring with a needle, through which you can adjust the height of the stringers.Thus it is necessary to make the control.This can be accomplished by using the water level.
adjust the level using the screwing / unscrewing screws.You can also attach the stringers with long screws.Consider then how to set ceiling with his hands in the bathroom
first panel simply snaps into the stringer.Previously it should be shortened to 30.5 mm from the actual length of the room.Then you measure the distance to the installation of cut panel.
To cut a panel should make a long line several times with the power to hold a sharp knife.To the panel is not warped, it is necessary to cut pieces cut into pieces 30 centimeters long, and, bending back them up and down, break off.Then put on a cutting board with a mechanical wear on her profile.
then set extreme nerezanyh panel.Next, set the remaining slats, which are pre-shortened 3-5 mm from the actual size of the room.
Now let's look at how to install a suspended ceiling with his hands in the bathroom of moisture-resistant drywall.
suspended ceiling of water-resistant drywall
suspended ceilings for a bathroom is rarely made of drywall.However, there are special types of material that can be used even in so wet areas (see. The ceiling in the bathroom plasterboard: features of installation).
to produce false ceiling in the bathroom, you need the following tools :
- crown for large diameter holes
- Building knife
course, also need drywall.False ceilings in the bathroom characterized in that for mounting requires moisture resistant drywall. also need the following items :
- guiding profile
- Ceiling profile
- Direct suspension
- connector for profiles (crab)
First you need to identify the level at which is located a suspended ceiling.If the structure will provide for spotlights, the height of the ceiling should be about 10 centimeters to lamps do not overheat.
To mark the starting point, you can use gidrourovnya.Mark up the zero level, and it will fasten the guide profile.He fastened with dowels, which are fixed at a distance of 50 centimeters from each other.
then mounted ceiling profile.To install it on the guide profile notches made in the region of 60 centimeters from each other. To fix ceiling profiles using direct hangers.They are mounted at a distance of 40 centimeters from each other .
When fixing the ceiling profile, you must use the level.It can be easily controlled, pre-pulling cord.To give the final strength of the construction also makes the transverse web.
Before installing the sheets are cut the desired size.Suspended ceiling in the bathroom is usually not so big, so do not require such large and sheets of drywall.
mounted ceiling for the bathroom as well as in other areas, in the self-tapping screws.First building with a knife cut off thinning.To do this, the line is cut on a cardboard base, then a sheet break in two, second base incision and then edge trimmed plane.Similarly, for marking cut sheets of drywall and elsewhere.
Places drilled under the lights with the help of crowns.Then the joints and fixing zashpaklevyvayutsya and carried decorative ceiling decoration.False ceilings in the bathroom usually color, at least - water-resistant wallpaper paste over (see. The ceiling in the bathroom: the types and installation options).
ceiling of plastic lining
Suspended ceiling for the bathroom can be of a plastic lining.It's just how to disassemble and assemble in the bathroom with their hands.
Thus, we consider how to instal their own hands.When installing a suspended ceiling in the bathroom, you must first define the level at which it will be installed.You can use gidrourovnya.This will be more convenient to work together (see. The ceiling in the bathroom of the plastic panels with their own hands).
then taken ud27 profile and mounted on the perimeter of the room at the height of the marks made.Then, at the height of the profile is fixed scaffold on which will then be attached CD profile.Now, at a distance of 50-60 centimeters set suspensions, which will be attached the profile of the CSD.
This metal frame (see. The framework for the ceiling of plasterboard: design features) on three sides set the starting area, which has a U-shape.Then, cut the length of the room linings and paste it in profile.Along the way, set the wire for lighting fixtures.Wall paneling can be cut with a knife or construction hacksaw.
Last strip is cut with a knife along the building, and is attached with screws to the profiles.This U-shaped profile and is cut along the L-shaped to receive the item is attached by means of white silicone.
Now we have looked at the process of installing a suspended ceiling in the bathroom.Also to your attention you have a video where you can see the whole process with my own eyes, and in more detail to clarify for themselves what it takes.