to ceiling plasterboard was flat, before mounting frame system and immediately, lining is required to produce a high quality layout, according to which the assembly will be the future.
difficulties in counting does not occur even when substantial deviations from the horizontal ceiling, if you know how to use those or other instruments.
So, first things first and in detail.
essence ceiling markup
Goals ceiling layout:
- main purpose of marking under the ceiling drywall is to determine the horizontal and applying it to the wall near the ceiling around the perimeter of the premises to be repaired for latercreate a flat plane hanging from the ceiling plasterboard structures.
- secondary task is more simple and consists in drawing parallel lines on the ceiling concrete base along which will be subsequently mounted carrier profile strips framing system.
Horizontal, indicating the plane of the ceiling of the future should be in the 8-15 cm (installer choice)
It is based on this fact, executes the counting.
Regarding the layout of the ceiling mount for the main profile, here the main thing - respect for the designated step between the lines (60 cm) and a parallel line with respect to one of the walls of the room, as well as each other.
use of various tools and instruments to mark the ceiling
Now consider how to mark the ceiling under the drywall, using a variety of tools and devices.
markup ceiling two-meter building level
Features of the construction level when marking a drywall ceiling:
Simple construction level may be involved, if the dimensions of the room are small and account for up to 30 m2.
- When the level of markup is applied to the wall near the ceiling at a certain height above it and align so that the air bubble appeared to be strictly between the marks, then the marker (pencil) is carried out along the instrument line.
- then rearrange level down the length of the wall and continue the applied horizontal by controlling the location of the air bubble in the instrument.Similarly
line continues until until it is applied around the perimeter of the room and will close at the starting point.
error level for the construction of quite large distances, and using it will be difficult to start and end a line horizontally eventually coincide.
markup ceiling water level
Water level is the most affordable, and most importantly, a reliable means of determining the horizontal .In the absence of this type of device, it's easy to make your own hands by taking two syringes and a thin flexible hose length.
Features markup plasterboard ceiling water level:
- The layout is usually carried out by two people, one of whom holds a first vessel at one corner of the room, the other holds the second vessel from another angle.
- If each of gager took his position, blood vessels open to allow water to be set in motion, one of the vessels put to the wall at the correct height so that the mark was in front of the device the desired point, and fixed in this position.
- second vessel is height adjustable, while the water level in communicating vessels reaches the desired mark on the scale of the device, after which the marker is applied on the wall opposite of the desired mark of division.
- Then Kampmann moved in the same way and make further layout, focusing on earlier put labels.
- When the marks will be applied to all the walls, they are connected by a cord or paint one of the metal profiles for gypsum board ceiling, using it as a long flat line.
For the most accurate layout for gypsum board ceiling, as well as for marking large areas use measuring tools such as laser level, theodolite and level.
However, it is quite expensive devices for one-time purchase that markup is not advisable.
Thus, we can conclude that the implementation of the markup for further installation of suspended plasterboard ceiling in domestic premises is quite simple and quickly realizable using every available measuring instruments.And how to deal with these instruments, we considered in detail in this article.