By facing the ceiling surface is always imposed a fairly high requirements and on the materials used and on the quality of installation.As a rule, the technology unit of ceilings made of various materials is not much different: at the heart of the installation is often the construction of the base frame and subsequent cladding.
However, materials which are used at the same time, always different and are selected depending on the type of finish.Even finishing the ceiling paneling often involves various embodiments.
In this article we will talk about how to sheathe clapboard ceiling and how to choose suitable materials for this purpose.
Batten is a molded product made from different materials and equipped Paso-ridge system connection.When connecting bars lining formed externally virtually monolithic shield .
Materials for lining
most common linings made from the following
- natural wood.
The latter is the most used and popular for a long time.Make it out of various types of wood, but the greatest recognition of the lime and pine paneling.
Pine battens used as a finishing material for interior cottage and private homes, including filing used clapboard ceiling.
Linden lining in most cases acts as a skin areas with high temperature - saunas, steam rooms, etc.The reason is that the timber does not contain lime tree resin, and therefore, rule out the possibility of her soiled.
Molded also varies according to the method of manufacture, drawing Paso-ridge structure, width and grade.
consider the characteristics of different types of lining:
- Molded plastic is produced in two main forms - seamless and with a dedicated seam .
Filing ceiling paneling with a dedicated seam as a result has the same form as the wooden floor.
Tip!If the tree before or after finishing requires additional processing, the plastic lining originally practical and can be adapted to any color, even under a tree.
- Seamless polymer lining has hidden pazogrebnevyh system - after clapboard siding will be made of the ceiling, the seam will be almost imperceptible.
width of a lining or as it is called, PVC panels, which are suitable for the ceiling in the kitchen is typically up to 5 times more than in the suture material.
- MDF panel - wall paneling made of hardboard .Produce it by pressing wood fibers with a further giving the required shape and Paso-ridge device.
The size and shape of the MDF panels are standard, while the color range is practically unlimited.Molded of this type is used in areas not affected by excess moisture, and it is not suitable for false ceilings in the bathroom.
Technology headliner lining
Now came the turn to consider how to sheathe clapboard ceiling with his hands.Furnish, as already mentioned, is carried out in two stages - the first supporting frame is made, the second directly sheathe his clapboard.
rules setting the framework are as follows:
- before installing it is necessary to decide in which direction will be carried out on the ceiling mount lining.
When the longitudinal direction of the room, arrange strips across the frame, with the transverse direction - on the contrary.
- prior arrangement to mark the frame, beating the level of any available means - hydraulic, laser or conventional mounting levels.The frame should be mounted approximately 5-10 cm below the main ceiling.
- Once the layout is fixed aluminum rail profile along the perimeter of the room with dowels and screws.
- Before hem ceiling paneling, it is necessary to form the carcass structure.To do this, the guide is attached to the ends of the main planks of profile, positioning them across the floor space in parallel to each other and perpendicular to the direction of fastening lining.
bearing capacity increases frame hangers, is attached to the ceiling and to the profile section in increments of no more than 60 cm.
Attaching lining to the ceiling frame
Finally, we look at how to fix the ceiling battens:
- cladding panels MDF or wooden paneling, the ceiling is attached directly to the rack first, urging them to each other and the walls, and then the joints with the walls closed plinth, butt cracks - nashchelnikami.
- mount to the ceiling or lining plastic panels in reverse order .First, secure the ceiling moldings around the room, then cover strips (butt strap), and only then carry out the fit and directly mount decorations.
- Wall paneling made of plastic is attached to the frame using a stapler (screws) , hammering staples into the inner wall of the groove, and wood - small nails or screws with a preliminary implementation of drilling.MDF attach short nails with a big hat.
So, we figured out how to fix the ceiling battens previously erecting under it a reliable framework.This work is a little different from other kinds of devices ceilings, not suitable for installation in the kitchen and sure to be the power of even not very experienced installers.Good luck to you repair!