nice and smooth ceiling created with the help of modern wallpaper, like many.But here's how to hang wallpaper on the ceiling do not know everything right.Although much difficulty in this process is not the main thing to know the sequence of actions and some building secrets.
Let's see how to hang wallpaper on the ceiling, so that the result will appeal to all members of the household.For ease of access to the material and its many bribe, and the implementation process of gluing the ceiling is often upsetting, especially visible seams (see. How to glue the ceiling tiles: photo and video instruction for you).
reference: joints between wallpaper - is a natural process of applying them to any surface, which can not be avoided.Wallpapers - this is not the banner and suspended ceiling, which are made without seams.But wallpaper coating the seams, you can cleverly disguise or beat.
clear that thick wallpaper for the walls are not suitable for th
Not to be mistaken with the choice, pay attention to the markings on the rolls :
- ceiling wallpaper weight not exceeding 110 g / m²;
- Light wallpaper for the walls weigh in the range of 110 to 140 g / m²,
- other paper wallpaper weight exceeds 140 g / m².
process of pasting the ceiling
Let's see, from what stage is the whole procedure and how to glue the ceiling wallpaper to get a beautiful surface.In practice, the whole process consists of :
- ceiling measurements to calculate the length of the strips of wallpaper;
- Preparation tools and accessories;
- strip cutting;
- adhesive application;
- Embossing strips of wallpaper on the ceiling;
- Smooth wallpaper and forming joints;
- natural drying.
Stored tools and devices.The adhesive wallpaper on the ceiling will require you :
- wide and narrow paint brush to apply glue;
- sharp knife for cutting the wallpaper;
- capacity for breeding glue;
- plastic spatula to smooth bubbles;
- Cushion rubber for sealing joints;
- square, tape measure and a pencil.
From consumables also need :
- quality ceiling wallpaper glue;
- paper tape to strengthen the joints.
One of the important stages of wallpapering a strip cutting. Depending on the number of windows in the room and their location depends on the length of the strips of wallpaper.After the seams on the ceiling have been less noticeable, they should be glued towards the window .
If several windows in the room, then it is better to hang wallpaper along the length of the room to reduce the number of bands and therefore, the number of joints.
Caution: many tenants, trying to figure the issue of how to hang wallpaper on the ceiling, often forget one building wisdom.This measurements.In rolls of wallpaper always 10.5 meters, and if you miscalculated the band, then you'll have a significant overruns materials.
Another feature - the creation of the reserve.The bands should be cut length greater adhered to the edge of the band went on a little wall.Suffice it to 2-3 cm on each side.Subsequently, they should be cut off (see. How stick ceiling tiles: tips handyman).
To perform this operation it is necessary :
- put the severed strip of wallpaper on a flat surface face down;
- dip the brush in a container of glue;
- carefully rub the glue on the surface of the wallpaper.
Tip: If you kleite wallpaper wallpaper (for example, older), then you should put glue on the ceiling.But it is not wider than the cut strip.
completed all preparatory work, sticking to the ceiling wallpaper.For this :
- displace accordion band, making sure that the front surface of the segment was not in the glue;
- note on the ceiling line for bandwidth (at least 50 cm from the edge of the wall);
- pasted on her paper masking tape (under seal);
- ceiling applied to the strip.Start at the corner, keeping the applied line as a reference point;
- using a plastic spatula overclock (smooths) smooth movements of air bubbles under the strip;
- Prepare the next strip (gluing, folding like an accordion, gluing paper tape to the future site of the seam).
We put it to the free edge of the ceiling and perform the same operation.Then, when the second band is applied and from under it removed all the air bubbles to be :
- hands to pull the seam to a state of close contact;
- with a rubber roller to roll seam (sealed adhesive base).
adhered ordinary wallpaper pattern matching is not critical question.If you have to Wallpapering with drawing, then you need to know how to perform this operation.
for interfacing image is best to cut the size of only the first band from the roll.The following bands should be cut off at the place - putting near pasted strip and noting the cut line (see. How to hang wallpaper on the ceiling: a description of the process and the specifics of the work).
Another important feature - cutting off excess strip.Trying to make this work with scissors always result in an uneven edge.A sharp knife can also spoil the cutting line.
best to attach to the edge of a trowel and on its edge to cut the excess.In this approach, the likelihood of damage to the edges of wallpaper is minimal.
Many also do not know how to glue vinyl wallpaper on the ceiling, because in addition to its advantages, this kind of wallpaper has significant drawbacks - poor water resistance.
for wallpapering is best to use special glue for vinyl wallpaper.In its structure there is a strong and quick-connection that will speed up the drying process and eliminate sagging.
Conclusions: In this article you can learn not only how to hang wallpaper on the ceiling alone, but also how to avoid costly mistakes.But, having learned the simple rules and secrets in the future Wallpapering will be much easier and faster.