- Project Development Installation of lighting fixture
rapid development of new lighting technology has led to the emergence of original techniques, allows you to completely change the visual perception of the volume of residential spaces.Transform your home, you can now upgrade the system due to the lighting of rooms by organizing LED illumination of the ceiling with his hands.To illuminate the living rooms of our time used LED devices (so-called LED-emitters) following well-known classes:
- LED lighting linear type;
- pinpoint ceiling lights;
- LED strip controllers;
- LED-projector type emitters.
installation point led-lamps
Lighters first class are typically used in cases where it is necessary to organize the backlight linear sections of rooms (deaf piers or hidden from direct perception underceiling areas).LED devices of the second type are mounted so that the lamp housing has been recessed into a wall or ceiling, and on the surface was visible only from the
LED backlight room ceilings in an apartment can be organized with the help of directional lamps (like projectors), placed on the walls of the room.Such lamps are available usually in color (RGB), or white and have performed well protected from moisture and dust.
Special LED Strip (in conjunction with the master controller) are designed to produce dynamic color effects with any combination of colors in a palette RGB.
Development Project backlight
The connection LED strip
Development household project that allows to organize the LED light ceiling with his hands, involves a series of preparatory plan for the following operations:
- model selection LED illuminator;
- counting the number of luminaires required (length of tape lighting);
- selection of the optimal scheme of turn lights and ribbons;
- installation of all elements of the backlight.
Wiring LED strip
For rooms with floor area of 17 square meters.meters of the most appropriate option would be the organization of the backlight LED tape with his own hands.Focusing on this option, consider in more detail the general procedure of such a project.
- First of all you should define the zones of placing strips of LEDs that will provide the desired effect to illuminate the room.
- Following this, you can (subject to the selected accommodations) to decide on the suitable model of the product and the required length.At the same time we must not forget that this tape is designed for the multiplicity of cutting 5 cm.
- Further, in view of the operating parameters of the chosen model, you need to find a suitable sample of the power supply and the control modes of the controller.The calculation of the parameters of lighting chains and training schemes for their connection can also be performed independently, using the instructions accompanying the product.
- Upon completion of all these operations, you can proceed to the immediate installation of lighting.
The following footage shows the process of installing LED strip:
at their place of accommodation belt is attached with adhesive mounting layerinflicted on one of its surfaces.After removing the tape with an adhesive protective coating must be applied to the place of its fastening and lightly press.
At the final stage of work you need to connect the built-in room interior LED strip controller, respecting the polarity indicated in the diagram, and join order.Himself master controller connects to the power transformer in accordance with the above scheme.
Thus, everything for LED lighting in the room you will need to stock up on the following hardware products:
- LED tape length of 10-15 m;
- controller RGB (usually supplied with the remote control);
- wires, connectors (special connectors) and shrink tape;
- AC power supply transformer.
In conclusion, it should be noted that the performance of lighting rooms in a wide range of different colors will look much more impressive than a simple (one-color) LED lighting.This will allow you to change the illumination as desired basic color characteristics of the light (brightness and color), which helps to create the room a festive and cozy atmosphere.
offer familiarize yourself with how to connect LED Strip controller:
Option LED backlight
Spot ceiling lights
LED lights corridor
Ceiling lights led
stucco ceiling lights
use LED backlighting
Colored lights ceiling