- Select SIP panel
construction industry is developing rapidly.Already today it is possible to build a large house with minimal cash outlay.Such a structure as a whole is not that expensive studio and the living conditions there are even better.
Choosing the right material for the upcoming construction is not always possible.Many developers do not have sufficient knowledge on materials, so they have to trust advertising.Manufacturers also take advantage of this, praising their goods and insufficiently objective criticizing competitors.Most of the disputes going on around the new technology of construction of buildings - Canadian.
Such composite panels consist of a pair of special plates with a layer of insulation between them, which is used as polystyrene or foam.Developers draws the material for its properties, as well as the speed of the construction of his house.He also has disadvantages, which appear after the House of vult
advantages - speed of construction
prefabrication - quality assurance of the future structure and an essential condition for reducing the time of its construction.Collect SIP panel factory with modern equipment, allowing you to control the strength of the assembly.As a result, equipment is selected so that in the amateur builders had no opportunities, because you could end up with marriage.
How to build a house of vulture panels should know and be able to do, and customers.You need only know how to use a hacksaw and screwdriver.In general, this will significantly reduce the cost of construction.Another important advantage of assembling technology of data structures is the ease of joining material.
Sip panel light enough material, so there is no need heavy foundation.For our buildings would be enough pile foundation on top of which is necessary to lay strapping timber.
On the basis of the resulting stacked and fastened with screws starting board, and then you can install the sandwich panels.Connect the material well-known principles of tongue and groove, so the house of vulture panels built with his own hands easily.
If you choose a strip foundation, then the assembly should be carried out slightly differently.With this embodiment, the board fixing banding should be carried directly to the composite panel to the beam and not, as in the previous case.
roof of vulture
Similarly, the connection wires and vertical seams.With proper handling this method is suitable for the installation of the roof and floor.As a result, we have gained a strong structure without gaps through which could infiltrate draft.House vulture panels easy to build with his own hands, and the result - robust design, which has high thermal insulation performance.Such structures do not shrink or crack, that is their clear advantage.
saving construction is possible also on the characteristics of the material, so they let it be laid without special equipment.Wet technology in the assembly is not used, so the construction of houses made of vulture panels is offseason.
trim panel house
To finish the masonry structures would require more energy than in our case.The walls are made of panels are obtained vulture smooth, so their skin does not require leveling plasterboard frame.
The sandwich panels are easy to screws and nails and securely held there, that allows the use of any material, whether natural stone, wood paneling or ceramic tile.In the Vulture panels perfectly kept and adhesive mixture.If the floor in the house is made of our material, it is possible to lay parquet, tiles oblitsevat or to lay linoleum.
Select SIP panel
Select vulture panel
manufacturer must be chosen carefully assessing the quality of materials used.To build the necessary tile panels OSB-3 with a high moisture resistance.Also, it must have a level of formaldehyde emissions E1 or lower, which is safe for the health.In the middle of Sip panels must be self-extinguishing foam or polyurethane foam.
Sandwich panels - a material not permeable to water vapor, so the structure of it more like a thermos and needs regular airing.SIP panels have low soundproof performance, although manufacturers and insist on good sound absorption foam.How to build a house of vulture panels we found, but still need high-quality interior materials with noise absorbing properties.
Since the weather is unpredictable, and the construction will take at least a week, it is necessary that the ceilings are drainage holes.It is also recommended to look at the quality of the edges of the painting panels.
Fire resistance of structures from sandwich panels are not very high, so the construction of communications should seek independent electrician to help avoid problems.Also it is necessary to take care of the fire alarm in each room.It is useful to be and temperature sensors.
As a result, we found that the CIP panel, though the good stuff, but still has its flaws.To avoid problems help some materials that will need to impose additional structure.
offer to see the video and learn about the advantages and disadvantages of vulture panels.