- Technology laying
- Substrate Preparation
- primer coating base layer
- drawing figure
- Fill topcoat
Thinking about major repairs, you're bound to come across the need to change sex.Who became popular self-leveling floors and 3d floors.In this article, we'll show you how to do self-leveling floor with their hands in order to save the family budget.
3D Floor - dandelions
Polyurethane outdoor decorative coating different from the usual self-leveling floor coated with a picture.
figure is applied to the base substrate over which is filled with a polymer layer.Thus an effect of three-dimensional images and the depth is changed by the thickness of the final coating.What is shown on the floor, you pick yourself, based on personal preferences and imagination.
Optimally will entrust the manufacturing process of the floor to professionals, but strict observance of technology can cope on their own.
three-dimensional stacking te
- Substrate Preparation.
- coating the base layer.
- drawing figure.
- Fill topcoat.
floor preparation for 3D
for mounting a three-dimensional self-leveling floor needed a prepared concrete screed.
Step by Step:
- concrete base is processed using a grinder, large lumps are removed using a chisel.
- All bumps and potholes are filled with cement or epoxy resin;
- Upon completion of repair work, the surface is cleaned of debris and obespylivajut vacuum cleaner.
Primer floor brush
Primer floor roller Priming the surface is carried out after its purification.For that purpose the compounds are capable to fill all the gaps and cracks in the concrete base.This provides a better grip the floor with a base polymer.
primer solution is applied using a flat brush, spatula or a short nap roller.The primer is applied in two layers, before applying the next layer has to dry thoroughly first.
coating base layer
process of arrangement of the inlet floor In the manufacture of three-dimensional coating as base coat can be a screed or polymer mixture.Due to its special properties of the polymer coating is an optimum basis for printing and editing 3D floor.
If desired setting self-leveling floor with natural and man-made materials, the basic coverage will serve as a backdrop, and according to its color and quality of the installation should pay attention.
polymer base coating is applied as well as the conventional polymer flooring.The main requirement is the absence of air bubbles and flatness.Flatness of the surface is achieved by means of periodic inspection of rules and building level.
Putting figure on the floor
figure is applied to the base layer prepared by one of two ways: painting or sticker image.Drawing pictures is more expensive option and executed or acrylic polymer paints, resistant to ultraviolet radiation.Services artist will cost much more expensive if you do not have artistic talent.In this case, your floor is unique and individual.
Inflicting image, wait until it is completely dry before applying the protective layer.
most popular way of printing on a polymer base is considered to be the sticker.This is done by processing the selected graphical image and printing it on a carrier, which acts as a banner fabric or film of vinyl.
Poured floors - bubbles printout drawing can be done in printing.
drawing figure occurs in several stages:
- base layer is treated with primer, which may serve as a finishing polymer coating with a solvent in a ratio of 2: 1.For the polymerization of the primer is left alone for 24 hours.
- worth a responsible approach to the vinyl label images on the basis of which shall be made without the formation of air bubbles in the process.It should be firmly pressed against the film and smooth during operation.
- image on a banner fabric is fixed to the surface using an adhesive applied in thin layers.
This patterning is completed.
3D structure of the inlet floor
count the number of pre-polymer layer to cover the basics of the finish.The greatest importance is the thickness of the coating of the future, which should not be less than 3 mm.At this thickness, processing Q1.meter is required about 4 kg transparent polymer blend.
process of applying a finishing layer:
- 2 liter tank mix all the components that make up the mixture.This work perform a drill with paddle;
- floor coated image covers the prepared mixture evenly;
- level the surface according to the technology;
- In order to get rid of air bubbles, it is necessary to roll the applied layer with a spiked roller.This process continues as long as the floor is not nachet solidify.Typically, this requires 15 to 30 minutes.
Alignment and rolling the floor can be done by walking on it in shoes with spikes.
3D Floor - flower meadow
wait for the final polymerization and hardening floor transparent topcoat, the surface treated layer of protective varnish.
lacquer layer is needed to make the surface more protective properties that protect the coating from external mechanical factors, thereby increasing its service life.If desired, you can choose the varnish that will make self-leveling floor anti-slip.
Care three-dimensional floor does not require any special difficulties.By applying the lacquer surface becomes dirt-repellent properties, so it is sufficient purification process it with a damp cloth or a special sponge.Since the varnish has protective properties, you have the ability to use cleaning and detergents.
If you come with the responsibility to study the process of laying a three-dimensional self-leveling floor, the final result will be original and unique.Thus, you get the original flooring, which will make your interior correspond to your desires and taste preferences.Despite the fact that this work requires a large investment of effort and patience, the result, no doubt, will meet them and will please you for a long time.
This footage is presented step by step installation of self-leveling floor 3D: floor preparation, fill the base layer and patterning:
Interesting design of the inlet floor
Interior withPolymer Flooring
Design floor fillers
3D technology in the design of floors
3D bathroom floors
3D floors - the view from the bird's-eye view
3D Floor - seabed