- foam polyethylene
- Heaters fiberglass
- Basalt wool
- Liquid insulation
- When you need to take care of pipe insulation Repair insulation
During heating the liquid, which is used as a coolant is circulated through the system.In order not to lose the useful heat and avoid excessive overheating of the room, carried out insulation of heating pipes.
Such work is needed in country houses, if the line of heating pipes pass on the street from the boiler room, or when the boiler is located in the far wing of the building, and the pipes are stretched on the cold aisle.This helps to deliver more heat into the room, keeping it on the whole route from the boiler to radiators.
The material used several types of heaters, they differ in thermal conductivity and methods of installation, and the choice of material should at least know a little bit about his qualities.
Foil polyethylene foam
It is a flexible insulation,
with insulation pipe this material, pieces of insulation superimposed on the entire length of the tube, and shrink construction tape.The joints or pipe connections must close insulation thicker diameter.Therefore, before any work is about to calculate the necessary amount of insulation in different sizes.
Such insulation most in demand from builders.This material has a relatively low weight and did not rot.That is why it is often used for insulation of pipes located on the street.
When installing insulation wrapped pipe and fix it with the binding wire.For added protection against moisture from the outside tied it with roofing material or foil construction.
It shaped heater elements, which are made in the form of plates and cylinders.Such heaters are fireproof, have good strength and do not absorb moisture.Mounting it is quite simple, as in the case of fiberglass insulation it additionally protect the aluminum foil or roofing felt.
Such insulation is manufactured in the form of two shells of different sizes, they are fastened by means of special grooves, but the reliability of the connection must be additionally fixed with special glue or tape.
When connecting pipes to the insulation halves interconnected and displace two pieces in different directions by a few centimeters.The next link is also connected, and the left ends are joined together, it turns a kind of "overlaps" one connection to another, which provides a better bond.
For warming awkward plots and twists used - shaped shell, which are unequal in size.
This insulation is applied by spraying.Specially prepared was sprayed on the pipe mounted.It adheres firmly to the surface and foaming forms a dense protective mass having high strength.
Due to the fact that the insulation does not tolerate sunlight warming his pipes located outdoors, they should be accompanied by protection: wrapped with roofing material or aluminum foil.
Liquid insulation pipes
This material, which is carried out by means of heating insulation of pipelines, would eliminate some of the difficulties encountered during the installation of other heaters.
The more, the better ...
This slogan refers to the installation of such insulation.Apply it with a brush spray or regular, and the more layers will be applied to the pipe, the better it will retain heat.Yes, and the process is much easier to mount other types of insulation.It can easily be applied as a smooth pipe disposed in good availability and uncomfortable on the latent portions.
When you need to take care of pipe insulation
best to make the installation of insulation in piping and branching in the room.At this stage, it will be easier to select the dimensions (when roll or tubular heater), and as a result will be less waste and that accordingly - savings.
Replacement insulation pipes
With all the positive qualities of all kinds of materials it is useful to carry out routine inspection of the entire line before the onset of the winter heating season.To avoid trouble in the future, space heater, which as a result of any circumstances come into disrepair, it is necessary to replace.
Video Video Installation cylinders of mineral wool:
use liquid heating insulation
Insulation TechniquePipe scheme
Warming basalt wool