- composition grout
- Types mortars
- Manufacturing solutions
is well known that for the preparation of cement mixture of classical initial three shares of sand are mixed with oneCement shares.But there are other kinds of mortars, the proportion of which are markedly different from those listed above.In this article we will tell you how to properly plant the cement, that is, the proportions in which the initial components should be taken.
slag waste cement slurry used in the course of construction activities, a plastic mixture, which consists of a special binder (cement) and a filler of a particular type.Furthermore, this solution is added water, as it evaporates finished material which solidifies and eventually is transformed into a monolith.Cement is widely used during construction of the generalist.Note that the solution is prepared most often used in the construction are simple and mixed.By simply compiling accepted to cement and mortar, and
- river or quarry sand;
- slag waste;
- small pieces of stones;
- sawdust and others.
Mortar for masonry
for its intended purpose all mortars are divided into the following categories:
- foundation solutions used in the regeneration of concrete foundations;
- solutions used for brickwork, and for coupling of other construction materials;
- cement screeds;
When manufacturing cement mortars sand and cement are mixed usually based on the proportion of three to one, resulting in a homogeneous mass of gray.In the manufacture of the bases are special types of cement, and as a filler can be used, such bulk materials as gravel, schebёnka or expanded clay.
solution for the foundation
To prepare cement screeds main components of the prepared solution (cement M500 and well cleaned sand) are also taken in the classic proportions of one to three.Laitance used during a series of finishing operations and is a mixture of cement and water in a proportion determined by its intended purpose.
solution Mixing cement To prepare the grout used wide capacity or hewn planks of the pallet, which in turn bombarded first layer of cement, and thena layer of sand.For the convenience of preparing a mixture of the number of such layers can be increased to 6, allowing you to mix thoroughly both its components.When ready dry mix in small doses it is added water and then thoroughly mixed the resulting composition to form a homogeneous mass.For masonry solution needs a thick consistency, and to fill the sexes - more liquid.
In conclusion, after figuring out how to raise the cement, you can easily do the following:
- training foundation;
- plastering the walls;
- manufacture cemented, etc..
Video footage presented in the following material for the preparation of cement mortar for masonry: