- Pontoon type of bottles
- Pontoon berth type of metal barrels
- Stationary berth
for people living next to the river, or pond alwayspressing question was easy access to the water.Previously, these goals were building bridges, which could go to the tied boat, now such a device which is rarely applied.Basically buildings erected more serious, requiring more effort and ingenuity, especially when the question is how to build a pier with their hands quickly and inexpensively.We are not talking about the ingenuity in vain, because this is exactly what many have resorted craftsmen, creating a pier.Consider a few different designs makeshift piers.
Pontoon type of bottles
berth pontoon type of bottles
Such a device is the easiest to do.Will serve as a common basis for two-liter plastic bottles, the amount of which depends on the size of the planned pier.In order to start work zagotovte 300-350 bottles (using their bottles polutoralitrovyh may take longer, because they
sure to check that the plugs are firmly tightened, and the bottle was no hole.To do this, the preparation for installing the bottle, try to compress, and if it has remained resilient, it's okay.Pier foundation do not integral, and of the three units, at 60 - 80 bottles in one section.Also on the sides of the bottles have to do guides.
can now be made of light boards or foam to make the pontoon deck.This floating structures must be securely fastened, or a strong wind can carry it easy.To do this, on the banks of two pile hammer, to which attach securely the pontoon.
This design is not difficult and can be removed in the winter berth.
Pontoon berth type of metal barrels
berth of metal barrels
And now look at how to build a pier with his own hands from the barrels.Immediately it should be noted that this design is best to gather near the water as its weight it big, and go to
And now look at how to build a pier with his own hands from the barrels.Immediately it should be noted that this design is best to gather near the water as its weight it too big, and to go with her on a long journey is not very convenient.In order to make this dock, you will need:
- Planed boards.
- wooden beams.
- 200-liter barrel - 4 pcs.
- nails (or screws).
first stage of work is a manufacturer of timber frame, the size of 2.5 × 2.5 m, having a section of 100 mm × 50 mm.Clamps can serve long enough nails to breaking through abraded boards, they could bend and make the connection stronger.It is useful to enhance the design, inserting the corners of the frame pieces of wood.To the main frame, add additional support of six wooden bars of 50 × 50 mm.They must be set so that the edges barrels resting on them.
Now we need to examine the barrels.Note that the tube was tightly closed.For greater certainty, that at this point the connection is not vented, smear the threads and silicone rubber seal, then firmly screw in a barrel.
barrels prepared place in the corners of the frame parallel to each other, and by drilling 6 holes for each barrel, secure them with ropes.While the design is not very heavy, take it to the water, setting down the barrels.Securely attach near the shore, continue sheathing.The final step will be the production of the bridge, so that you can get from shore to dock.
In that case, if you need a more powerful design, do a stationary dock, which would require screw piles.
In order to make this dock, you will need:
- Screw piles - 6 or 8 pieces.
- corner of sufficient strength, the amount of which depends on the size of the structure, since the large width of the span required to weld additional jumpers;
- Planed boards (25-30 mm);
- nails, screws or bolts and nuts;
- welding machine.
works better to produce in the winter, when the river is ice, because in order to spin the pile to a greater depth will require a lot of effort.Agree that the boat will not be easy to do, because at first it must be securely fastened, and then deal with the piles.It piles weld area, and with a small gap, which will provide good water drainage and ventilation, attach the board with nails or screws, but better with a screw nut, placing the puck.If you are not afraid of theft, you can use copper fittings.
berth original form
in if the screws are made of steel, in order to prevent rust, after clamping tighten each screw protruding tail piece of hose soaked NIGROL, or after drying the board, youYou are able to pull it.Otherwise, all the rust, and a year later the board will rumble.Do not forget to treat the wood preservative.Now you can enjoy high-quality long pier.
offer watch a video about the self-construction of the dock of steel drums.